Reviews Alumina Linings

Simond Store Castable Refractory Cement 94% Alumina Dense, 3270°F Rated, High-Temp Castable Pre-Mixed Mortar for Foundry Furnace and Induction-44 Lbs.

  • EXCELLENT MECHANICAL STRENGTH: Characterized with improved particle size distribution, reduced water demand, 94% alumina density, helps to enhance its structural strength and resistance to thermal shock compared to castable of similar compositions..
  • HIGH THERMAL RESISTANCE: This castable refractory cement when applied offers high insulation value and can resist temperature up to 3270°F / 1800°C..
  • CHEMICAL RESISTANCE: It provides outstanding resistance to the penetration of acid, neutral, and basic slags..
  • ENHANCE EFFICIENCY: Because of the low thermal conductivity and good volume stability offered, it increases thermal efficiency of the equipment..
  • APPLICATIONS: Effective in applications at places with excessive wear and abrasive heating atmosphere. It can be used for thermal combustors, chimney linings and Refractory castable is ideal for maintenance or construction of fireboxes or other combustion applications below 3270°F use to cast a dome, or inner hearth in a pizza oven. Can also be used to cast a hearth for a furnace..
Check Stock

30 Pcs 1/2" x 12" Replacement Sharpening Belt Kit for Official Work Sharp Knife & Tool Sharpener (WSKTS & WSKTS-KT / Mk.1 & Mk.2) - 80/120/240/400/1000/2500 Grits

  • Compatiblity With: The 1/2" x 12" Replacement Belt Kit compatible with Official Work Sharp Knife & Tool Sharpener (WSKTS & WSKTS-KT / Mk.1 & Mk.2).
  • Package Included: 30 Packs 1/2" X 12" Knife Sharpener Sanding Belts: 5 pcs 80 Grits Zirconia belts, 5 pcs 120 Grits Zirconia belts, 5 pcs 240 Grits Alumina belts, 5 pcs 400 Grits Alumina belts, 5 pcs 1000 Grits Silicon Carbide belts, 5 pcs 2500 Grits US-Alumina belts.
  • Premium Abrasives: The material for coarse 80/120 grit is zirconia, medium 240/400 grit is alumina, fine 1000 grit is silicon carbide, and the polishing 2500 grit is US pyramid alumina. Wear-resistant and long lasting.
  • Wide Application: These Different Grinding belt Set meet all your sharpening needs. Derusting, deburring, blade edge sharpening, welding spot grinding and polishing for metal, wood, fiberglass, rubber, plastic etc.
  • Stable and Strong Joints: The joint is flat and smooth, dual directional tape joint allow a smooth transition in either direction, there is no jumping during the grinding process, safe grinding..
Check Stock

Flap Disc grinding wheel sanding discs 25 Pack 4.0

  • 25 pieces T27 aluminum wheel with high lead oxide alumina, 4.0 inch x 5 / 8 inch, 25 pieces of 60 grain size. It can be used for edge machining and profile application, providing a grinding angle of 10-15 degrees, can be used for edge machining or profiling application, and can effectively absorb vibration without generating stains, thus bringing more stable and effective..
  • High-Performance Bevel T27 Wheel high-density and high-quality zirconia is produced to make it compatible for grinding, with the maximum speed of 13, 000 RPM..
  • Safety made of alumina abrasives and zirconia alumina materials, it has longer service life than the standard alumina abrasives. It has a good heat dissipation, low noise, higher toughness and abrasive resistance, and it is specially designed for stronger and more economical grinding wheels..
  • Application Rust protection, Paint, nonferrous metals, chamfer, mixing by welding, stainless steel and nonferrous metals, cleaning and finishing, polishing, wood and plastic, the perfect products can meet your needs..
  • Thanks for buying]if you have any questions about our products, please send us email. We are 100 percent to help you with your purchase. If you have any questions, please feel free to contact us..
Check Stock

Sandpaper 80 Grit,Wet Dry Sanding Sheets,High Performance White Fused Alumina Abrasive Sand Paper for Wood Furniture Finishing,Metal Grinding,Automotive Polishing,9 x 11 Inch,Purple,10-Pack

  • 【PREMIUM MATERIAL】Made of white fused alumina abrasive,the benefits of White Fused Alumina in applications are high alumina content,which is the purest alumina(Alumina powder content 99%),low impurities,low heat generation and high grinding efficiency,it is very hard and sharp with a fast cleaning rate.Because of low iron content,Sandpaper color will not discolor the surface you are sanding..
  • 【ELECTRO COATED TECHNOLOGY】ensures the grit distributed homogeneously,anti-static,wear resisting and prevent clogging,So it will not fall apart,tear or crumble off during using,Cuts faster and Lasts longer than conventional sanding sheets..
  • 【DURABLE LATEX PAPER BACKING】Latex paper is durable,waterproof,good flexibility,wear-resistant.Will not easily break and damage during use,the durable backing stands up to the job on wet or dry surfaces,Suitable for wet sanding and dry sanding..
  • 【MULTIPURPOSE】Great for construction,carpentry,Auto Body Repair project,automotive polishing and home improvement projects,Suitable for wood,metal,plastic,drywall,fibreglass porcelain,art and craft as well as corner cleaning and polishing..
  • 【EASY TO IDENTIFY】The grits of the sandpaper are printed on the back for easy identification.Size: 9 x 11 inches, Package contents....
Check Stock

