Reviews Auto Mufflers

Delkevic US Forestry Approved Spark Arrestor for 13" and longer Delkevic Oval and Tri-Oval Mufflers

  • Compatible with Delkevic street bike mufflers.
  • Fits first generation 13" tri-oval mufflers with turn down outlet. Does not fit tapered end cap..
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05

  • Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with DL10 with Stubby 14" Carbon Fiber Round Muffler

  • Delkevic DL10 14" carbon fiber round mufflers are manufactured from a pre-formed composite carbon fiber sleeve and 304 stainless steel. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

S SIZVER Weld-On Muffler Series 4" Carbon Fiber Slant Tip 3" Inlet+Silencer

  • 【FITMENT】Compatible with 92-00 Honda Civic Coupe/Sedan.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-WRX02 Cat Back Exhaust System [Compatible with 02-07 Subaru Impreza WRX/WRX STI]

  • 【FITMENT】Compatible with 02-07 Subaru Impreza WRX/ WRX STI.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

J2 Engineering J2-CBE-035 Cat Back Exhaust System [Compatible with 90-99 Mazda Miata]

  • 【FITMENT】Compatible with 1990-1999 Mazda Miata.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Muffler tip type: rounded tip. Tip diameter (in): 4.5″. inlet/ outlet size (in): 2.25″. silencer included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Permatex 80335 Muffler and Tailpipe Sealer, 3 oz.

  • Seals holes and leaks in mufflers, tailpipes and around joints.
  • Temperature Range: up to 2000°F (1000°C).
  • Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters.
  • exhaust system must be cool before applying.
Check Stock