Reviews Automotive Puller Tool

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

SCITOO 16PCS Blind Inner Bearing Puller Hole Collet Bearing Race Seal Puller Removal Tool Slide Hammer Tool Set

  • 【Compatible Vehicles】 Fit for bicycles, motorcycles, most compact cars, mid-size cars and light pickup trucks 8-53mm bore bearing. Includes various sizes and types of collets, blind, Internal, bearing puller, with wide application..
  • 【Package】 1x Sliding Hammer Assy, 1x 2 Claw Puller Assy, 3x Screw Adaptors, 10x Collects: 8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm, 1x Counter Stay Puller, 1x blow molded case for storage and carrying..
  • 【Product Usage】 Used to remove tightly jammed axles, wheeling bearings, and bushings on a wide variety of vehicles. This bearing puller tool is easy to operate, suitable for professional mechanics and DIY..
  • 【Advantage】 The SCITOO tool set has the best performance of high hardness and high toughness, durable and stable. The chuck is made of chrome molybdenum steel for excellent rust proof andcorrosion. You can buy with confidence..
  • 【Important Note】 We provide 1 year warranty for you. We will randomly send out red or blue portable case. When doing automotive maintenance always make sure all the tools are correctly used . Any question or problem, feel free to contact us..
Check Stock

ZEUSFIRE 42PCS Dent Puller Kit, Paintless Dent Repair Kit for Car Dent Removal, Dent Removal Kit with Golden Lifter, Bridge Puller, 100W Glue Gun, Dent Remover Tool for Car Dent Repair

  • ...n manual, you can quickly learn how to use these tools..
  • ULTRA STRONG STICKNESS: This dent repair puller kit is equipped with professional adhesive viscous glue for dent removal. 100W hot glue gun can heat and release glue in 3-5 minutes without dripping. High-viscosity glue sticks that bond securely and reliably to automotive surfaces for paintless dent repair, efficiently and labor-saving.(Tip: This tool is not suitable for corners or creases)..
  • WIDELY USED: This automotive dent puller kit with a wide range of repair functions, not only can we repair all kinds of car dents, but also do door ding repairs, and on the metal surface such as motorcycles, refrigerators, and washing machines. These car dent remover tools are not only suitable for professional car repairers to use in the shop but also suitable for house DIY paintless dent repair..
  • QUALITY SERVICE: We provide dent puller paintless dent repair tools with a 30-day money-back guarantee for any reason and a 3-year warranty. Please read the instruction manual carefully before use. If you have any questions about dent remove tool, please contact us immediately and we will help you solve the problem. Paintless Dent Repair kit——A Good Choice!.
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock

Keenso Car Fuse Remover, Multifunctional 12 Volt Fuse Puller Car Fuse Tester Removal Tool for MiniStandard Blade Fuse

  • 【Non-slip & Convenient】-- The end handle with anti-slip design, automotive fuse puller is convenient to use. Adjustable testing pins allows to be used on mini/standard and maxi automotive fuses.
  • 【Multi-Functional】-- This car fuse remover can be used as a practical tool to pull or remove the automotive fuses quickly and easily, check or test the blade fuse. Great tool for removing fuse blade.
  • 【Sturdy & Anti-abrasion】-- This fuse check is made of premium plastic material, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • 【Space-saving & Compact】-- Mini size and compact, the multi-functional automotive fuse tester won't occupy too much space, carry it around easily with the convenience. Material: Plastic.
  • Size: 70 × 30 × 25mm / 2.8 × 1.2 × 1in.
  • 【Specifications】-- Condition: 100% Brand New, Material: Plastic, Color: Orange, Size: 70 × 30 × 25mm / 2.8 × 1.2 × 1in, Package Weight: Approx.19g, Fitment: For mini/standard and maxi automotive fuses, Package List: 1 × Fuse Tester.
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

KINGCAESAR Dent Puller Kit, Paintless Dent Repair Kits with Bridge Puller & Hot Glue Gun, Dent Remover Kit for for Automobile Body, Motorcycle, Refrigerator, Car Large & Small Ding Hail Dent Removal

