Reviews Aluminum Pedal Covers

LVBOUSLTD 3pcs Manual Car Pedal Set Nonslip Aluminum Pedal Cover Accessories for Clutch Brake Accelerator Extenders (Silver)

  • Package included: 3 pieces of pedal covers, Material: Aluminum alloy.
  • Functions: Insert a horizontally high-elastic non-slip tape in the middle of the pedal, enhance the friction coefficient of the foot and the pedal, the anti-slip effect is super good, the arc curvature is designed to ensure driving safety.
  • Size: Two small pedals Size: 9*7cm, four screws location are about 1,78 inch wide, can fit the original car pedal which size is less than 1,78*3,54 inch.
  • the large pedal Size 14,5c*8cm, the four screws are about 1,78 inch wide, can fit the original car pedal which size is less than 1,78*5,9 inch.
  • Available: Most vehicles are suitable, Suggest to measure your car original pedals before buying the extend Pedals..
Check Stock

BOYOUS 2pcs No Drill Aluminum Pedal Covers Anti-Slip Brake and Gas Accelerator Pedal Pads for F150 2015 2016 2017 2018 2019 2020,Not Fit 2009-2014,2021 F150(Red)

  • Fitment: Compatible with F150 2015 2016 2017 2018 2019 2020,Not Fit 2009-2014,2021 F150..
  • Function: PPE anti-slip rubber strip, increase pedal friction, filter sand and water of shoe bottom, When you drive car, with the help of pedal covers, accelerating and braking will be more steady and effortless.Fashion design enhances the style and appearance of your car,driving more safe Enlarge the area of the original Foot Pedal of your car..
  • Pedals Really Enhance the Look Of the Interior:These pedals are as sturdy and handsome as they look in the photos. Compared with all ordinary rubber pedals except for F150 performance version, they really enhance the appearance of the interior. Just a small expense to make the car look much sportier..
  • High Quality Aluminum alloy: This pedal cover made of high quality aluminum alloy with black anti-slip rubber,wear-proof and corrosion-proof, stay tight for long time using.Enjoy the super cool and exquisite appearance of your car after installing.
  • Easy installation: No drilling or welding required, Please remove the OEM brake pedal pad (the gas pedal pad remain in place) when installing ..
Check Stock

BORDAN for Dodge Ram Accelerator Gas Pedal Brake Pedal Cover Aluminum Alloy Foot Pedal Pads Kit Fit for Dodge Ram 2011-2018 1500 2500 3500

  • [Compatible for]: BORDAN Gas & Brake Pedal fits for Dodge Ram 2011 2012 2013 2014 2015 2016 2017 2018 1500 2500 3500..
  • [High-Quality Material]: Made of high quality aluminum alloy with black anti-slip rubber, wear-proof and corrosion-proof. 100% brand new..
  • [Safer Driving]: When you drive Ram, with the help of pedal covers, accelerating and braking will be more steady and effortless, strengthen the friction coefficient..
  • [Enhanced Appearance]: Upgraded design and fashionable outlook enhances and matches the interior with pedal pad set..
  • [Easy Installation]: Please immerse the pedal cover in hot water or use soap on the rubber portion, which will make it easier to install. No drilling or welding required. The existing rubber of the brake pedal(only brake pedal) need to be removed before installing this..
Check Stock

NEW WILWOOD LONG REVERSE SWING MOUNT CLUTCH OR BRAKE PEDAL ASSEMBLY WITH ADJUSTABLE PEDAL PADS, 6 TO 1 RATIO

  • Brand New Wilwood Long Reverse Swing Mount Clutch Pedal or Brake Pedal with Adjustable Pedal Pads (Wilwood Part # 340-13574)..
  • Wilwood's new Reverse Mount Swing Pedal assembly can be used as a clutch pedal with a single outlet master cylinder or as a brake pedal with a tandem master cylinder..
  • It features all aluminum frame and forged aluminum pedal arms with ladder style construction. ..
  • Features: | Can be used: | * As a Clutch Pedal with a single outlet master cylinder | * As a Brake Pedal with a tandem master cylinder that has a horizontal mounting, when used with a Wilwood Part # 250-3677 (not included with this pedal).
  • Lightweight | * All aluminum frame and forged aluminum pedal arms with ladder-style construction | * New waffle style pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance | * Features a 6:1 pedal ratio | * Easy mounting location | * Below you can view and download the instruction booklet for this assembly here..
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Jaronx Compatible with BMW Pedal Covers, No Drill Pedal Anti-Slip Gas and Break Pedal Cover (1' F20/2' F22/3' F30 G20/4' F32/5' G30/6' F12 G32/7' G11 G12/X3 G01/X4 G02/X5 F15 G05/X6 F16 G06/X7 G07)

