Reviews Blastfurnace Slag

CHOWEL BHS-W330 Welding Chipping Hammer Slag Removal Tool with Forged Construction Shock Reduction Grip & lightweight 13oz

  • High-Quality Slag Remover Chipping / Welding Hammer.
  • Perfect for cleaning and removing slag from all welds.
  • Rubber grip for durable, reduce impact and prevention for slip out from the hand.
  • It's designed as Slag and Chipping hammer for welding. Please do not use this chipping hammer as a chopping Axe or Sledge Hammer..
Check Stock

Walter Surface Technologies 53F605 E-Weld Plasma Protection Liquid (10 Kg) - Ceramic Fluid for Plasma Cutting Tables. Anti-Spatter Solution

  • Anti-Spatter Liquid: ceramic anti-spatter solution can be safely applied to cutting tables to reduce the buildup of slag over time. It also decreases the amount of time and effort required in cleaning the slag off the tables.
  • Functions: prevent the creation of uneven cutting surfaces with this plasma solution. It also helps in increasing the lifespan of the equipment it is applied on.
  • Efficiency: it serves as a preventive measure in keeping the slag from adhering to slats of cutting tables. This protective solution decreases the time, efforts, and costs required in equipment maintenance and helps generating revenues.
  • Usage: use anti-spatter liquid with easy-to-use E-weld arm-mounted sprayer that applies a thin layer over the surface to prevent any wastage. The anti-spatter liquid is available in a 10 kg container, which is enough to cover 50-100 square meters.
Check Stock

PROSHI Compact air needle scaler remove slag rust paint and dirt quickly with this needle scaler

  • Air pneumatic needle slag cleaner deburring tool removing tool rust corrosion slag remove cleaning Tool..
  • 12 hardened 3mm steel needles remove weld slag, rust, paint, and dirt. working trip: 6-7mm, blows per minute: 4000bpm.
  • One-trigger-operation eliminates complicated preparing steps and is easy to use. Meanwhile, a professional touch trigger not only adds comfort but....
  • With its compact size and excellent performance, this lightweight needle rust remover is designed to clean smaller surfaces without messy abrasive....
  • Needle scaler easy adjustment without special tools. What's more, it features an exhaust design that keeps the human body away from dust, and....
Check Stock

Rustark 3 Pack Scratch Wire Brush Slag Removal Tool Kit With Welding Leather Gloves, 10 Inch Welding Chipping Hammer and Wirebrush, Welding Slag Removal Tool for Cleaning Removing Slag

  • 【What you Get】The welding slag remover set contains 1 pcs welding slag hammer, 1 pcs welding slag brush, 1 pairs welding gloves, totally 3 pcs. Full and convenient welding slay removal tool for you, saving your energy to looking for extra tool. In addition, offer reliable after-sale service.
  • Pls feel free contact us for any dissatisfaction. We will reply you within 12 hours for your satisfaction..
  • 【Welding Chipping Hammer】Made of durable high strength steel with multi-layer black powder coated for rust-resistance. Dual-head design with flat chisel on one end and point chisel on the other end, allowing it easier to use in tight and small space.The spring handle is designed to reduce the impact forces of contact. Coil Spring handle design for absorbing the shock of contact while cleaning and shipping way welding debris..
  • 【Steel Wire Scratch Brush】Made of solid stainless steel, wooden handle with pre-drilled hole for hanging, sturdy and durable, long service time. 252 mm in totally length, proper size for easier grip. Ideal for aggressive cleaning and removing rust and paint from most surfaces..
  • 【Protective Welding Gloves】 Made from thick and soft shoulder split natural cowhide leather with heat resistance,wear-resistance,puncture resista....
Check Stock

Welding hammer/Slag hammer/Chipping hammer/welder hammer economic chisels, forged steel structures and shock-absorbing handles

  • 【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. Practical slag removal tool we offer..
  • 【ALL IN ONE PACK】You are going to receive 1 piece of welding hammer and 1 piece of wire brush and this pack comes with protective gloves, please wear this before operation! These tools will surely help a lot for your welding job. Easy to remove and clean corrosion and slag and rust, saving time and energy during your work, very easy to use, long-lasting and quick cleaning.
  • 【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use..
  • 【WELDING CHIPPING HAMMER】Professional welding tool! Shockproof tool! Made of carbon steel, heat treatment, high hardness and toughness, it....
Check Stock

Welding 10 OZ hammer/Slag/Chipping/welder hammer economic chisel, forged steel structures and shock-absorbing handles. Rock hard. Non rotary. Flat and spike sides.

  • The Welding Hammer: Spring handle welding chisel hammer skimmer. Used for removing slag and welding residue..
  • The Spring Welding Design: Spring handle is designed to absorb the shock of contact while cleaning and shipping way welding debris..
  • The Practical Design: One end is a flat chisel and the other end is a conical chisel to get into tight spots..
  • Spiral barrel spring type handles with springy shock-proof design at the end with hook handle.
  • It can be used to remove metal slag, remove weld slag from welds and weld spatter, and beat hard objects, etc..
Check Stock

YESWELDER Flux Core Mig Wire, Mild Steel E71TGS.035-Diameter, 10-Pound Spool

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
Check Stock

Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag

  • ☛ 1, What You Get ------ In this kit, You will get 4Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 pair Welding Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb t....
Check Stock

Vaper 41225 Chipping Hammer

  • ✔️What You Get? --- In this welding slag removing tools kit, there is 1 piece 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Size Detail --- Welding Chipping Hammer: 255 × 125 × 20mm/10 × 5 × 0.78 inch (Handle length × Cone part length × Cone part width).
  • Wire Brush: 252 × 120mm/9.9 × 4.7 inch (Total length × Brush length).
  • Welding Gloves: 415mm/16.3 inch (Length)..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole on the end of handle, which is convenient for storage while not use it..
  • ✔️ Welding Chipping Hammer --- This professional welding hammer is forged with premium high carbon steel overal heat treatment, with high hardness, strength and toughness. Designed with a steel coil spring h....
Check Stock

Keadic Professional Welding Slag Removal Tools Kit, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Welding Plier, Wire Brush & Welding Gloves Heat/Fire Resistant

  • ✔️ Complete Welding Slag Removal Tools Kit --- In our multi-function welding tools set, we prepared 3 practical welding slag removing tools for you, including 1 8 Inch Anti-Rust Welding Plier, 1 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Anti-Rust Welding Plier --- The pliers body is forged with high quality carbon steel, sturdy and durable, not easy to rust/deform/break.The precise tooth pattern provide it strong clamping force, no-slip. After special heat treatment, the jaws are very sharper and firmer, which improves its service life. Further more, its ergonomic rubber covered handle bring you comfortable touch, suitable for long time operation..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole ....
Check Stock

Swpeet 5Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves, 8 Inch Welding Plier and 10 Inch Welding Chipping Hammer with Steel Coil Spring Handle

  • ☛ 1, What You Get ------ In this kit, You will get 5Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 piece welding plier, In total 5Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the s....
Check Stock

INETUB BA71TGS .030-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feed-ability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.
Check Stock

44 lb Roll ER70S-6 0.035\ - 0.045\ Mild Steel Mig Welding Wire (0.035\ X 44#)

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.
Check Stock