Reviews Brake Shoe Bracket

MOSNAI Club Car Brake Shoes Spring Kit Fit 1980 UP DS & Precedent Club Car Brake Kits Golf Carts Brake Shoes Kit Gas/Electric 1018163-01, 1011466(2 Sets)

  • ✅High Quality Club Car Brake Shoes Kit Fits 1980 UP Club Car Gas Or Electric..
  • ✅Fit For: Club Car Brake Shoes Spring Kit Fits 1980 & UP DS & PRECEDENT..
  • ✅Fit For: Club Car OEM # 1018163-01,1011466,After Market #S 4324, 4333, 5162, 5219..
  • ✅12 Pcs Club Car Brake Shoes Kit Includes:(4) Brake Shoe Clamp Sprins,(4) Brake Shoe Hold Down Pins.(2) Bottom Brake Shoe Spring, (2)Top Brake Shoe Spring.(For Two Sides,One Cart).
  • ✅Package Include: 2 Sets Club Car Brake Shoes Spring Kits For One Golf Cart. Easy Installation..
Check Stock

Dr.Acces Golf Cart Brake Shoes Spring Kit for Club Car Brake Parts for Club Car DS (1981Up) and Precedent Gas/Electric. Replace# 1018163-01, 1011466

  • Golf Cart Brake shoes Spring kit including:Brake Shoe Clamp Spring x2,Club Car DS / Precedent Brake Shoe Hold-Down Pin x 2,bottom brake shoe spring x 1, top brake shoe spring x 1..
  • Fits the Following Gas & Electric Models:Club Car DS 1981-Up,Club Car Precedent 2004-Up,E-Z-GO 1982-Up,Yamaha G1/G2 and G9 Models Up to 1992.
  • Replaces Club Car OEM Number(s): 1018163-01,1011466-1/2.
  • If you need to install 2 brakes, please purchase 2 sets..
  • These springs wears over time and needs replacing to improve your stopping power..
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

Elite BMX Bicycle 18', 20' & 26' Model Freestyle Bike - 3 Piece Crank (Oil Slick, 20')

  • ...). The 20″ is suitable for 11+ year old (4ft to 5ft 10″). The 26″ ( 4ft 2″ to 5ft 10″ /16+ in age).
  • 18″ Specs: FRAME: Hi-tensile steel (” Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9TBRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 18×2.4″.
  • 20″ Specs: FRAME: Hi-tensile steel (20.5″ Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. WEIGHT: 26.2 lbs. TIRES: 20×2.4″.
  • 26″ Outlaw Specs: FRAME: Hi-Ten / Cr-Mo. FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 2 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 26×2.4″.
Check Stock

tianfeng Rear Brake Caliper For Kawasaki Mojave 250 KSF250 Lakota 300 KEF300 Tecate 4 KXF250 With Pads

  • This is a brand new aftermarket rear brake caliper.
  • Fits car type:KAWASAKI Tecate 4 KXF250A 1987-1988,Mojave 250 KSF250A 1987-2004,Lakota 300 KEF300A 1995-2000,Lakota 300 KEF300B Sport 2001-2003.
  • KSF 250 Rear Brake Caliper,KEF 300 Rear Brake Caliper,KXF 250 Rear Brake Caliper.
  • Includes a set of brand new brake pads and parking system..
  • Note: This is a replacement part. The caliper bracket could be slighty different.the bracket on this item can be easily removed so the old one can be installed onto it.
Check Stock

Sydien 6 Pack 1-inch Dia Non-Brake Swivel Caster Wheels Rubber Base with Top Plate

  • ????WIDELY USE: Suitable for the installation of desks, sofas, coffee tables, computer tables, shoe cabinets, small shelves and other objects in offices and homes. Applicable in small machinery, trolleys, furniture and rack, etc..
  • ????Total Size: 34mm*34mm*36mm/ 1.33″ * 1.33″ * 1.42″(L*W*H).
  • Wheel Size: 25mm*12mm/ 1″ * 0.49″(D*T)..
  • ????PACKAGE CONTENT: 6 Pcs x Rigid Caster Wheel & Some Screws.
  • ????ROLLING QUIETLY & SMOOTHLY: The wheels are wrapped in high-quality environmentally friendly TPR rubber material, which can keep silent while sliding and will not hurt the floor. It can roll smoothly and save your effort when pushing heavy objects..
  • ????ANTI-RUST & LOAD-BEARING: The bracket of the rigid caster is made of metal with high hardness. Each wheel can carry a weight of 10kg(22lbs). The surface of the bracket adopts chrome plating technology, which can improve its abrasion resistance and better rust prevention..
Check Stock

LED High Power Video Light (Super Bright) for Sony Handycam (All Models)

  • Runs Cooler, Brighter, And Uses Less Energy Than A Standard Bulb. Emits A Bright White Light. Enhances Colors Of Videos & Images..
  • Light Mounts on top of Included Aluminum Bracket Allowing Proper Height For Eliminating Glare Directly On Subject. Measures Only 5" High, Lightweight & Very Durable. When Not In Use Folds Flat To Easily Store In Your Bag. (Please Note: Most Sony Handycams Have a multi-interface or a standard hot shoe for a light. The Proper Adapter Will Also Be Included So That You May Mount The Light Directly On This Shoe Or On The Bracket. For Those Without A Hot Shoe The L Bracket Will Be The Solution For Mounting..
  • The Super Bright LED Features A 65° Angle Of Coverage With A Distance Of Approximately 25 Feet. Color Temperature Of 6500K..
  • The Included Rechargeable Lithium Ion Battery Is 1500 Mah (2 Hours Of Continuous Use) And Comes With A Wall Charger..
  • This Item Includes: 1. Video Light 2. L Shaped Bracket 3. Flat Bracket 4. Rechargeable Lithium-Ion Battery 5. Wall Charger 6. Sony Mult-Interface Hot Shoe/Standard Shoe Adapter.
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

AONMTOAN 2 Inches L-Shaped Plate Swivel Caster, with Brake TPE Rubber Caster, Side Mount casters for Loading Capacity 200 Lbs Suitable for Flower Stand, Furniture, Bookshelf,Set of 4

  • HIGH-QUALITY MATERIALS: Durable thermoplastic elastomer (Tpe), built-in bearing, does not hurt the floor, the movement is silent..
  • SIZE: L-shaped bracket About 1.5"×1"/ 38×25mm(L×W), mounting height is about 2.58"/65mm, the diameter of wheel is 2"/50mm..
  • CARRYING CAPACITY:Heavy Duty Ball Bearings, 50 lbs per wheel bearing, 200 lbs (pack of 4)..
  • UNIVERSAL ROTATION:360 degree swivel casters with brake lock ，Glides on easily without scratches or noise..
  • EASY TO INSTALL L- SIDE MOUNT CASTERS：Wide range of applications， Brake casters for small equipment and small space furniture, including coffee tables, plant racks, bookshelves, shoe boxes, toy boxes, shopping carts..
Check Stock

2Pack Updated Flash Bracket Flash Stand Light Stand Bracket Mount with Umbrella Holder Mount Swivel for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Speedlite Studio Light LED Light

  • 2Pack of Flash Bracket for Most Flash Speedlite- This flash bracket combines a universal E Type Flash cold shoe bracket (updated), Swivel light stand....
  • Your Expensive Flash will not Fall - Updated Universal Cold Shoe Bracket on top, the cold shoe will catch the flash shoe base firmly without dropping....
  • Umbrella Holder Mount- This flash bracket is with a hole with locking screw in middle specially designed for holding umbrella..
  • Light Stand Bracket Mount- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20....
  • Easy Adjustment- This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different....
Check Stock

Tobefore 2 Pack Brake Bracket Adapter Disc Brake Bracket Converter Bike Components & Parts Bicycle Disc Brake Mount Mountain Road Bike Modification Brake Bracket Frame Adapter Mounting Holder 20mm

  • Quality Material: Tobefore bike brake kits are made of high quality stainless steel for maximum durability, safe, durable for long time use..
  • Easy to Install: Tobefore bike disc brake adapter is very easy to install and disassemble, without worrying about your hands-on ability is not enough.....
  • Appropriate Size: Distance between two holes: 51MM / 2.01inch. Bicycle disc brake bracket can refit normal bicycle to update into disc brake bicycle..
  • Application: Tobefore brake bracket adapter is suitable for the application from ordinary bicycle to disc brake bicycle. Suitable for any type of....
  • Warm Tips: Pay attention:it needs to be used with disc brake. If you are unsatisfied with it, please contact us. We will solve it for you immediately..
Check Stock

Vello Speedy Camera Rotating Flash Bracket with TTL Off-Camera Flash Cord for Canon EOS Cameras (1.5') Kit

  • Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length:8”, Net Weight:3oz. If you have any question with your order,please feel free to contact us..
Check Stock

M-GRO Adjustable Inline Skates for Kids Boys Girls and Youth with Full Illuminating Wheels,Outdoor Roller Skates for Adults Women and Men,Fun Flashing Beginner Roller Skates for Kids

  • ...IGH MATERUAL - diamond mesh honeycomb vamp, long wear without deformation, 360 degree cycle breathable and comfortable.It also adopts high impact PP material hard shoe shell for comfort and soft cushion for anti-collision and shock absorption, which is safer..
  • DURABLE AND STABLE - using 0.1 inch thick aluminum alloy bracket, full perfusion molding, can better support the shoe body, more stable use more assured.The wheels also use high speed silent ABEC-7 bearing, high wear resistance, longer use, more durable..
  • SINGLE BRAKE AND FLASH WHEEL DESIGN - right foot single brake design is essential for beginners, can be used in sliding dexterity, prevent falls.The flash wheel is automatically lit according to the power generated in the wheel sliding, with magnetic core, to add color to shoes, and can bring joy to children..
  • ADJUSTABLE MULTIPLE SIZE - a pair of shoes can be adjusted to different sizes.Choose the right size according to the length of the foot and adjust it to a comfortable size.Because children grow quickly, a pair of shoes can accompany them for a long time, continuously increase the fun of playing for children..
  • SUITABLE FOR ANYONE AND THE PERFECT GIFT - The inline skates are suitable for boys, girls, children, teenagers, adults and can be used....
Check Stock