Reviews Automotive Strut Mount Tool

Genuine GM 9597801 Hub Cap

  • Genuine Oem: Yes, Manufacturer Part Number: 9597801, Category 3: Covers & Trim, Part Ref# On Diagram: ONLY PART REFERENCE #1 ON THE DIAGRAM IS.
  • Warranty: 1 Year, Category 2: Wheels, Alternate Item Name: Suspension Strut Mount Tool, Quantity Needed: 1.
  • Brand: GM, Fitment Type: Direct Replacement, Item Name: Suspension Strut Mount Tool, Category 1: Front Suspension.
Check Stock

8MILELAKE Macpherson Strut Spring Compressor

  • This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring.
  • For repairs on bent struts, strut tubes, and damaged pieces.
  • Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut.
  • threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
  • it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
  • The 8MILELAKE Macpherson Strut Spring Compressor constructed with forged hooks and center screw hardened for maximum strength and longevity.
  • A plastic carry case is included. easy to organize and carry the tool.
Check Stock

Suspension Strut Spreader Socket Tool Strut Knuckles Remover Shock Absorber Ram Dismantle Socket Compatible with Audi VW, compatible with Ford, compatible with BMW, compatible with Citroen (Pack of 2)

  • Must Have Tool for Remove Strut : It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks. and very easy to knock it out of the spread position, makes removal suspension strut much easier.
  • Easy To Use: With this spreader, it slides easily into place and effortlessly holds the knuckle apart so you can remove the old strut and pop the new one right in immediately without any struggle. use 1/2" ratchet connect spreader socket.
  • Not Damage Axle: No need to ever again sledge hammer away at the knuckle if you have this tool, eliminating any potential damage to the steering knuckle.
  • Fit Many Automotive: Include 5*8mm, 4.5*6.5mm different size two spreader socket , so this kit fit many car, fit VW Golf IV, compatible with Audi, compatible with Ford, compatible with BMW, compatible with Citroen, compatible with SKODA, Seat, Renault, Peugeot etc.
  • Durable: This suspension strut spreader socket made of high quality steel, high hardness and very strong, and we offer lifetime warranty, we will replace or refund, if our suspension strut socket have any quality problem.
Check Stock

Motormite 21148 Drum Brake Bar

  • Direct replacement - this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution - this strut is a reliable replacement for an original part that is missing or damaged.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

SCITOO 2Pcs Macpherson Strut Spring Compressor Tool 11.5\ fit for 13/16\ Socket 1/2\ Drive

  • ...table for both professional mechanic and beginner use..
  • 【LOCKED FIRMLY】 The SCITOO threaded rod has a wide spring contact surface and a built-in positioning pin, which can lock the coil spring in place to ensure safer compression of the spring..
  • 【1 YEAR WARRANTY】 We provide 1 year warranty for you. When doing automotive maintenance always make sure all the tools are correctly used and wear glasses and gloves . Any question or problem, feel free to contact us..
Check Stock

KIPA Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tool for Truck Car RV Tire Repair New Top Strong Magnetic Absorb Ingenious Design Practical Circular end Mounting

  • This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check....
  • Top Quality: KIPA Wheel Alignment tool is made of solid Alloy, Well-CNC machined, Accurate and durable must-tool for wheel alignment adjustment..
  • Universial Automotive Tool For Wheel Alignment, Easy to use, Save you a lot of cost, You could Do the alignment works at home easily..
  • It has a powerful magnet could be easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before....
  • The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or....
Check Stock

OMT Spring Compressor 11-1/2 Macpherson Strut Spring Compressor 13/16 Socket 1/2 Drive to Compress The Coil Spring Set of 2

  • ...5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)..
  • Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice..
  • 1-YEAR WARRANTY: Orion Motor Tech backs these spring compressors with a generous 1-year warranty as well as our usual friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check Stock

ATPEAM Macpherson Strut Spring Compressor 2pc Heavy Duty Coil Spring Compressor Strut Remover Installer Tool, 13/16in Socket 1/2in Drive

  • ... black anodic oxidation coating to prevent rust and corrosion, high durability and corrosion resistance under even punishing use, constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair.
  • Safe & Stable Grip: The wide end pieces lock on to your coil springs quickly and easily and keep a secure hold as you work, with locking pins offering additional security and precision, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils.
  • Contents: 2pcs 10.5 inch range coil strut spring compressor with safty locking pins, 1 pc. high quality storage case.
  • Storage Case: The strut spring compressors is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

Bilstein B4 Front Struts & Rear Shock Absorbers Kit For BMW E90 E91 E92 3.0L L6

  • This package contains 2 front driver and passenger side complete struts. Each complete strut comes pre-assembled with a strut, coil spring, strut mount, boot, bumper kit, spring seat and isolator. A spring compressor is not required for installation.
  • OE / Interchange: 172901, 182901, 172902, 182902. Each strut is nitrogen gas charged.
  • ISO / IATF 16949 Certified, direct fit and made from high quality materials to meet OEM specifications. Backed by a 6-month warranty.
  • Replacement for 2013 2014 2015 2016 2017 Nissan Altima 2.5L 3.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application. Purchased bundles may only be returned as a complete bundle. Partial returns of bundles are not permitted.
Check Stock

AUTOSAVER88 Front Complete Struts Compatible with 2004-2008 Ford F150 2006-2008 Lincoln Mark Lt 4WD Shock Absorber Coil Spring Assembly

  • Fitments - Compatible with 2004-2008 Ford F150 , 2006-2008 Lincoln Mark Lt..
  • Quicker & Easier - Direct OEM fit with no special tools required! Conveniently remove and replace the complete strut assembly..
  • Oem Design - Precision-engineered components feature OE-style mount and coil spring. Perfectly mimics the original part’s ride height and....
  • Complete Strut Assembly - Equipped with Strut, Soil, Spring & Mounts - No additional work or special tool required for installation.(NOTE:....
Check Stock

Dreamgirl Women s Fishnet Thigh-High Stockings with Silicone Lace Top Black One Size

  • This package contains 2 rear complete struts. Each complete strut comes pre-assembled with a strut, coil spring, strut mount, boot, bumper kit, spring....
  • OE / Interchange: 271681, 281681, 281680, 271680, 181680, 181681, 171680, 171681, SR4036, SR4035. All struts are nitrogen charged.
  • ISO / IATF 16949 Certified, direct fit and made from high quality materials to meet OEM specifications. Backed by a 6-month warranty.
  • Replacement for 1993-2001 Lexus ES300 1992-1994 1997-2001 Toyota Camry 1997-2003 Avalon 1999-2003 Solara 2.2L 2.4L 3.0L.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is....
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

Unity Automotive 2-11040-001 Front 2 Wheel Complete Strut Assembly Kit 1990-1999 Buick Lesabre

  • This package contains 2 front complete struts. Each complete strut comes pre-assembled with a strut, coil spring, strut mount, boot, bumper kit, spring seat and isolator. A spring compressor is not required for installation.
  • OE / Interchange: 171593, 181594, 181593, 171594, SR4100, SR4101. All struts are nitrogen charged.
  • ISO / IATF 16949 Certified, direct fit and made from high quality materials to meet OEM specifications. Backed by a 6-month warranty.
  • Replacement for 2001-2012 Ford Escape 2001-2006 2008-2011 Mazda Tribute 2005-2011 Mercury Mariner 2.0L 2.3L 2.5L 3.0L.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application. Purchased bundles may only be returned as a complete bundle. Partial returns of bundles are not permitted.
Check Stock