Reviews Brass Relief Valve

3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass, 3/4 Inch Service Installation Valve for rheem,rinai,ecosmart,navien,noritz,takagi,bosch.

  • 【Product Features】3/4 inch IPS isolation tankless water heater service valve kit includes hot and cold isolation valves(600 WOG) and pressure relief valve (150 psi/200K BTU). Colored valve handles for easy identification and use of hot and cold valves. Integrated drain valve with brass safety cap providing easy maintenance. Full port ball valve for better flow rate..
  • 【Widely Use】: The 3/4 inch size tankless kit is suitable for most American residential use, including domestic and commercial tankless gas water heater brands such as Rheem,Rinai, Ecosmart,Navien,Noritz,Takagi,Bosch and so on..
  • 【LEAD FREE Certification】: The components are certified lead free. Meets all federal & state standards for lead levels in drinking water system components. You can also find the CSA certification on the pressure relief valve to prove its authenticity..
  • 【Excellent Integrated Design】: Thickened brass body, gravity forging, one-piece forged brass body can effectively prevent any leakage or dripping, the main isolation valve group has passed a leak-free test before leaving the factory ,and can be used for a long time..
  • 【Quality Commitment】: 100% full refund. If you don't like the product or it is not the product you want, please don't rush to leave a r....
Check Stock

Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

  • Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
  • Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
  • Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
  • Made of brass. Max. inlet pressure of pumps is 200 PSI..
  • Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • ...ter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handle....
Check Stock

Webstone 44443WPR-LF 3/4' IPS Isolator EXP E2 Tankless Water Heater Service Valve Kit with Clean Brass Construction

  • Lead free - meets all federal & state standards for lead levels in Drinking water system components.
  • 3/4 IPS lead free isolator EXP E2 with lead free pressure relief valve.
  • Hot and cold set tankless water heater service valve.
  • Full port brass ball valves with adjustable packing gland.
  • Hi-flow hose drains ( 500 WOG) &pressure relief valve ( 150 psi/200K BTU).
Check Stock

Pro-Force FT10 10-Gallon Portable Air Tank

  • Equipped with air pressure gauge, air line shut-off valve, pressure relief valve, easy access fill valve, 3-Feet by 1/4-Inch air hose and air chuck.
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank

  • ...ter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
Check Stock

MC Enterprises 91365MC Ignition Module for Dometic Water Heaters (Replaces 93851MC)

  • 【Standard 1/2'' Size】The thread size of our rv water heater drain plug is 1/2" NPT male threads, this RV water heater replacement drain valve great replacement for your RV water heater.
  • 【Additional Teflon Tape】Teflon tape is a necessity for replace hot water heater valve, made of PTFE material, has a sealing function to prevent the leakage of water.
  • 【Brass body and Steel Handle】The body of the drain cock is made of high quality brass, the top of the drain cock is made of hardened steel. Heavy duty hardened steel material and good structure can ensure that the rv water drain valve can provide long term service.
  • 【Perfect Replacement】This upgraded water heater drain valve is ideal for RV, camper, and trailer water heater, this rv water tank drain valve effectively solve your leakage problem on the water heater..
  • 【Tips】You should flip open the hot water pressure relief BEFORE draining. That will take any pressure off of the tank. And add thread tape to both the large and small nut before you install.
Check Stock

American Standard CE-12-AS 12 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

American Standard CE-20-AS 19 Gallon Point Of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...OUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets..
Check Stock

CGOLDENWALL Eye Wash Station Wall Mounted Eyewash Station Eye Face Washing Station for First Aid 304 Stainless Steel+ABS coating+Eye Wash Sign, NPT thread

  • 15 gallon stainless steel pressurized tank. Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve. Tank has about 10 gallons usable capacity.
  • Two GS-Plus spray heads, each with a “flip top” dust cover, internal flow control and filter. 1/2” IPS chrome plated brass stay-open ball valve with flag handle.
  • Drench Hose: Single GS-Plus spray head with “flip top” dust cover, internal flow control and filter. Chrome plated brass squeeze valve with stainless steel lever handle and 6 ft. reinforced PVC hose.
  • Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in field.
Check Stock

BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank

  • ...of 3 pounds, the unit comes with rubber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI..
  • 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve.
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple asse....
Check Stock