OTOOLWORLD 99.3% Alumina Crucible Al2O3 Assay Crucible for Lab Laboratory (100x40x20MM)

  • 99.3% Alumina, and can work maximum 1600℃.
  • Crucible use temperature: less than or equal to 1600 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
  • As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
  • please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..
Check Stock

OTOOLWORLD 99.3% Alumina Crucible Al2O3 Aluminum Oxide Crucible Assay Crucible for Lab Laboratory (500ml)

  • 99.3% Alumina, and can work maximum 1600℃, select the size you need.
  • Crucible use temperature: less than or equal to 1600 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
  • As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
  • please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..
  • please note: the color may a little different as photo because of the firing procedure, Will not affect the use.
Check Stock

OTOOLWORLD 99.3% Alumina Crucible Al2O3 Aluminum Oxide Assay Crucible for Lab Laboratory 120ML 90MMx35MM (90x35MM 120ML)

  • 99.3% Alumina, and can work maximum 1650℃.
  • Crucible use temperature: less than or equal to 1650 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
  • As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
  • please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..
Check Stock

TIG Welding Torch WP-17V 13ft 150Amp Air Cooled Lift TIG Torch for YESWELDER MIG-205DS MIG-250PRO MIG Welder ARC-205DS Stick WELDER

  • [UPDATED] A brand new Lift Tig gun with anti-aging rubber, outer woven material..
  • [APPLICATIONS] For YESWELDER MIG-250PRO MIG Welder, MIG-205DS MIG Welder and ARC-205DS Stick Welder..
  • 2. Accesories: 10N50 Alumina Ceramic Cup #4 (1/4" orifice)//10N49 Alumina Ceramic Cup #5 (5/16" orifice)//10N48 Alumina Ceramic Cup #6 (3/8" orifice)//10N25 Collet 1/8"(3.2mm)//10N23 Collet 1/16"(1.6mm)//10N24 Collet 3/32"(2.4mm)//10N28 Collet Body 1/8"(3.2mm)//57Y02 Long Back Cap//57Y04 Short Back Cap..
Check Stock

Sandpaper 400 Grit Wet Dry Sanding Sheets 9 x 11 Inch Advanced White Fused Alumina Abrasive Sander Paper for Wood Furniture Finishing Metal Sanding Automotive Polishing Purple,12-Sheets

  • 【PREMIUM MATERIAL】Premium Wet Or Dry Sandpaper Is Constructed with white fused alumina abrasive which is the purest alumina(Alumina powder content....
  • 【WET AND DRY SANDING】Latex paper backing is waterproof,good flexibility,wear-resistant.Will not easily break and damage during use,the durable....
  • 【ELECTRO COATED TECHNOLOGY】 Electro coated ensures the grit distributed uniformly, anti-static,wear resisting and prevent clogging, Has Maximum....
  • 【MULTIFUNCTIONAL】Suitable for construction,carpentry,Auto Body Repair project,automotive polishing and home improvement projects,Suitable for....
  • 【EASY TO IDENTIFY】The grits of the sandpaper are printed on the back for easy identification,Product Size: 9 x 11 inches, Package Including : 12....
Check Stock

Tockrop 24 PCS 1/2″ x 10″ Knife Sharpener Sander Belt Set for Work Sharp WSCMB Combo Knife Sharpener- 4 PCS each of 80/120/240/400/1000/1200 Grits

  • The 1/2″ x 10″ Replacement Belt Kit is for Work Sharp Combo Knife Sharpener (model WSCMB) and do not work with other Work Sharp products..
  • 24 Pcs 1/2″ x 10″ Sanding Belts in total, including 4 pcs 80 Grits Zirconia belts, 4 pcs 120 Grits Zirconia belts, 4 pcs 240 Grits Alumina belts, 4 pcs 400 Grits Alumina belts, 4 pcs 1000 Grits silicon carbide belts and 4 pcs 1200 Grits silicon carbide belts..
  • As a professional sanding belt manufacturer, after hundreds of trials, we find that for a knife sharpner, the best material for coarse grit is zirconia, for medium grit is alumina and for fine grit is silicon carbide. So we provide this Replacement Belt Kit for perfect sharpening..
  • Precision engineered dual directional tape joints allow a smooth transition in either direction..
  • Anti-clogging compounds extend the lifetime of the belts..
Check Stock

Denso (3297) SK20R11 Spark Plugs, Pack of 4

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Denso (4507) PQ16TT Platinum TT Spark Plug, (Pack of 1)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

NGK Spark Plug, NGK BPMR4A, ea, 1

  • Designed to operate over a much wider heat range than ordinary plugs.
  • High alumina ceramics for better heat transfer and electrical insulation.
  • Solid copper core and nickel tipped electrode provide a longer plus life.
  • Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
  • You can depend on NGK for quality and reliability.
  • Insulators constructed from 99 percent pure alumina silicate.
  • Solid core offers superior heat dissipation and conductivity.
Check Stock