Reviews Annealed Steel

Cast Master 1095 Steel Flat Stock for Knife Blades - Bar Stock High Carbon Steel Knife Making Supplies - Great Blacksmithing Blade Blank - Three Billet Set Elite

  • 1095 high carbon steel – With the recent popularity of DIY blade-making has come a huge variety of blade making steel. Our Cast Master Elite 3-pack features versatile annealed billets ready for your creativity. Each piece is 3/16ths of an inch thick..
  • Annealed & ready to work – Pure 1095 steel alloy bar stock comes annealed and ready for your knife & toolmaking experience. We recommend 1095 to our customers with a few tools or blades ‘under their belt’ as some beginners can get frustrated with it..
  • Pairs perfectly with our Cast Master Elite Forges – For amazing consistency & ease-of-use, our forges can’t be beat. Achieve temperatures quickly, and maintain without annoying fluctuations. Our CMF-1000, 2000, & 3000 model forges are excellent for all levels of experience..
  • High quality manufacturing – We insist on consistent tolerances both on the ingredient contents (carbon, chromium, manganese, etc.) as well as the forming of the bars themselves. You’ll be pleased to find virtually no warpage or variances in our 1095 steel bars..
  • Cast Master Elite USA – We’re a United States based business that designs products for the enthusiastic DIY crowd. We offer high quality blacksmith forges and furnaces, industrial tools, knife making supplies, ....
Check Stock

Round Hot Rolled Steel Plate 1/4\ x 4\ Diameter Circle (Pack of 2!)

  • 【BEST CHOICE FOR YOUR KNIFE】We provide you 1095 steel flat stock, the most perfect knife making steel, selected by lots of famous knife manufacturers. The super toughness and grinding degree make it very suitable for your handmade DIY knives..
  • 【COLD ROLLED & ANNEALED】We have annealed the high carbon steel to improve its machinability. You can easily process your knife steel that has good machinability, saving your time and abrasive belts..
  • 【SPECIFICATIONS】Each package contains four 1095 Steel Bar Stock, all of which has a size of 1.5" x 12" x 0.12". There are enough knife making steel for you. Create your own custom knife that will last a lifetime..
  • 【PERFECT PACKAGING】We use three layers of rust-proof packaging for 1095 steel flat stock: rust-proof oil, rust-proof paper, and bubble bags to prevent your knife making steel from rusting or being damaged..
  • 【WORRY FREE】If you are not satisfied with our 1095 steel flat stock, we will provide you a full refund or free replacement!.
Check Stock

20 Gauge 0.8mm 304 Stainless Steel Wire 328 Ft for Bailing Wire Sculpting Wire Jewelry Making Wire

  • 304 stainless steel , Rustproof , Heat Treatment: Annealed (soft) can be used for a long time.
  • Great for tie up craft projects and jewelry making.
  • Colors may vary a little because of different dye lots or due to monitor resolution.
  • Wire is shapeable 20-Gauge (0.8mm), 328 Ft. (100m) The number of items has not decreased，With nice long length, extremely flexible and very durable, enough for various craft projects.
  • Great for making jewellery components such as chain maille, beaded chain, jump rings, ear wires, and wire wrapped pendants,Useful for bonsai training wire, wrapping cords, tomato plants, vines, climbing roses, cucumbers, squash, and recyclables.
  • This stainless steel wire made of high quality stainless steel . annealed Soft bent easily.
Check Stock

Bullseye Metals 1/4 .250 Steel Plate 6\ x 12\ Flat Bar Mild Steel!

  • Knife Blade Steel Annealed and Ready for Stock Removal / Forging / Grinding / Sanding READY! 3-Pack.
  • 1095 is the Highest of the Carbon Grades Delivers Excellent Heat Treat Results! Perfect for Blades, Knives, Hand Tools, Shims, Etc...
  • Material Is Low Phosphorus, Low Sulfer, Calcium Treated To Enhance Internal Cleanliness In The As Rolled Condition..
  • (Hardness As Rolled: Rockwell C 15-45 Hardness) (Hardness Annealed: Rockwell B 95 Max).
Check Stock

5 Pack 12"x1.5"x0.12" 1095 Steel Flat Stock with Strict Quality Standards, The Perfect Knife Making Steel for Professional & Hobbyist Use, Annealed High Carbon Steel for DIY Knife Making - by TITGGI…

  • 【BEST CHOICE FOR YOUR KNIFE】We provide you 1095 steel flat stock, the most perfect knife making steel, selected by lots of famous knife manufacturers. The super toughness and grinding degree make it very suitable for your handmade DIY knives..
  • 【COLD ROLLED & ANNEALED】We have annealed the high carbon steel to improve its machinability. You can easily process your knife steel that has good machinability, saving your time and abrasive belts..
  • 【SPECIFICATIONS】Each package contains five 1095 Steel Bar Stock, all of which has a size of 1.5" x 12" x 0.12". There are enough knife making steel for you. Create your own custom knife that will last a lifetime..
  • 【PERFECT PACKAGING】We use three layers of rust-proof packaging for 1095 steel flat stock: rust-proof oil, rust-proof paper, and bubble bags to prevent your knife making steel from rusting or being damaged..
  • 【WORRY FREE】If you are not satisfied with our 1095 steel flat stock, we will provide you a full refund or free replacement!.
Check Stock