  • ...o drilling or welding required. Installation instruction is included in the product pictures. Please remove the existing rubber cover on the break pedal, then install our Metal Break Pedal Cover.For the gas pedal, please put our Metal Gas Pedal Cover directly on the factory gas pedal..
  • Applied High-quality Material: Aluminum Alloy wire drawing pedal is non-deforming and edges of the stainless parts are pretty smooth. PPE rubber make the pedals waterproof, fireproof. Stay tight for long time using..
  • The difference between A Model and B Model is the size of the back rubber of gas pedal. Please check your gas pedal size before placing the order..
  • Soles got wet or covered with dust, sand will cause original pedal skidding.Our upgraded pedal can easily get rid off the sand and water, while increasing the friction between the soles and pedals.Preventing from slipping-off. Improve overall driving experience and more securely..
Check Stock

EVFIT Model 3 Model Y Performance Pedal Pads, Non-Slip Accelerator Brake Pedal Cover for Tesla Model 3 Model Y(A Set of 2)

  • Customized Design: Customized for Tesla Model 3 Model Y, more than 1000 peoples tested it, perfect matching, bring your car up a notch instantly, Enjoy your trip..
  • Handsome and Practical: High-quality aluminum alloy and Eco-friendly rubber materials are the perfect Tesla Model 3 Model Y accessories to our foot pedal pads, Combines elegance with the durability, versatility and functionality needed by us,Save your money..
  • Safe Driving: Quality of the pedal covers are cut out of stainless steel measured with slits in the middle for the rubber to show through.safe for driving and strengthen the friction coefficient..
  • Easy to Install and Clean: No installation tools required,NO drilling or welding,Protect your tesla model 3 model Y,easy clean with wet towel or wipes..
  • What You Get: A Set of 2 pedal pads,12-Month Warranty Service,7*24H Customer Service..
Check Stock

CULBERTA MTB Bike Pedals Universal 9/16 3 Sealed Bearing Non-Slip Lightweight Nylon Fiber Light Weight and Wide Platform Pedal for BMX Mountain Road Folding Bicycle etc 1Pair Pedals Black

  • LIGHT WEIGHT: CULBERTA bike pedals are sold in pairs, single pedal size: 5.2(L)*4.2(W)*0.5(H) inches, large area to fit the sole, more comfortable riding.
  • Only 0.41 lb for each pedal, lighter weight, more effective than aluminum pedals to reduce the bike weight for easy handling and low physical output in long-distance riding..
  • STURDY AND DURABLE PEDALS: Strong, lightweight nylon surface + high strength Cr-Mo spindle make the pedals strong and wear-resistant.
  • Withstand up to 220 pounds in mountain bikes, BMX and other high-intensity, off-road riding without worrying about breakage.
  • No worry about weight if just sitting on the bike saddle for normal riding.
  • STANDARD 9/16" SPINDLE: Universal 9/16" pedal is suitable for 99% of BMX, MTB, Mountain Bike, Hybrid bike, Ebike, Old School, Cruiser, Folding Bike, Road Bike, Track Bike, Unicycle, Urban Bike, except for a few kids bikes and older bikes use 1/2" cranks.Each spindle has 3 sealed bearings mounted on the inside by sealing rubber sleeves and dustproof covers on both ends, so no worry about dirt, rain or even mud preventing the pedals from spinning smoothly, noiselessly and quickly!.
  • 32 ANTI-SLIP SPIKES ENSURE A SAFE RIDING:Each pedal has 16 SS anti-slip spikes to ensure enough grip to effectively prevent....
Check Stock

Road/Mountain Bike Pedals - 3 Bearings 9/16” Aluminum Alloy Bicycle Pedals - Mountain Bike Pedal with Removable Anti-Skid Nails

  • 【Anti-Skid & Great Grips】: The lightweight, durable flat pedals are built around a aluminum chassis and offer top contact to your bike with their 7 pins per pedal side and a slightly concave surface. You will get The ease and maneuverability when you stand on large flat pedals without a fixed binding.
  • 【Sturdy & Durable】: Made of Aluminum Alloy body, Cr-Mo Steel Spindle and equally distributed antiskid nails- Lightweight, unbreakable and offer better grip force. CNC (Computer numerical control) Machining Technology- Whole pedal body carved from a raw aluminum alloy.
  • 【Sealed 3 Bearings Pedals】: Bearing reduces rotational resistance, 3 bearings make cycling more comfortable.
  • 【Wider Platform】: It is a wider, more comfortable pedal, 4.13(L)*4.02(W)*0.315(H)inches in size, only 0.34LB each.
  • 【Easy To Install】: L for left pedal, R for right pedal, 9/16 inch spindle suitable for most mountain bike, road bike, etc, this model pedal is covered by 3 years warranty. Its warranted against defects in material and workmanship under normal use.
Check Stock

Road/Mountain Bike Pedals - 3 Bearings 9/16” Aluminum Alloy Bicycle Pedals - Mountain Bike Pedal with Removable Anti-Skid Nails

  • 【Anti-Skid & Great Grips】: The lightweight, durable flat pedals are built around a aluminum chassis and offer top contact to your bike with their 7 pins per pedal side and a slightly concave surface. You will get The ease and maneuverability when you stand on large flat pedals without a fixed binding.
  • 【Sturdy & Durable】: Made of Aluminum Alloy body, Cr-Mo Steel Spindle and equally distributed antiskid nails- Lightweight, unbreakable and offer better grip force. CNC (Computer numerical control) Machining Technology- Whole pedal body carved from a raw aluminum alloy.
  • 【Sealed 3 Bearings Pedals】: Bearing reduces rotational resistance, 3 bearings make cycling more comfortable.
  • 【Wider Platform】: It is a wider, more comfortable pedal, 4.13(L)*4.02(W)*0.315(H)inches in size, only 0.34LB each.
  • 【Easy To Install】: L for left pedal, R for right pedal, 9/16 inch spindle suitable for most mountain bike, road bike, etc, this model pedal is covered by 3 years warranty. Its warranted against defects in material and workmanship under normal use.
Check Stock

Road/Mountain Bike Pedals - 3 Bearings 9/16” Aluminum Alloy Bicycle Pedals - Mountain Bike Pedal with Removable Anti-Skid Nails (Yellow)

  • 【Anti-Skid & Great Grips】: The lightweight, durable flat pedals are built around a aluminum chassis and offer top contact to your bike with their 7 pins per pedal side and a slightly concave surface. You will get The ease and maneuverability when you stand on large flat pedals without a fixed binding.
  • 【Sturdy & Durable】: Made of Aluminum Alloy body, Cr-Mo Steel Spindle and equally distributed antiskid nails- Lightweight, unbreakable and offer better grip force. CNC (Computer numerical control) Machining Technology- Whole pedal body carved from a raw aluminum alloy.
  • 【Sealed 3 Bearings Pedals】: Bearing reduces rotational resistance, 3 bearings make cycling more comfortable.
  • 【Wider Platform】: It is a wider, more comfortable pedal, 4.13(L)*4.02(W)*0.315(H)inches in size, only 0.34LB each.
  • 【Easy To Install】: L for left pedal, R for right pedal, 9/16 inch spindle suitable for most mountain bike, road bike, etc, this model pedal is covered by 3 years warranty. Its warranted against defects in material and workmanship under normal use.
Check Stock

MTB Pedals Mountain Bike Pedals Aluminum Alloy Non-Slip Bike Pedals CR-MO 9/16\ Spindle, Sealed Bearings Wide Pedal for MTB BMX, Black&Red

  • 【RUGGED DURABLE】 - The pedal is made of high-strength aluminum alloy and 4130 CrMo steel shaft. The frame structure of the pedal is CNC machined. The aluminum alloy frame is lightweight, strong and durable, and the high-strength steel shaft does not worry about trampling fracture.
  • 【WIDE PEDAL】- This pedals 0.91 pounds, 4.01 inches x 3.54 inches x 1.06 inches (102mm x 90mm x 27mm), the flat pedal design provides the best surface area for contact between your foot and the bike, while being strong enough to withstand the pedal force and occasional shocks.
  • 【FULL CNC PROCESS】: CNC process bearing foot pedal with brilliant dense magnesium aluminum alloy material. Steel nail studs are more grippy, and the hollow design reduces pedal weight..
  • 【UNIVERSAL PEDAL】 - Suitable for outdoor cycling, commuting to get off work, BMX, road bicycle, folding bicycle, mountain bicycle, city bicycle, etc. For cyclists who love braving mountain trails, marathons, or the bustling environment of a busy city, clipless bike pedals can provide an increased sense of finesse and control over their bicycle..
  • 【EASY TO INSTALL】 - The left and right pedals are distinguished when installing, CR-L is left-side installation, CR-R is right-side installation, standard 9/16 i....
Check Stock

Hecotrax Aluminum Alloy Pedal Cover for Dodge Challenger 2009-2020 Charger 2010-2020 Chrysler 300 300C 2010-2016 No Drilling Aluminum Brake and Accelerator Pedal Covers (Red)

  • Fit for Dodge Challenger 2009-2020 。For Dodge Charger 2010-2020。For Chrysler 300 300C 2010-2016。Not fit for Chrysler 300 2016。Not fit for Dodge charger SXT RT 2016-2018。Not fit for Dodge Challenger SRT R/T Scat Pack 2016。.
  • Premium Material : Aluminum alloy and rubber, Increase pedals contact surface for improved driving experience and safety factor. Metal and rubber do not fall off or separate. Non-slip rubber surface for added friction..
  • Safe and high quality experience : Changing the pedals will help you get a better driving experience and improve the safety of driving on rainy days. Even with flat shoes, the pedals are well controlled.Attention: Before purchasing, please measure whether the size of your car pedal is consistent with the size of the product ! !Because the year and car model of many models may not be suitable. Please be sure to measure your own vehicle pedals before making a reasonable purchase..
  • Antislip surface design : safety for driving and strengthen the friction coefficient,provides a more secure driving position with a firm place for your foot..
  • Easy Install : All you have to do is remove the factory pedal covers and replace it with this product, no drilling or welding required.Attention: Before purchasing, please meas....
Check Stock