Reviews Drive Shaft Puller Tool

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set

  • SHIPPING-IT will be shipped within 24hs, delivery in 7-12 days. Contact us if any problems..
  • This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts..
  • This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations..
  • Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case.
  • Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case.
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6"8" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and 6-inch and 8-inch gear pullers both have 6 positions..
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach,and a 8-inch gear puller with a 10.75-inch jaw spread and 8.75-inch jaw reach.
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock