Reviews Boat Trailer Keel Roller

Attwood 11220-3 Roller Panel Spool/Keel Bracket Roller Assembly (11210 roller and 11252 bracket)

  • Reliably protects a boat’s keel as it rolls onto and off a trailer.
  • Complete assembly with Attwood 11210 roller and 11252 bracket.
  • Mounts to trailer cross roller assembly for smooth and protected boat loading and unloading.
  • Sturdy bracket is made of formed, zinc-plated steel panel.
  • Plate has a ½-inch-wide slot for adjustment.
Check Stock

Guns Mod for MCPE

  • Nice Protection for Boat Hull: the boat trailer keel pad can cling tightly to the keel of your boat, reduce the direct friction and scratches of the paint caused by trailer, rock, ramp and more.
  • Reliable Material for Lasting Service: the bow guard adopts quality 316 stainless steel and mirror polished, compact and sturdy in structure, no easy to break or rust, thus can serve you for a long time.
  • Convenient to Operate: just bend the bow guard in the middle to fit the shape of the keel, then peel off the protective film on the back of the adhesive bow guard, finally attach the guard to targeted position, press it for a few seconds, no other tools needed.
  • Kind Tips: it's recommended that you dry and wipe target position before you use the boat trailer keel pad, to get a better result.
  • The pad is not applicable to boat hulls that have multiple curves and many protrusions.
  • Appropriate Size to Use: the boat hull protector is approx. 22.86 x 22.23 cm/ 9 x 8.75 inches, suitable for most boats , able to bring you a pleasant using experience.
Check Stock

2 Pieces Stainless Steel Bow Guard Notched Bow Guard for Protection Boat, 9'' x 8.75''

  • Nice Protection for Boat Hull: the boat trailer keel pad can cling tightly to the keel of your boat, reduce the direct friction and scratches of the paint caused by trailer, rock, ramp and more.
  • Reliable Material for Lasting Service: the bow guard adopts quality 316 stainless steel and mirror polished, compact and sturdy in structure, no easy to break or rust, thus can serve you for a long time.
  • Convenient to Operate: just bend the bow guard in the middle to fit the shape of the keel, then peel off the protective film on the back of the adhesive bow guard, finally attach the guard to targeted position, press it for a few seconds, no other tools needed.
  • Kind Tips: it's recommended that you dry and wipe target position before you use the boat trailer keel pad, to get a better result.
  • The pad is not applicable to boat hulls that have multiple curves and many protrusions.
  • Appropriate Size to Use: the boat hull protector is approx. 22.86 x 22.23 cm/ 9 x 8.75 inches, suitable for most boats , able to bring you a pleasant using experience.
Check Stock

Festnight Boat Trailer Bottom Support Bracket with Keel Rollers for Boats from 2' 7\ 4' Wide

  • Can be installed on a boat trailer to support the bottom part of the boat, which makes it indispensable for your trailer and vessel..
  • The width of our bottom support bracket can be adjusted, it is perfect for boats from 2’ 7” – 4’ wide, which suits both big and small vessels..
  • Constructed of high quality zinc-coated steel, this bottom support bracket will offer you a long-term service life..
Check Stock

Attwood 11210-1 Boat Trailer Rubber Keel Roller Black 4 inches

  • Helps center and guide the keel of your boat on to the trailer for level and safe trailering.
  • Efficiently helps roll your boat to the trailer bow stop.
  • Helps your boat from shifting side to side on the trailer.
  • Made from natural rubber to buffer and protect your boat.
  • 5/8" diameter mounting hole for easy installation.
Check Stock

UANOFCN 3 Boat Trailer Roller Assembly 1/2 Shaft Non Marking Polyurethane

  • This boat trailer roller protects your boat bow with solid polyurethane and makes launching your boat easily.
  • This boat trailer roller is 5 inch long and 3 inch in middle and with 1/2 inch hole.
  • This assembly includes 3 inch bow roller, 2 Bells, and a stainless steel 1/2 inch diameter bolt to mount the assembly.
  • Will not rust or mark your boat, and neither flat spot.
  • Our product compatibility and reliability, design and construction, never fail attitude.
Check Stock

Attwood 11317-1 Boat Trailer Spool/Keel Polymer Roller, 5 Inches

  • Smooth, non-marring, resilient protection for the keel of your boat.
  • Efficiently eases loading and launching your boat while helping to center your boat on the trailer.
  • Durable, protective rollers are for heavy-duty use.
  • Long lasting polymer construction makes it impervious to sunlight, chemicals and fuels.
Check Stock

osemar Boat Trailer Side Guides Roller Guide On System

  • Make loading your boat easier in bad weather: Use these roller guides to keep your boat centered during loading despite wind and waves, making it easier to load your boat..
  • Easy and fast installation: Trailer guides can be mounted on top or under the frame, and combination of long bolts and base plate can fit frames of different volumes..
  • Say goodbye to rust and breakage worries: Galvanized steel coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding..
  • Don't worry about your boat getting hurt: Black rubber rollers with end caps protect your boat's surface..
  • Adjustable Width: 97° arms and 13" roller assembly.
  • up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment, 6" bolt kits are available for trailer frames up to 5" tall..
Check Stock

2 Pcs Boat Keel Guard Black Boat Hull Guard Keel Guard for Fiberglass Boat Rubber Boat Keel Protection with 2 Small Yellow Spade, 6 Feet (Glue Not Included)

  • Easy to Install: our boat keel guard can easily be installed, you can clean the boat keel part first, and then apply glues (not included) to the surface, after a few minutes, use the equipped spade to press the keel guard to make it stick tightly.
  • Trustworthy and Serviceable: our boat hull protector is mainly made of quality rubber, soft and solid, can keep your boat away from heavy crashes and scratches, not easy to tear or deform, which can serve you for a long time.
  • Suitable Size for Application: each of our black keel protector measures 182.88 x 12.7 x 1 cm/ 72 x 5 x 0.39 inches, approx. 6 feet in length, the size design makes it available for a boat that measures 18 feet.
  • Package Include: you will receive 2 pieces of black keel guards with 2 pieces of small yellow spades in different shape, the proper quantity can meet your replacement needs for boat keel protection, and you can use them for different boats and yacht.
  • Wide Range of Use: you can use our boat keel protection to keep guard of the keels or hulls of your boat, yacht or houseboat, which can make your boat safe ....
Check Stock

Seachoice Bow Roller w/Bells, 4 in. TPR, Gold

  • Replaces the bow roller, end bells, shaft, and hardware on your boat trailer.
  • Designed to support the weight of your boat on the trailer.
  • End bells ensure that the boat does not scrape against bolts or roller bracket.
  • TPR (Thermal Plasticized Rubber) is resilient, non-marking.
  • stronger than black rubber and softer than polyurethane.
Check Stock

Seachoice Bow Roller w/Bells, 3 in, TPR, Gold

  • Replaces the bow roller, end bells, shaft, and hardware on your boat trailer.
  • Designed to support the weight of your boat on the trailer.
  • End bells ensure that the boat does not scrape against bolts or roller bracket.
  • TPR (Thermal Plasticized Rubber) is resilient, non-marking.
  • stronger than black rubber and softer than polyurethane.
Check Stock

Extreme Max 3005.3825 Side Mount Roller Guide-On System

  • Includes a pair of boat trailer roller guide-ons for close applications (boat must be at least 3" narrower than trailer frame).
  • Zinc-coated for freshwater use, not intended for use in saltwater or brackish water.
  • Fits bunk or roller-style trailer frames up to 3" wide x 4.5" tall.
Check Stock

COLOFULWAY 8 inches Self Centering Boat Trailer Keel Roller (Blue)

  • Includes one pair of Heavy-Duty Roller Guide-Ons with an easy, bolt-on installation that fits bunk or roller-style trailer frames up to 3" wide x 4. 25" tall.
  • Custom-formed 97° arms and 13" roller assembly.
  • up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment.
  • Zinc-coated for freshwater corrosion-resistance, not intended for use in saltwater or brackish water.
  • The size and shape of trailer frames can vary drastically, please measure your boat on the trailer before ordering to ensure a proper fit.
  • 6" bolt kits are available for trailer frames up to 5" tall.
Check Stock