Reviews High Performance Mufflers

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,BLACK,3" OFFSET IN-CENTER OUT

  • Brand New Flowmaster Super 10 Series Chambered Muffler, Black Paint Finish, 3" Offset In & Center Out (Holley Part #843016).
  • Flowmaster Super 10 Series 409S Stainless Steel, Single Chamber mufflers are intended for customers who desire the loudest & most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver max performance. Super 10 Series mufflers are constructed of 16-gauge 409S stainless steel & fully MIG-welded..
  • Features: Flowmaster Reliability | 409SS Stainless Steel Construction | Super Aggressive Sound | Flowmaster Chambered Technology.
  • NOTE: Universal Muffler - Not a direct fit. Some adaptation required..
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Delkevic Aftermarket Slip On compatible with Yamaha VMAX 1200 Mini 8' Carbon Fiber Round Muffler 84-07

  • Mini 8″ carbon fiber mufflers are manufactured from a preformed carbon fiber sleeve and high grade 304 stainless steel. The Mini 8 are short and aggressive sounding..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Yamaha FJR1300 Mini 8' Carbon Fiber Round Muffler 06-21

  • Mini 8″ carbon fiber mufflers are manufactured from a preformed carbon fiber sleeve and high grade 304 stainless steel. The Mini 8 are short and aggressive sounding..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Suzuki Hayabusa GSXR1300Mini 8' Carbon Fiber Round Muffler 08-19

  • Mini 8″ carbon fiber mufflers are manufactured from a preformed carbon fiber sleeve and high grade 304 stainless steel. The Mini 8 are short and aggressive sounding..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic SS70 9" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic SS70 9" stainless steel oval mufflers are manufactured from high grade 304 stainless steel and polished to a mirror finish. This short muffler is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Full 4-2 compatible with Yamaha FJR1300 Mini 8' Stainless Round Muffler Exhaust 01-05

  • Delkevic Mini 8″ stainless steel round mufflers are made from high grade 304 stainless steel polished to a mirror finish. This short muffler has a large slash cut outlet and is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock