Reviews Bent Axial Pump- BestItemr.com

KOLERFLO 110V Water Recirculation Pump 120W Automatic Circulation Pump/Circulator Pump for Water Heater System(RS15-9 Red)

Max flow：30L/min；Rated Head：25.9FT.
Liquid Temperature range -10 – +110℃；Voltage: 110V/120V, Frequency:60Hz.
Inlet/Outlet: 3/4 inch.And there’s no other fittings only pump included for this package..
120W Powerful motor, the Most powerful Type of this boost pump. It Can be used with water heater or hot water pressurization system,but not for potable water system..
The built in flow switch will Automatically turns the booster pump off and on.you can also use it with a pressure switch..
No leakage, low noise, environmental protection, aesthetics, ease of installation and so on..
Compact and Durable: Pump housing: Cast Iron.
Impeller: Corrosion-resistant, Composite, PES.

Great practicability: Piston pump can self-prime and can output relatively large pressure.
Made of high quality electronic components, stable and reliable performance..
Improved configuration: The pump head is equipped with a check valve, which can control the fluid quality, reduce leakage and improve the working efficiency of the pump..
Advanced coupling structure: Adopting the coupling structure to reduce the radial and axial pressure of the motor, the motor runs more smoothly..
Live up to expectations: This water pump has sealed switch and coating to prevent corrosion, the body is sealed, to prevent incidental moisture and dust from entering. More resistant to corrosion and high temperatures, more durable..
Pump working mode: Single cylinder piston.
Inlet and outlet: 6MM outer diameter (6x9MM silicone tube is recommended).

Kit Includes everything needed to do a full conversion: These Stainless Steel Screw Kits are 100 percent complete.
NO MORE BENT or rusted or corroded screws: These are Stainless Steel Screw Kits.
Stainless Steel Screw Kits are far superior to the screws that come stock with your RC.
For Screw Installation and Notes - see product description.
axi024 - Genuine RCScrewZ Kit - for Axial Kit AX90055 - 310+ pieces.

1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation..
2.Max Working Pressure: 10bar(145PSI).Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉.
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on..
4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water..
5.Materials: Pump housing: Stainless Steel.
Impeller: Corrosion-resistant, Composite, PES.
Bearing: Carbon axial. › See more product details.

Maintenance-free OEM Technologies vertical axial cam pump.
Welded, powdered-coated steel frame for corrosion resistance and 12” never-flat wheels for portability.
Ergonomic spray gun designed for comfort and control with adjustable pressure regulator and M22 connectors.
0 °, 15 °, 40 °, soap and Turbo nozzle that creates a powerful jet of oscilating water.
25′ MorFlex poly-braided abrasion resistant high pressure hose.
Warranty Details: ENGINE – 2 Year Limited Consumer Warranty | PUMP – 1 Year Limited Warranty | FRAME – 5 Year Limited Consumer Warranty.

Powerful DuroMax 7 HP Engine with Low Oil Shutdown. Oil Capacity-0.6L. Fuel Tank Size-0.79 Gallons. Thermal Relief Valve-140º Farenheit.
Quick Change Connectors make installing the hose a snap, 6 Quick Connect Nozzles includes: 0, 15, 25 and 40 degree, soap applicator and Turbo Nozzle.
Convenient on-board storage for spray gun, high pressure hose and nozzles.
Pressure Output: 3100 PSI Gallons Per Minute: 2.5, 3-Piston Axial Cam Brass Head Pump.
Durable welded frame protects the engine and pump, making it easy to lift, Cushion grip and easy to pull trigger reduce fatigue and improve comfort.

[3900 PSI 2.4 GPM] for delivering excellent cleaning results. Maintenance-free OEM Technologies axial cam pump. 2 year warranty protects your investment.
[Foam Cannon] Produces dense foam and stays on the surface longer for resulting in better cleaning performance. Can use various detergents and chemcials because they don't go through the pump to infect the pump's life.
[Adjustable Pressure] 4 nozzles(0º, 15º, 25º, 40º) provide pressure from high to low for cleaning surfaces from hard to soft..
[General High Pressure Hose Connector] M22-14 Female thread on both sides of the hose which is univesal in US. So that it is convenient for you to replace the hose, adding an extansion hose, changing spray gun and connect to a surface cleaner..
[Large Cleaning Range] 26 ft high pressure hose, 35ft 120V 3 prongs power cord for washing everywhere of your home..

Upgraded 2022 model with new axial load design provided additional pressure and GPM..
Sturdy stainless steel casing to ensure prolonged lifespan..
2-wire, direct start model - no control box required..

[3900 PSI 2.4 GPM] for delivering excellent cleaning results. Maintenance-free OEM Technologies axial cam pump. 2 year warranty protects your investment.
[Foam Cannon] Produces dense foam and stays on the surface longer for resulting in better cleaning performance. Can use various detergents and chemcials because they don't go through the pump to infect the pump's life.
[Adjustable Pressure] 4 nozzles(0º, 15º, 25º, 40º) provide pressure from high to low for cleaning surfaces from hard to soft..
[General High Pressure Hose Connector] M22-14 Female thread on both sides of the hose which is univesal in US. So that it is convenient for you to replace the hose, adding an extansion hose, changing spray gun and connect to a surface cleaner..
[Kink Resistant] Our premium high pressure hose using high quality material and unique high-tech manufacturing process to make the hose soft and kink resistant, easy to carry, drag and roll up..

1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation..
2.Max Pressure 11bar.Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉.
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on..
4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water..
Impeller: Corrosion-resistant, Composite, PES.