Reviews Battery Maintenance Equipment

QTEATAK 2pcs 9v Battery Holder with Switch and Lead Wires

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is very convenient to install and replace the battery, and it is not easy to damage other parts..
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

ExpertPower 12Volt 55AH Rechargeable Gel Battery

  • 12V 55AH/20HR is Gel Deep Cycle Sealed Battery.
  • Size: 8.97(L)*5.39(W)*8.3(H) inch 37 lbs With 1 Year Warranty..
  • GEL Deep Cycle battery offers excellent recovery after deep discharge under frequent cyclic discharge use, longer cycle life..
  • True deep cycle battery that can be mounted in any position, Resists shocks and vibration. Long lasting high performance in high and low temperatures..
  • Factory activated GEL battery. Maintenance free. No acid pack needed. Advanced design works right out of the box and requires no maintenance yet offers the option to prolong the standard life by adding extra electrolytes..
  • Used For Solar Panel Power Bank System, Solar VRLA 12V 24V 48V Off-grid Applications, Trolling Motor, Mobility Scooter Wheelchair, Electronics, Wheelchair, Scooter, Industrial and Medical Equipment, Golf Carts, Hunting, Lawn and Garden Tools, Portable Tools, Toys and Hobby, Emergency Lighting, Leisure, RV House, Security and more..
Check Stock

4 x 1.5V AA Batteries Battery Holder Wire Leads

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to....
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4. Battery Type: 6×4 AA batteries,Wire Length: 5.2"/13cm.
  • Cable Color: red and black.Case Dimensions:....
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

2Set 8 x AA Thicken Battery Holder with I Type Wired Battery Clip Standard Snap Connector

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with an I-type wire..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to damage other parts..
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio, quartz clock, wireless keyboard, electronic calculators, doorbell, mobile digital recorder, remote control, radio, quartz clock, electronic calculators, doorbell, tape machine, electric toys, children/adults wireless mouse/keyboard, strong light flashlight, electric shavers, camera flash, electric toothbrush, game handle, strong light flashlight at l.
  • 5.Item Name：Battery Case ；Material : Plastic, Metal；Battery Type : 8 x AA 12V.
Check Stock

QTEATAK 6 Pcs 2 x 3V CR2032 Button Coin Cell Battery Holder with Leads On Off Switch

  • 1. Suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery holder is snap-in design, no screws are needed.
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • Cable Length: approx. 15cm/5.9 inch.Fit Battery Model: 3V CR2032.....
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

4Set 4 x AA Thicken Battery Holder with I Type Wired Battery Clip Standard Snap Connector

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to....
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4.DIY: Can get the voltage 6V, 12V,18V,24V dc power supply..
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

QTEATAK 5Pcs 2X 1.5V AA Battery Holder Case with On/Off Switch and Wire Leads

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to damage other parts..
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4. Battery Type: 2 AA batteries, 2x 1.5V AA batteries. ON/OFF switch.Wire Length: 5.2"/13cm.
  • Cable Color: red and black.Case Dimensions: 68*33*18mm/2.68*1.3*0.71inch(L*W*H). One Screw Weight: 0.564oz/16g. Includes 5 mounting screwss.
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio, quartz clock, wireless keyboard, electronic calculators, doorbell, mobile digital recorder, remote control, radio, quartz clock, electronic calculators, doorbell, tape machine, electric toys, children/adults wireless mouse/keyboard, strong light flashlight, electric shavers, camera flash, electric toothbrush, game handle, strong light flashligh.
Check Stock

Schumacher SE-1-12S 1.5A 6/12V Fully Automatic Battery Maintainer

  • Specially designed for vehicles in storage and cold weather battery maintenance for motorcycle, power sport, and car batteries.
  • Microprocessor controlled to automatically adjust the amperage rate to charge and maintain.
  • Multi-stage charging for added precision, safety, and battery life.
  • Features float-mode monitoring, reverse hook-up protection, and auto-voltage detection.
  • Rugged molded plastic case resists gasoline, oil, water, solvents, and acid.
  • Can install next to the battery on automobiles, boats, tractors, golf carts, and other equipment.
Check Stock

