Reviews Pcb Electroplating

Hao Pro Plug-in Screw Terminals Block Connector Pitch Good Solder Connect Tight Easy Insert Wire Reduce Confuse Handy for Panel PCB Breadboard Mount AC 150V 6A Green, 2.54mm-Green-2Pins-15Pc

  • Pin Number : 2 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock

Jucoan 380PCS M3 Male Female Nylon Hex Spacer Standoffs Screws Nuts Assortment Kit Threaded Pillar PCB Motherboard (Black)

  • Package includes 380 pcs M3 black nylon hex spacer motherboard standoffs kit with various specifications of hex spacers, screws, washers, and nuts to meet your different demand..
  • All of those small standoffs and spacers are well packed and classified in different grids of plastic box for easy to use and store..
  • Those M3 motherboard standoffs are made of high quality nylon, light weight and solid for long time use..
  • With the features of non magnetic, thermal insulation and corrosion resistance, the nylon assortment kit is suitable for industries of communication, electroplating, medical device, office equipment, electronics, etc.
  • This machine screw nut kit is easy to install and widely used in fixing PCB, drone, computer motherboard and other accessories..
Check Stock

Double Ended Pin Vise Model Hand Drill Set with 10 pcs Micro Twist Drill Bits Set for PCB Handicraft Jewelry Watch Making

  • 100% brand new and high quality,This pin vise chuck is adopted of brass material, processed by electroplating, beautiful and durable in use Double ended pin vise design,.
  • Adjustable Pin Vise is the largest and most robust pin vise in our line up of tools.
  • use it in both commerical and home applications ,Pin vice is useful for electronic assembling, tool-making, model making and hobbies,2 chucks,holding size from 0. 5 mm to 3.2 mm Suitable for PCB, handicraft, jewelry, watch making etc.not suitable for steel, iron stone, stone and other hard objects..
  • Holds small drills, deburrers, wires, files, reamers and other small tools that can be difficult to hold while working,Hexagonal heads on both sidesCan be used as hand drill.
  • Drill pin vise has a 3-jaw hardened steel keyless chuck and sturdy plastic handle that is ergonomic and easy to hold ,Compact size is perfect to go in a toolbox or in a pocket.
  • This product contains a double ended pin vise chuck, and 10 pcs different sizes twist drill bit, convenient for your diy project.
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

16pcs Solder Tips 900M Soldering Iron Lead-free Tips Replacement, Welding Needle Tip for Yihua,Vastar,NEWACALOX,Tabiger, solder iron/HAKKO 888D 936 937 969 Micro Soldering Station

  • High Quality Material: This solder iron tip made by imported oxygen-free copper which is different with other brands.
  • the shape is processed accurately, offer heating fast and long service time ..
  • 16pcs different shapes iron tips to your most soldering demand about the different components of PCB boards. suitable for electroplating, anti-corrosion, anti-oxidation, long life. come with a plastic box convenient for collecting tips after soldering..
  • Wide application: these pointed solder tips fit many brands of iron station, can help you get your work done faster and more efficiently.
  • The replacing soldering iron tips are suitable for 900M, 936, 937, 938, 969, 8586, 852D soldering station..
  • Dimension:the outer diameter of tip's bottom is 6mm and the inner diameter is 3.5mm(0.233inch),weight:5g. contain diverse models of welding heads, including round tips, flat tips, U angle tips, and knife type tips, which can meet your needs of welding components of different shapes and in different ranges of working space..
  • WHAT YOU GET:16 pcs 900M-T iron tips, 1pcs plastic box. Fits Hakko, Radio Shack 64-053, Atten, Quick, Aoyue, Yihua,Vastar,Sywon,Tabiger,SOAIY and other brand iron stations.,Not fit the Hakko 908 iron，900s iron..
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

GK64 GK64x Keyboard kit CNC Wood Wooden Case Wired PCB Plate Stabilizers Walnut Wired PCB

  • Package Included: CNC Case + Feet + Screws + GK64x PCB + Plate + Plate stabilizers.
  • CNC Wood Case and the stabilizers is Genuine plate mounted stabilizers.
  • Built-in microphone under spacebar, support External sound source play.
  • The plate is FR4 plate which more soft and silent.You need to attach plate with PCB by switches.Install 4-5 switches to plate then to PCB socket at....
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • This PCB Drill Bit Set contains 10 different size drill bits diameter: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm, 1.1mm, 1.2mm. And each size have 5 pcs. Varies sizes to meet different needs..
  • This micro drill bits are designed to drill and engrave on print circuit board and other precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
  • PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
  • cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
  • PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro d....
Check Stock