  • ...Our car dent repair tools are suitable for both professional and green hands, easy to use, and can pull out dents easily, most of the dents can be removed within 30 minutes. The professional glue gun can shorten the sol process time, quickly melt glue, high viscosity glue sticks that bond securely and reliably to automotive surfaces for dent removal. Also, we offer detailed manuals to guide you, please don’t hesitate to contact us if you need help..
  • 【Widely Used】Bridge puller can rotate the button to better fit the dents, suitable for any auto dents, repair door dings, hail damage, and other dents. 5pcs different shape and size pulling tabs can be fixed various shapes of dents, all dents can be easily removed with our innovative dent remover tool!.
  • 【Dent Puller Kit】KINGCAESAR dent puller kit Includes 1x bridge dent puller, 1x hot glue gun, 10 x strong stickiness hot melted glue sticks, 5 x different spacers, 1 x gloves, 1x manual, 1 x watering can, 1 x scrapers, 1x tool bag, it is perfect for removing various dents on the car..
  • 【Excellent Services】Dent puller with a wide range of repair functions, Suitable for any auto dents, repair door dings and hail damage, and other dents. Please read the product description and manual carefully before....
Check Stock

KUNTEC 3 Jaw Inner Bearing Puller Heavy Duty Pilot Sleeve Gear Extractor Internal External Pulling for Motorcycle Wheel Car SUV

  • 【Strong Material】3-Jaw Inner Bearing Puller Tool is constructed from carbon steel, the overall heat treatment, strong and durable. Corrosion-Resistant black oxide finish, preventing damage to bearings..
  • 【Well Equipped】3 Jaw Inner Bearing Puller removes bearings, pump bearings, bushings, removes all sleeve type bearings with 1/2"-2" inside diameter.
  • 【Advantage】The three-jaw design can apply pressure evenly to prevent damage to the bearing and ensure stability during use. There are two installation methods for the claw foot..
  • 【Labor Saving】Structure design, gently turning the small wrench can produce a strong pull force.
  • 【Wide Application】3 Jaw Bearing Puller is designed for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing, generator bearing, machine bearing etc.
Check Stock

Tribus Tools Oxygen and NOx Sensor Wrench (15/16\)

  • [SIZE]: 3 piece 3/8 & 1/2" drive O2 oxygen sensor wrench socket tool set.
  • universal 7/8"/22mm professional grade removal tool for cars & automotive.
  • [ITEM INCLUDES]: 1 vacuum switch socket & 2 puller sockets kit.
  • [MATERIAL]: Constructed of high performance (cr-v & cr-mo) vanadium and chrome molybdenum solid cast steel for strength and durability - finished with black oxide to prevent rust.
  • [APPLICATION]: Remove and install oxygen sensors and hex vacuum switches on vehicles.
  • [PACKAGE]: Packed in a blow-molded storage case.
Check Stock

DMDMBSR Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design

  • Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design.
Check Stock

Bussmann FT-3 Automotive Blade and Glass Tube Fuse Tester and Puller, 1 Pack

  • Designed for easy one-handed testing of glass and blade fuses – light glows when fuse is good.
  • Removes automotive fuses quickly and easily without the hassle of trying to use the wrong tool.
  • Molded in durable yellow plastic for years of use – bright yellow color makes it easy to spot in your tool box.
Check Stock

ABN Inner Tie Rod Removal Tool Set - Tie Rod Tool with 9 Crowfoot Adapters to Remove and Install Inner Tie Rod in Cars

  • Simply slide adapter onto inner tire rod end tool, lock in place with side collar, and then use 1/2-inch (1.27cm) ratchet or impact wrench (not included).
  • [Complete Front End Repair Tools Set]: Inner tie rod kit includes heavy-duty steel automotive tie rod tool and 9 adapters.
  • Tie rod remover kit’s crowfoot adapters come in sizes 1-1/2in, 1-7/16in, 1-3/8in, 1-5/16in, 1-1/4in, 1-3/16in, 33.6mm, 32.5mm, and 29mm.
  • [Built to Last]: Tie rod puller kit is constructed from steel with protective coating to increase strength and help protect your tool from damage.
  • Slide collar design on inner tire rod remover tool allows for quick adapter insertion and secure locking.
  • [Always Ready for the Job]: Keep your mechanic tools automotive suspension tool kit organized and easy-to-carry in the blow-molded case with sizes etched into plastic for easy identification.
Check Stock

RONRONS 5 Pack Mini Stainless Steel Pocket Pry Bar Crowbar Multifunction EDC Tool Survival Opener

  • [DURABLE]: Constructed of heavy duty stainless steel with a thin angled chisel end to wedge into tight spaces and provide maximum leverage without bending..
  • [APPLICATION]: Woodworking, automotive, home improvement, painters tool or beekeeping. Pulling apart walls, baseboard, trim remover, & pry off moldings..
  • [PRECISE]: Chiseled edge on both ends to remove paint, caulk, adhesive, residue, and gunk from metal, wood, cement, glass or hard surfaces..
  • [VERSATILE]: Nail puller, hex socket, hive tool, and bottle opener all built in for everyday carry tool..
  • [SIZE]: Mini bar is 6-1/2” long and 1” wide with 1/4.
Check Stock