Extraction Proz 50-EXT-30 Glass Extractor Extraction Filter Tube 30' Long 50mm Diameter Clear with Stainless Steel Clamp

  • LAB GRADE GLASS - Made with Borosilicate Glass(Pyrex) Annealed at 1050 F Degrees to remove any stress from the glassware. This will make the glass stronger than poorly annealed or stressed glass..
  • 50mm DIAMETER / 2.0 INCH x 30 INCH LONG - The extra wide tube has more volume than other smaller tubes allowing more material to contained inside the tube. This will reduce the amount of runs needed to process all your material..
  • MADE IN USA - Proudly Hand blown here in Southern California, accept no substitutes. Don't risk your material by saving a few dollars..
  • STAINLESS STEEL CLAMP - The included stainless steel clamp will keep your filter securely in place so you can pack your tube with material and no worry about the filter coming loose. [ DO NOT OVER TIGHTEN CLAMP - IT CAN SHATTER THE TUBE ].
  • SATISFACTION GUARANTEE - Love your tube or we will buy it back from you - Simple as that..
Check Stock

Extraction Proz 50-EXT-12 Glass Extractor Extraction Filter Tube 12' Long 50mm Diameter Clear with Stainless Steel Clamp

  • LAB GRADE GLASS - Made with Borosilicate Glass(Pyrex) Annealed at 1050 F Degrees to remove any stress from the glassware. This will make the glass stronger than poorly annealed or stressed glass..
  • 50mm DIAMETER / 2.0 INCH x 12 INCH LONG - The extra wide tube has more volume than other smaller tubes allowing more material to contained inside the tube. This will reduce the amount of runs needed to process all your material..
  • MADE IN USA - Proudly Hand blown here in Southern California, accept no substitutes. Don't risk your material by saving a few dollars..
  • STAINLESS STEEL CLAMP - The included stainless steel clamp will keep your filter securely in place so you can pack your tube with material and no worry about the filter coming loose. [ DO NOT OVER TIGHTEN CLAMP - IT CAN SHATTER THE TUBE ].
  • SATISFACTION GUARANTEE - Love your tube or we will buy it back from you - Simple as that..
Check Stock

z-dup Repair Kit

  • 37˚ DOUBLE FLARING ADAPTERS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
  • 37˚ DOUBLE FLARE DIE SETS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
  • 37˚ CONE constructed of high quality machined steel.
  • CREATE PERFECT PRODUCTION QUALITY FLARES on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft copper tubing.
  • PRIMARY USES INCLUDE racing, restoration, hot rods, aviation.
Check Stock

DBD-05, Custom Handmade Damascus Steel Billet Knife / Blank Blade Making Bar

  • That particular piece is annealed , so you can achieve your required results.
Check Stock

Wazakura Annealed Copper Bonsai Training Wire Made in Japan Rust Resistant Outdoor Plant Cable 95.1 ft/29 m roll - 2mm Copper Wire

  • 【Specification】Length: 95.1 feet (29m) | Weight: 10.58 oz (300g) | Gauge: 2.0 mm | Material: Copper (annealed) | Origin: Sanjo city, Niigata prefecture (Japan).
  • 【Made in Japan】Real Japanese bonsai training wire 100% made by artisans and blacksmiths from the city of Sanjo in Niigata prefecture (Japan), area traditionally known for their metalworking skills..
  • 【Bonsai Shaping and Bending Use】The annealed copper bonsai training wire is ideal to use for bending thick branches or shaping the bonsai tree trunk. Copper wire is not as flexible as aluminum wire and can be work hardened quickly. But precisely because of the holding strength, it is great when you try to bend the trunk into new positions, as it will keep shape better..
  • 【Benefits of Annealed Copper】The copper is annealed by heating to a temperature that softens the bonsai wire. This process makes the wire easier to bend and hold branches well without requiring a high gauge, as it would happen if you used aluminum wire.. Annealed copper also tends to fade to a dull brown and match the bonsai trunk, so it's not intrusive and more aesthetically pleasing and the viewer can see more of the tree..
  • 【3 Sizes Available】Depending on your bonsai tree needs and the thickness of the branches an....
Check Stock

Parker 10 TX-S Triple-Lok Flare Sleeve 5/8 JIC Steel

  • Not flaring, soldering or other tube preparation.
  • One piece nut and sleeve reduces installation time.
  • Use with chopper, seamless steel and thermoplastic tubing.
  • Steel tubing must be cold drawn and annealed seamless low-carbon per sae J524 with a maximum hardness of Rockwell B65.
Check Stock

waltyotur 5c Collet Block Set- Square, Hex, Rings & Collet Closer Holder

  • PIN: The pin is made from 12 gauge annealed low carbon steel. Made in America..
  • BASEPLATE: 2" x 2" Square Plate made from glavanized steel..
  • ADHESIVE FOAM: 1/32" thick double sided foam with release paper..
  • TEMPERATURE RANGE: 0ºF to 140ºF, LOAD LIMIT: 2lbs per hanger.
  • Self-locking washers and dome caps sold separately.
Check Stock

Stainless Steel Continuous Hinge with Hole Bright Annealed Finish 6 Feet 3 Inches

  • Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.
  • Stainless steel 304 is corrosion resistant up to 1,500 degrees F, weldable, and stronger than steel and aluminum.
  • Bright annealed finish for additional protection against corrosion and a polished, mirror like appearance.
Check Stock