4PK 12V 10AH Replacement for Currie eZip Trailz Electric Bike Battery

  • 12V 10AH 12 Volt 10 Amp Hour Sealed Lead Acid Battery with F2 Terminal (.025" Spade).
  • Dimensions: 5.94" x 2.57" x 4.12" Weight: 7 lbs..
  • Sealed and maintenance free operation, non-spillable construction design with safety valve for explosion prevention..
  • Emergency Lighting, UPS Systems, Underwater Fish Finders/Cameras, Fire & Security Alarm, Game Feeder’s, Game Decoy’s, Radio Control, Robotic, Invisible Pet Fences, Communications, Telemeters, Camera’s & Photographic Equipment, Hobby Equipment, Small Toys, Street Lighting, Pumps, Solar Power.
  • Replaces 12V 10AH and 9AH (Check Height) SLA Batteries.
Check Stock

ciciglow Battery Activation Card, Cell Phone Battery Activation Card with LED Display, Fast Charging Phone Battery Repair Kit, for Android for iPhone 4G 4S 5G 5S 5C 5SE X XR XS XS Max 11 11Pro 11Pro

  • Applicable Models: Support for iPhone 4G 4S 5G 5S 5C 5SE 6G 6P 6S 6SP 7G 7P 8G 8P X XR XS XS Max 11 11Pro 11Pro Max 12 12Pro 12Pro Max 12 Mini 13 13Mini 13Pro 13Pro Max smartphones and for Android smartphones..
  • Fast Charging: Advanced design, safe, fast charging, accurate short circuit, and judgment ability, prevent all kinds of bad batteries for you, saving your time greatly..
  • Simple Operation Method: Activate to wake up sleeping battery, press activate button to activate battery and use again. Convenient and practical..
  • LED Display: Support LED digital display, voltage display and current display to avoid long term use of power equipment to affect maintenance work..
  • Applications: This professional battery tester is great for battery activation and charge maintenance. Easy to use, fix the connection and get started..
Check Stock

NP12-7Ah F2 12V 7Ah AGM Rechargeable Maintenance Free Valve Regulated Sealed Lead Acid Battery with F2 Terminal

  • CERTIFICATION - ISO9001, ISO14001, CE, and UL Certified.
  • BATTERY TYPE - 12V 7 Amp NP12 7Ah UPS Rechargeable Sealed Lead Acid Battery F2 Terminals.
  • APPLICATION - Alarm System, Emergency Lighting System, Firefighting Equipment, Standby Power Supply and Telephone Switching System, Uninterrupted Power Supply, Telecommunication System, Computer Standby Power Supply System, Etc..
  • RUGGED DESIGN - The battery case is made from a Non-Conductive ABS plastic, Strong Resistance to Shock, Vibration, Chemicals, Weather and Heat. Very easy to install and requires no maintenance..
  • WARRANTY - At NPP, each battery has been strictly quality controlled. Each NPP battery will come with an one year warranty. So you can purchase with confident..
Check Stock

3 Pack 12V 12AH F2 Battery Replaces Razor MX500 Dirt Rocket Model #15128190

  • 12V 12AH 12 Volt 12 Amp Hour Sealed Lead Acid Battery with F2 Terminal (.250" Spade).
  • Dimensions: 5.94" x 3.86" x 3.94" Weight: 8.9 lbs..
  • Sealed and maintenance free operation, non-spillable construction design with safety valve for explosion prevention..
  • Emergency Lighting, UPS Systems, Underwater Fish Finders/Cameras, Fire & Security Alarm, Game Feeder’s, Game Decoy’s, Radio Control, Robotic, Invisible Pet Fences, Communications, Telemeters, Camera’s & Photographic Equipment, Hobby Equipment, Small Toys, Street Lighting, Pumps, Solar Power.
  • Replaces 12V 12AH 10AH and 11AH SLA Batteries.
Check Stock

QTEATAK 8 Pack 18650 Battery Holder Bundle with Wire 1 18650 Battery Holder 3.7V 2 Pcs 2 Battery Holder 7.4V 2 Pcs 3 Battery Holder 11.1V 2 Pcs 4 Battery Holder 14.8V 2 Pcs

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to....
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4.DIY: can be assembled by different size of battery box, can get the voltage 3.7V, 7.4V, 11.1V, 14.8V dc power supply..
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock