Reviews Brake Piston Assembly

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about your brake caliper piston tool getting mismatched and lost in a drawer.
  • Caliper piston compressor tool packaged in a heavy-duty 14.5” x 2.5” x 11” inch (36.8cm x 6.4cm x 27.9cm) plastic blow-molded carr....
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • ... and to prevent damage to your brake components.
  • Reverse tool movement to retract compression plates by flipping the switch on the handle.
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability.
  • Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency.
  • Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates.
  • Larger plates are held in place with built-in magnets for easy attachment and removal.
Check Stock

ACDelco Professional 18M1884 Brake Master Cylinder Assembly

  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality.
  • Pressure tested to ensure safe and confident braking.
  • no extra stress on the brake boosting mounting.
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear.
  • Cast iron and aluminum specifications provide no extra stress on the brake boosting mounting.
Check Stock

ACDelco Professional 18M2456 Brake Master Cylinder Assembly

  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality.
  • Pressure tested to ensure safe and confident braking.
  • no extra stress on the brake boosting mounting.
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear.
  • Cast iron and aluminum specifications provide no extra stress on the brake boosting mounting.
Check Stock

ACDelco Professional 18M2539 Brake Master Cylinder Assembly

  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality.
  • Pressure tested to ensure safe and confident braking.
  • no extra stress on the brake boosting mounting.
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear.
  • Cast iron and aluminum specifications provide no extra stress on the brake boosting mounting.
Check Stock

ACDelco Professional 18M2643 Brake Master Cylinder Assembly

  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality.
  • Pressure tested to ensure safe and confident braking.
  • no extra stress on the brake boosting mounting.
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear.
  • Cast iron and aluminum specifications provide no extra stress on the brake boosting mounting.
Check Stock

ACDelco Professional 18M1878 Brake Master Cylinder Assembly

  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality.
  • Pressure tested to ensure safe and confident braking. Style: With Rectangular Reservoir Cap.
  • no extra stress on the brake boosting mounting.
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear.
  • Pressure tested to ensure safe and confident braking.
  • Cast iron and aluminum specifications provide no extra stress on the brake boosting mounting.
Check Stock

ACDelco Professional 18M2426 Brake Master Cylinder Assembly

  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality.
  • Pressure tested to ensure safe and confident braking.
  • no extra stress on the brake boosting mounting.
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear. Bore Diameter-0.937 inch. Primary Outlet Thread-0.50 inch. Secondary Outlet Thread-0.5 inch.
  • Cast iron and aluminum specifications provide no extra stress on the brake boosting mounting.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear.
Check Stock

A-Premium Disc Brake Caliper Assembly with Bracket Compatible with Toyota Sienna 2004-2010 Rear Left and Right 2-Pcs Set

  • 【Vehicle Fitment】Compatible with Toyota Sienna 2004-2006(3.3L), 2007-2010(3.5L)---with 4 Wheel Disc Brakes---(Rear Left and Right, Driver and Passenger Side).
  • 【Reference Number】4772228010, 4775028270, 47750-28270, 47722-28010, 19-B2873, 19B2873, 19-P2873, FRC11565C, 4772128020, 47721-28020, 4773028270, 47730-28270, 19-B2873, 19B2873, 19-P2873, FRC11565C.
  • 【Specification】Inlet Port Size: M10 x 1.0.
  • The Brake Calipers are coated with antirust coating, which can effectively prolong the service life..
  • 【Directly Fit】OE Replacement Brand New Brake Caliper Assembly, including Brake Caliper, Bracket, Steel Piston, Installation Hardwares. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time..
Check Stock

A-Premium Disc Brake Caliper Assembly Compatible with Chrysler Town Country Voyager Dodge Caravan Grand Caravan 2000-2007 Rear Left or Right Side

  • 【Vehicle Fitment】Compatible with Chrysler Town & Country / Voyager 2000-2007.
  • Dodge Caravan / Grand Caravan 2000-2007 (Rear Left or Right Wheel).
  • 【Specification】Brake Piston Count: 1 Piston.
  • The Brake Calipers are coated with antirust coating, which can effectively prolong the service life..
  • 【Directly Fit】OE Replacement Brand New Brake Caliper Assembly, including Brake Caliper, Phenolic Piston. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time..
  • 【Reference Number】5019808AA, 5003891AB, 18-4774.
Check Stock

A-Premium Disc Brake Caliper Assembly with Bracket Compatible with Jeep WJ Grand Cherokee 1999-2004 Rear Left and Right Side 2-PC Set

  • 【Vehicle Fitment】Compatible with Jeep WJ Grand Cherokee 1999-2004---(Rear Left and Right Side).
  • 【Reference Number】5011975AA, 18-B4818, 18-P4818, 18-4818, SLB1706, 5011974AA, 18-B4819, 18-P4819, 18-4819, SLB1707.
  • 【Specification】Brake Piston Count: 1 Pistons.
  • The Brake Calipers are coated with antirust coating, which can effectively prolong the service life.
  • 【Directly Fit】OE Replacement Brand New Brake Caliper Assembly, including Brake Caliper, Bracket, Phenolic Piston, Installation Hardwares. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time.
Check Stock

THOROAD Brake Caliper Press Tool, Brake Caliper Compression Tool,Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates (Red)

  • ...ion, also your hands will not get fatigued from the constant squeezing. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly..
  • 【 】THOROAD brake caliper compression tool ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.Suits for disc brake, NOT for drum brake..
  • 【】The brake caliper press is equipped with two groups of push plates,the size is 7.04x2.36 inches and 4.57x2.2 inches. The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03” please allow slight size difference due to the difference of manual measurement..
  • % ❤ ：THOROAD is a professional brand with many years of experience in the development of automotive repair tools, and we provide a full year warranty. Let you enjoy the p....
Check Stock

OMT Brake Caliper Wind Back Tool Kit, 24pc Brake Caliper Compression Tool Set with Thrust Bolt Assemblies Retaining Plates Caliper Hangers 18 Disc Adapters, Caliper Tool with Case, Black

  • ... blow molded case for easy storage and transportation.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle and rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt of this brake tool assembly easily hold your drive keys and adapters in place during use.
  • UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • see below for a full list of compatible models.
  • DURABLE BUILD: The sandblasted #45 carbon steel construction of our caliper piston tool ensures long lasting performance and corrosion resistance even after years of punishing use.
  • 1 YEAR WARRANTY: Service your brakes today with peace of mind thanks to our caliper piston compressor tool kit's strong 1 year warranty and Orion Motor Tech's usual friendly 24/7 customer service.
Check Stock