Reviews Hydraulic Axial Piston Pump

TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved

  • Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
  • Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
  • Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
  • Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
  • Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stock

Walfront 12V 0.9A Water Pump Mini Self Priming Single Cylinder Piston Pump with 10 Meters Lift Portable Low Noise, Various Pumps And Accessories

  • Great practicability: Piston pump can self-prime and can output relatively large pressure.
  • Made of high quality electronic components, stable and reliable performance..
  • Improved configuration: The pump head is equipped with a check valve, which can control the fluid quality, reduce leakage and improve the working efficiency of the pump..
  • Advanced coupling structure: Adopting the coupling structure to reduce the radial and axial pressure of the motor, the motor runs more smoothly..
  • Live up to expectations: This water pump has sealed switch and coating to prevent corrosion, the body is sealed, to prevent incidental moisture and dust from entering. More resistant to corrosion and high temperatures, more durable..
  • Pump working mode: Single cylinder piston.
  • Inlet and outlet: 6MM outer diameter (6x9MM silicone tube is recommended).
Check Stock

OTC 1834 25-Ton Capacity Shop Press with Air-Driven Hydraulic Pump

  • OTC's tough, economical, 25-ton capacity press features heavy steel construction with a durable powder coat finish and is ideal for pressing rear axle bearings, piston pins, and much more.
  • Large 30 inch x 46 inch work area under ram makes positioning of even bulky work easy.
  • Pneumatically driven hydraulic pump with simple foot operation keeps both hands free.
  • press bed is raised or lowered with a hand crank, allowing one-person set-up and operation.
  • Complete with No. 4020 Air-Driven Hydraulic Pump, No. 9652 Gauge, No. 24815 Tee, No. 9768 Hose, No. 51426 Hydraulic Ram with 6-1/4 inch stroke.
  • Unit stands 69-1/2 inches tall, 40-1/2 inches wide, and 28 inches deep.
  • frame extension holes are on 4 inch centers.
  • backed by OTC's Lifetime Marathon Warranty.
Check Stock

Fudoray Airless Spray Pump 248204 248-204 for Airless Paint Sprayer 695 795 Ultra Max II Gmax 3900

  • Replaces: 248204 248-204 Airless Spray Pump.
  • Airless Spray Pump For Ultra Max II GMax 3900.
  • Performance tested on every single unit with hydraulic oil.
  • Includes Stainless Steel Rod & Packings. A more cost effective model than the Endurance pump.
Check Stock

BarberPub Vintage Barber Chair Heavy Duty Metal Frame All Purpose Hydraulic Recline Salon Beauty Spa Equipment 2947 (Red)

  • 【Vintage Barber Chair】Easy clean bi-cast leather and high density memory foam.
  • 【Durable Structure】Steel frame construction.
  • 【Swiveling Recliner Chair】360 degrees swivel with locking mechanism provides versatility,135 degree reclining with gas-piston lock & release mechanism.
  • 【Flexible Adjustment】Adjustable head rests and 6.3" of height adjustment via a heavy duty hydraulic pump ensure comfort for a wide variety of client heights.
  • 【Easy Assembly Required】The frame and seat comes PRE-BUILT. The backrest can recline and it is the only thing you will need to assemble..
Check Stock

BarberPub Vintage Barber Chair Heavy Duty Metal Frame All Purpose Hydraulic Recline Salon Beauty Spa Equipment 2947 (Black with Grey Frame)

  • 【Vintage Barber Chair】Easy clean bi-cast leather and high density memory foam.
  • 【Durable Structure】Steel frame construction.
  • 【Swiveling Recliner Chair】360 degrees swivel with locking mechanism provides versatility,135 degree reclining with gas-piston lock & release mechanism.
  • 【Flexible Adjustment】Adjustable head rests and 6.3" of height adjustment via a heavy duty hydraulic pump ensure comfort for a wide variety of client heights.
  • 【Easy Assembly Required】The frame and seat comes PRE-BUILT. The backrest can recline and it is the only thing you will need to assemble..
Check Stock

Anti-Rotation Bracket 0

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Electric 50 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

  • Cylinder Max Pressure 25MPA,TONNAGE: 502 KN.
  • Worktable Size: 13-1/2" x 30-1/2" x 1-1/8".
  • Overall dimension: 50" x 20" x 66-1/2" (crate: 59" x26" x 78") *estimate only*.
  • Weight G.W. / N.W. : 1,529 lbs / 1,372 lbs *estimate only*.
Check Stock

Duromax XP3100PWT 2.5 GPM Gas Powered Cold Water Power Pressure Washer, 3100 PSI

  • Powerful DuroMax 7 HP Engine with Low Oil Shutdown. Oil Capacity-0.6L. Fuel Tank Size-0.79 Gallons. Thermal Relief Valve-140º Farenheit.
  • Quick Change Connectors make installing the hose a snap, 6 Quick Connect Nozzles includes: 0, 15, 25 and 40 degree, soap applicator and Turbo Nozzle.
  • Convenient on-board storage for spray gun, high pressure hose and nozzles.
  • Pressure Output: 3100 PSI Gallons Per Minute: 2.5, 3-Piston Axial Cam Brass Head Pump.
  • Durable welded frame protects the engine and pump, making it easy to lift, Cushion grip and easy to pull trigger reduce fatigue and improve comfort.
Check Stock

Longray SP4A Stainless Steel Sprayer, 1 Gallon, Metallic

  • 【All Stainless Steel Structure】- the pump, box, cover, rod, pump handle and rod handle are all made of durable stainless steel. Braided durable hose， not cheap plastic - with Viton seals and gaskets.
  • 【HAND-PUMPED SPRAYER】- This sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.adjustable spray is perfect for misting.
  • 【WIDE-MOUTH WATER INLET】- This sprayer boasts valve and pressure gauge that can provide convenience and ensure safety.Large Wide Mouth opening allows for easy filling and cleaning and less spilling..
  • 【FOR MULTI-PURPOSE】- Built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture, commerce and medicine.
  • [Note]-We provide 1 gallon 1.5 gallon 2.5 gallon 3 gallon 3.5 gallon stainless steel sprayer, blue film, the film is scratch-resistant and does not need to be torn.
  • the liquid is on the piston rod, only hydraulic spraying is required.
Check Stock

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

BESTOOL Pro Series OTR Giant Hydraulic Tire Bead Breaker for 5 Piece Rims 25 in. to 51 in. with Pry Bar Bead Loosening Pockets, 10000PSI

  • 【PREMIUM QUALITY】 This bead breaker is built with the cast iron material combined with precision machining components, sturdy and durable.
  • the high-quality baking finish makes it rust-proof. It can break beads smoothly with the max pressure of 10,000 psi (700 bar).(NOTE : Without Air Hydraulic Pump!!!).
  • 【LARGE WORKING RANGE】 The working range of this tire bead breaker is up to 5" (12.7 cm), which can save the trouble of changing the hook when dealing with tires of general sizes. The more extended feet and claw grasp the tire firmly to avoid slipping off, labor-saving and time-saving..
  • 【CHROMIUM-PLATING PISTON ROD】 This hydraulic bead breaker comes with a piston rod designed with fine polishing and chromium-plating processing, which has good abrasiveness and anti-causticity. The superior quality high-pressure joint can be easily tightened by hand..
  • 【SELF-RETRACTING DESIGN】 The hydro-cylinder of this hydraulic breaker is equipped with a powerful spring and adopts the technology of self-retracting under the force of the spring, which dramatically simplifies the operation steps and improves the working efficiency..
  • 【WIDE APPLICATION】 This bead buster is widely used in the repair and replacement of tires for engineering vehicles, agricultu....
Check Stock

Bonvoisin 10T Hydraulic Cylinder Jack Porta Power Mini Hydraulic Ram Multi-Acting Low Profile Lifting Cylinders for Machinery Shipbuilding (Cannot Retract Automatically)

  • [Ultra-thin & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Note] - After the pressure is relieved, the piston of the jack ram CANNOT retract by itself! You must use gravity to press the jack to retract, which is not a quality problem..
  • [Used with Pumps] - The porta power should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock