Reviews Aluminum Based Pcb

YMDK Wholesales GH60 64 Anodized Aluminum CNC Case for GK64 DZ60 Type C GK61 Idobo 75 ID75 XD75

  • This link is only aluminum case which CNC Anodized.CNC Feet Included.
  • Compatible with GK64 GK61 PCB,GK61 64 Plate need to replace with gh60 plate.
  • New Type PCB GK64x GK64xs GK61x GK61xs support as well.Just need a GH60 plate is ok..
Check Stock

Keyboard Switch Sound Dampeners Sheet Silencer Foam Silencer Pad for Mechanical Keyboard（96 Layout）

  • 【Product Function】 Using this product can eliminate the cavity sound of the keyboard, increase the thickness of the tone, and reduce the resonance....
  • 【Easy Installation 】Install directly between PCB and steel plate without adhesive. And will not affect the light position of the keyboard..
  • 【Material】Made of soft sponge material, with high-efficiency noise reduction effect, and will not damage your PCB board..
  • 【3mm Thickness】Because the distance between the PCB and the positioning board is between 3mm and 3.5mm, this 3mm silencer pad is the best choice....
  • 【Warm Tips】This silencer pad is drawn based on the actual measurement of the keyboard. It is not manufactured by the original factory and cannot....
Check Stock

Chenyang Slim Type Mini PCI-E mSATA SSD to 2.5' SATA 3.0 22pin HDD Adapter Hard Disk PCBA

  • ➤ M.2 NVME SSD to PCIe 3.0 x4 channel for Key-M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ M.2 SATA-based SSD to SATA channel for Key-B/B+M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ mSATA to SATA channel for 30x50mm mSATA SSD.
  • ➤ With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation,Including 2 Aluminum Heatsink.
  • ➤ Including both regular size and low-profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation required.
Check Stock

Circuit Board Holder with Adjustable Heavy Duty Base Large Soldering Helping Hand Vise 360° Rotated For Clamping PCB solder DIY Printed Circuit Board Stand NEWACALOX

  • Non-slip PCB clips: The PCB clips on the holder is easy flips printed circuit boards 360°, use better elasticity springs to avoid slipping, easily....
  • Sturdy construction and easily adjusted. The Soldering helping hand holder is made of aluminum alloy and has 3 screws to tighten and fix, heavy and....
  • Equipped with 4 rubber feet under the base ensure stability, so the holder will not slide around on the bench. keeping safe. the base is solid and....
  • Adjustable PCB holder frame: The rolling bearing makes the bracket move more smoothly without jamming, the ability to rotate is great for switching....
  • Easy to Install and easy to use: It is very convenient to insert the pcb board and easy to remove. You could make any position adjustment you want by....
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Black

  • Black anodized aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Nickel

  • Nickle plated aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

Switch Sound Dampeners Sheet Soft Landing Pads Dimple Foam Sponge (87 Layout)

  • 【Switch Sound Dampeners Sheet】This product is a Switch Sound Dampeners sheet, which is placed between the keyboard's circuit board (PCB) and the positioning board. It is a must for keyboard lovers to DIY your keyboard..
  • 【3mm Thickness】Most of the silencer pads are designed based on a standard 1.5mm positioning plate. Due to the processing accuracy of the plate, the space between the PCB and the positioning plate ranges from 3mm to 3.5mm. Regardless of whether the keyboard switch is welded or hot-plugged, the 3mm silencer pad is the best choice..
  • 【Warm Tips】This silencer pad is measured and drawn according to the keyboard entity. It is not produced by the original manufacturer and cannot be guaranteed to be fully fitted. Some of the holes, gaps, and circles may be caused by too many models and brands of the same configuration and different designs. The hole is deviated. Please check carefully before placing an order..
Check Stock

New 2 x Rechargeable 10440 AAA 3.7V Li-ion Battery

  • 600mAh Li-Ion Rechargeable batteries with PCB.
  • These batteries are NOT regular AAA batteries and can only be used in devices that specifically accept high voltage 10440 batteries.
  • Built-in protection circuit module (PCB) increases length of battery by ~2mm.
  • Includes two quad battery storage cases to safely and securely store and protect your batteries.
  • US based seller dedicated to the highest standards of quality and service.
Check Stock

10440 Button Top 600mAh 3.7V Li-Ion Demonfire Protected Rechargeable Battery 6 Pieces

  • 600mAh Li-Ion Rechargeable batteries with PCB.
  • These batteries are NOT regular AAA batteries and can only be used in devices that specifically accept high voltage 10440 batteries.
  • Built-in protection circuit module (PCB) increases length of battery by ~2mm.
  • Includes two quad battery storage cases to safely and securely store and protect your batteries.
  • US based seller dedicated to the highest standards of quality and service.
Check Stock

Strobe Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Check Stock

Hammond Manufacturing 1553AGY 1553 MINI SOFT TOUCH CASE

  • 【Brand New】100% brand new high quality right electronic DIY aluminum box, strictly full tested to ensure the best quality before shipment, safe to use.
  • 【Application】Can be used for heat dissipation aluminum shell of electronic products, PCB junction aluminum box, anti-thunder protection aluminum case, DIY, etc..
  • 【Features】Using machine die-casting integrated molding, the surface is oxidized for beautiful appearance.
  • 【Easy Installation】Professional design and compact structure, convenient to use and not easy to damage. With complete accessories, easy to install and remove.
  • 【High Quality】Adopt high quality aluminum material, good heat dissipation and shielding signal performance.
Check Stock

60 Pieces Pin Vises Hand Drill Bits Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood,Jewelry, Plastic etc

  • 【Package Contant】1 piece pin vise hand drill, 48 pieces of micro twist drill bits (0.5-3.0mm), 10 pieces of PCB mini drill bits (0.3-1.2mm), and 1 piece bench vise..
  • 【Pin Vise】Made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
  • 【48 Pieces Twist Drill Bits 】Include 3 Pieces of 0.5，0.6，0.7，0.8，0.9，1.0mm size, total 18 piece.
  • 2 pieces of 1.1，1.2，1.3，1.4，1.5，1.6，1.7，1.8，1.9，2.0mm size, a total of 20 pieces.
  • 1 piece of 2.1，2.2，2.3，2.4，2.5，2.6，2.7，2.8，2.9，3.0mm size, a total of 10 pieces.
  • 【10 Pieces PCB Drill Bit】PCB mini drills are made of tungsten carbide, the shank diameter is approx. 3.175 mm, overall length is approx. 38 mm, which fit for processing PCB, normal FR-4, CEM-3 boards, SMT, CNC, molds, plastic, circuit board, carbon fiber, composite board and so on.
  • 【Fit dimension】 the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.
Check Stock

Fenlink 2.5" to 3.5" Internal SSD Hard Drive SATA Drive Converter

  • Fenlink 2.5″ to 3.5″ SATA Drive Converter: Turns your 2.5 inch SATA HDD / SSD into 3.5 inch so you can install it into your desktop PC and Apple Mac Pro models.
  • Superb Quality:Immersion Gold PCB manufacturing process using reasonable PCB layout design, stable transmission rate.
  • Excellent Performance: SATA III standard supports a theoretical maximum speed of 6Gbps, also backward compatible with SATA I/II.
  • Good Heat Dissipation: Open design allows for full air flow for proper drive cooling, Aluminum Alloy frame design and protects your hard drive.
Check Stock