Reviews Anvil Work Gloves

1 Inch Blacksmith Anvil Forge Hardy Tool Set, Including Hot Cut Tool, Creasing Tool Stake, Bottom Fuller, Turning Bending Scrolling Fork

  • 【Creasing Tool Stake】Coated with blacksmith's hot wax for ultra protection and durability, fits 1 inch Hardy hole of an anvil or can be used in a vice. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • 【Hot Cut Tool】Designed a sharp and hard edge along the top, used in the anvil or clamped in a vise to cut hot metal. Place orange/red hot metal or iron bars over the edge and strike with hammer, it can cut most of the way through and prevent flying hot metal, avoiding damage to the face of a hammer or anvil..
  • 【Turning Bending Scrolling Fork】Used to bend fork in an anvil or in a vice. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for manually bending metal pretty quick and effective with a hammer or bending wrench..
  • 【Bottom Fuller】Used in anvil or clamped in a vise to shape metal. Use a hammer to work from the top while the hardy tool works from the bottom. This provides you different anvil surfaces and edges to work with. Designed square shank fits the square hole in the anvil and prevent rotation..
  • 【Professional-Grade Steel Hardy Tools Set】Forged of quality & heavy-duty steel, can withstand very high temperature, ....
Check Stock

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • Hot Cut Tool: Used in the anvil or clamped in a vise to cut hot metal. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick. Cut most of the way through, then break the piece off to prevent flying hot metal..
  • Creasing Tool Stake: Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
Check Stock

Love In Venice

  • Premium Material 22 lbs: This steel anvil is made of drop-forged, high-grade steel, which features high hardness, strength, and durability. Our steel....
  • Holes & Horns for Different Holes & Horns for Different Uses: Round horn and the flat horn of the anvil blacksmith are used for smoothing, bending,....
  • Polishing Treatment: With fully polished surface area, the blacksmith anvil is corrosion-proof and services long-lasting use through quenching....
  • Large Working Area: This anvil metal 22 lbs/10 kg forge comes with a comfortable and wide work surface, giving a large working area. The wide....
  • Wide Application: The anvil is ideal for hammering, straightening, and for shaping workpieces. It is widely used by metalworkers and smiths in any....
Check Stock

6-Inch Swivel Bench Vises,Heavy Duty Metal Milling Locking 360-Degree Swivel Work Bench Base 150mm Jaw Table Top Clamp Press Swivel Base

  • Sturdy and Durable - 6" Bench Vise has a cast iron body with steel U-channel bar for durability and has a flat portion that acts as an anvil and additional work surface,with 6" wide machinist jaws ,Maximum jaws opening: 5.9" ,Anvil Work-Surface 4.0"x 3.74" ,Machined 'T' Bar 7.5",Overall Dimensions: 6.9"(H)×13.4"(W),The base Installation distance 4.5"x 4.5"x 6.5".
  • Large Anvil Work Surface - This large work surface is machined smooth and designed for metal shaping or bending. Made from forged steel, this anvil work surface is more durable than work surfaces found on traditional cast iron vises..
  • Adjustable Direction - Rotate the table vise around its 360-degree swivel base and you can position your work in just the right spot. Once there, dual lock-down nuts keep it in place..
  • Strong Practicability - Power serrated steel jaws and clamps for great grip and strength，provides maximum clamping and holding power..
  • Widely Use - uyoyous workbench vice is perfect for home or business application, whether you are working with wood or metal, you just need to install it on the bench top or working truck and you can use it..
Check Stock

Happybuy Single Horn Anvil 66Lbs Cast Steel Anvil Blacksmith for Sale Forge Tools and Equipment Anvil Rugged Round Horn Anvil Blacksmith Jewelers Metalsmith Blacksmith Tool

  • [FULLY POLISHED] This Iron Anvil has fully polished surface area, The flat surface has been ground to a great finish, and the rest of the anvil was dipped in a protective paint/enamel. It's a great tool for crafting small stuff like silversmithing..
  • [EXTRA LONG]This Single Horn Anvil extra Long shaping horn design and the polished surface Top size : 11" x 4-5/8"(279.4x117.5mm), Base size: 10" x 7"(254x177.8mm),machined hardy holes with four anchor points.Rounded horn for smooth bending and shaping.Perfect balance, size and weight. Excellent size for craft projects..
  • [PERFECT FOR FORGING WORK] Many of the perks to having this anvil has been better reliability without the lack of mobility..
  • [MULTIFUNCTION]Rounded horn for smooth bending and shaping, Hardy hole for accessories, punching and bending.Clamped or bolted to the work bench to hold it still and it works just fine..
  • [WIDE APPLICATION]This anvil is great for metal-smiths, riveting, flattening, forging and forming metal,ideal for any handyman or hobbyist.This is a good mid sized anvil for most small to middle sized Jobs..
Check Stock

Earthworks Health Red Iron Oxide 10lb Bag

  • Premium Material 100 lbs: This cast iron anvil is made of drop-forged, high-rigid iron, which features strength and durability. Our anvil blacksmith with 209HB hardness can bear heavy blows. The solid base also keeps it sturdy..
  • Hole & Horn for Different Uses: The round horn of the blacksmith anvil can be used for flatting, bending, and shaping. And the hardy hole shows a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the round horn anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 100 lbs/45 kg forge has a 10.4 x 5 inch work surface, giving a large working area. The wide countertop and flat surface provide a smooth blowing..
  • Wide Application: The iron anvil is ideal for hammering, straightening, and for shaping workpieces. Metalworkers and smiths widely use it in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock

Happybuy Single Horn Anvil 22Lbs Steel Anvil Blacksmith for Sale Forge Steel Tools W/ Round and Square Hole and Equipment Anvil Rugged Blacksmith Jewelers Durable and Robust Metalsmith Tool

  • [FULLY POLISHED] This Iron Anvil has fully polished surface area, The flat surface has been ground to a great finish, and the rest of the anvil was dipped in a protective paint/enamel. It's a great tool for crafting small stuff like silversmithing..
  • [EXTRA LONG]This Single Horn Anvil extra Long shaping horn design and the polished surface Top size : 11" x 4-5/8"(279.4x117.5mm), Base size: 10" x 7"(254x177.8mm),machined hardy holes with four anchor points.Rounded horn for smooth bending and shaping.Perfect balance, size and weight. Excellent size for craft projects..
  • [PERFECT FOR FORGING WORK] Many of the perks to having this anvil has been better reliability without the lack of mobility..
  • [MULTIFUNCTION]Rounded horn for smooth bending and shaping, Hardy hole for accessories, punching and bending.Clamped or bolted to the work bench to hold it still and it works just fine..
  • [WIDE APPLICATION]This anvil is great for metal-smiths, riveting, flattening, forging and forming metal,ideal for any handyman or hobbyist.This is a good mid sized anvil for most small to middle sized Jobs..
Check Stock

Olympia Tools 9-Pound Cast Iron Hobby Anvil 38-789 , Gray

  • Premium Material 55 lbs: This cast iron anvil is made of drop-forged, high-rigid iron, which features strength and durability. Our anvil blacksmith with 209HB hardness can bear heavy blows. The solid base also keeps it sturdy..
  • Hole & Horn for Different Uses: The round horn of the blacksmith anvil can be used for flatting, bending, and shaping. And the hardy hole shows a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the round horn anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 55 lbs/25 kg forge has a 8.6 x 4.1 inch work surface, giving a large working area. The wide countertop and flat surface provide a smooth blowing..
  • Wide Application: The iron anvil is ideal for hammering, straightening, and for shaping workpieces. Metalworkers and smiths widely use it in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Forward CR60A 6.5-Inch Bench Vise Swivel Base Heavy Duty with Anvil 6 1/2

  • Jaw width:165.1mm(6.5"), Opening: 150mm(6"), Throat Depth: 97mm(3.8"), Anvil:3.1x2.9in.
  • More Durable and Sturdy: Material updated, all made from high strength ductile iron, PSI 60,000, bench vise can withstand a tough environment.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, etc. Tapping work can also be done on the anvil of....
  • More flexible: with 210 degrees rotating base, large anvil and corrosion resistant handle.
  • Perfect Dual-Purpose Vises: This 6.5" vise is suitable for both industrial and DIY home use.
Check Stock

HHIP 8600-1131 1 Ton Pro-Series Arbor Press

  • For riveting, squeezing, punching, bending, and other pressing applications.
  • Base is drilled for mounting on a bench or pedestal.
  • Removable machined steel anvil provides accurate work suppport in four slot positions.
Check Stock

Happybuy Single Horn Anvil 55Lbs, Cast Iron Anvil Blacksmith Withstands Heavy Blows,Anvil Rugged Round Horn Anvil Blacksmith Jewelers Metalsmith Tool, for Sale Forge Tools and Equipment

  • Premium Material 55 lbs: This cast iron anvil is made of drop-forged, high-rigid iron, which features strength and durability. Our anvil blacksmith is hard enough to bear heavy blows. The solid base also keeps it sturdy..
  • Hole & Horn for Different Uses: The round horn of the blacksmith anvil can be used for flatting, bending, and shaping. And the hardy hole shows a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the round horn anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 55 lbs/25 kg forge has a 8.1 x 2.7 inch work surface, giving a large working area. The wide countertop and flat surface provide a smooth blowing..
  • Wide Application: The iron anvil is ideal for hammering, straightening, and for shaping workpieces. Metalworkers and smiths widely use it in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock

SmarketBuy 66 LBS Steel Anvil Blacksmith Single Horn Anvil Forged Rugged Steel Anvil with Holes for Metal Forming Jewelry Making Work Surface Bench Tool (66LBS)

  • Premium Material 88 lbs: This steel anvil is made of drop-forged, high-grade steel, which features high hardness, strength, and durability. Our steel anvil blacksmith has excellent grade material of 50 HRC. The solid base also keeps it sturdy..
  • Holes & Horns for Different Uses: Round horn and the flat horn of the anvil blacksmith are used for smoothing, bending, and shaping. And the hardy hole and pritchel hole can show a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the blacksmith anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 88 lbs/40 kg forge comes with a comfortable and wide work surface, giving a large working area. The wide countertop and flat surface provide a better user experience. It can also bear a long time thumping..
  • Wide Application: The anvil is ideal for hammering, straightening, and for shaping workpieces. It is widely used by metalworkers and smiths in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock