Reviews Alternator Pulley Tool Kit

Small Block Chevy Serpentine System for 283 302 305 350 400 Engines- Power Steering and Alternator

  • Black Anodized Billet Aluminum Pulleys and Brackets CNC machined in the USA backed by our industry leading lifetime warranty!.
  • Works on 283 302 305 327 350 400 Engines With Long Water Pump.
  • Requires a Saginaw Power Steering Pump with Keyway Shaft and GM Alternator.
  • Kit Includes water pump pulley, alternator bracket, alternator fan, alternator pulley and cap, crank pulley, and power steering bracket with pulley. Alternator, Water Pump, and Power Steering Pump NOT included.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Check Stock

ICT Billet Corvette LS Alternator & Power Steering Pump Bracket Accessory Kit Turbo LS1 551521X-1

  • Made In Wichita, Kansas From Aerospace Grade, USA Billet Aluminum.
  • This Kit Requires The Use Of A Corvette Or (CTSV/G8/SS) Crank Pulley (12560115) ICT Billet (BAL100).
  • Compatible With Chevy Corvette G8 SS CTS-V Z06 LS1 LS2 LS3 LS6 LS7 L77 5.7L 6.0L 6.2L 7.0L Gen III IV (1997-2013) Series Engines.
  • Included in the package is the alternator, & power steering bracket, 1 smooth pulley, and all required mounting hardware..
  • This Kit Will Place The Alternator & Power Steering Pump In The Factory Corvette Location..
Check Stock

Big Block Chevy Pulley Kit 396 427 454 V-Belt - Long Water Pump

  • Chevy Big Block Pulley Kit, LWP, V-belt (396-427-454).
  • Made in the USA from 6061-T6 Billet Aluminum.
  • Designed for engines with Long Water Pump.
  • Give Your Engine the Strong American Made Pulleys that It Deserves!.
  • Includes single groove water pump, two groove crank, and single groove alternator pulley and cap.
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock

MAKOTOOLS Pulley Puller and Installer Kit, Power Steering Pump Remover Alternator AC Pulley Puller & Installer Set (MKT027)

  • AC Puller & Installer Set for alternator and power steering pulley, including the Quad 4. Fits Pulley shafts of 1-1/8″, 1-1/4″, 1-3/8″, 1-5/8″..
  • Manufactured from high-strength aluminum for extra durability and longevity..
  • Includes a blow molded carrying case with handle that provides safe storage, quick organization, and easy transportation..
  • Comes complete with adapters for unique style pulleys. Has reversible split jaws for easy access to pulley flanges without damaging pulley..
  • Installs & Removes pressed on alternator, power steering pump and other pulleys on late model GM & Chrysler engines as well as most other vehicles..
Check Stock

GDSMOTU 11392 AND0483 VND0483 104210-5910 Alternator Compatible with 3.5L for 2008-2012 for A-c-c-o-r-d, 2010 for A-c-c-o-r-d Crosstour Alternator 130AMP 12V

  • [COMPATIBILITY] - The Alternator Replacement Fits for 2008-2012 for A-c-c-o-r-d, 2010 for A-c-c-o-r-d Crosstour.
  • ⭐ [SPECIFICATION] - Unit Type: Alternator, Part Type: UNIT, Voltage: 12, Rotation: CW, Amperage: 130, Pulley Class: S6, Regulator: IR, Fan Type: IF, Brief: for A-C-C-O-R-D 3.5L 2008-10, for A-C-C-O-R-D 3.5L w/MT 2011-12, for A-C-C-O-R-D CROSSTOUR 3.5L 2010, 6-GROOVE PULLEY 66mm OD. Overload & Overheat protection, No noise could be reflected in GDSMOTU Alternator. If you find: dead battery, Lights or instrument panel lights dim, intermittent electrical issues, Please check alternator..
  • [OE PART NUMBERS] - 11392, AND0483,VND0483,104210-5910,31100-R70-A01,CSF91, VDN11300105-A, Manufactured by OEM Specifications with latest engineering & charging technology, Full Functionality & Superior Performance Alternator perfectly fit your vehicle.
  • [USE FOR] - When your vehicle stalling engine, sudden dashboard warning lights or failing electrical systems, our brand new alternator is a good choice for you to solve these problems. Die-cast aluminum alternator, Pure copper winding, external insulating coating to pr....
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

ICT Billet LS Truck 6 Rib LSA Supercharger Tensioner/Idler Bracket Kit LQ4 LSX 5.3L 6.0L 551789-3

  • Compatible With Truck SUV or LS3 L99 Camaro Crank Pulley.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Compatible with a factory LSA 8 rib Supercharger Belt Tensioner.
  • Includes: idler / tensioner base brackets, idler pulley, and mounting hardware.
  • Compatible with ICT Billet LSA truck or Trailblazer SS alternator and power steering bracket kit.
Check Stock

Trans-Dapt 9446 Alternator Pulley & Fan

  • 5.0L Coyote Engine This kit includes special high performance components as used on the production 2012-2013 Mustang BOSS 302 and is designed to operate at higher RPMs. This kit fits Mustang GT 5.0L Coyote engine and....
  • High performance BOSS Alternator with 1-way clutch to prevent belt hop-off during....
  • Larger pulley to slow the armature speed, reduce drag and reduce parasitic hp....
  • Also fits M-6007-M50 5.0L 4V TiVCT, M-6007-A50NA -....
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.
  • and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
Check Stock

Moroso 63841 Alternator Drive Kit

  • Big Block Chevy with Electric Water Pump This Alternator Drive Kit is crank-mounted and designed with spacers that can be replaced with pulleys to drive other accessories such as external oil and vacuum pumps. Note: Use Moroso 710-97170 Gilmer Drive Pulley if external oil pump is used..
Check Stock

Scitoo Alternators 130A CW 11392 fit Honda Accord 3.5L 2008 2009 2010 2011 2012 S6

  • COMPABILITY - Alternator for Honda For Accord 2008-2012 For Accord Crosstour 2010 3.5L.
  • Brief:For Honda For Accord 3.5L w/MT 2011-12.
  • COMPONENTS - Longer life of the alternator through the use of premium brushes and other critical.
  • CYCLING EXAMINATION - Rigorous and accelerated cycling examination to ensure product service, quality and durability.
Check Stock

Rareelectrical New 12V 55A Alternator Compatible With Yanmar Engines By Part Numbers 119626-77210 11962677210

  • Compatible with CAT, DENSO, JOHN DEERE, YANMAR and many more... Please verify your OEM part number from your original unit to help ensure fitment..
  • Replaces: YANMAR: 119626-77210, ITEM DESCRIPTION: ALTERNATOR, UNIT TYPE: DENSO, VOLTAGE: 12, AMPERAGE: 55, FAN: INTERNAL, REGULATOR: INTERNAL, PULLEY: V BELT, GROOVES: 1, REGULATOR CLOCK: 9:00, POLARITY: NEGATIVE, OUTPUT STUD DIMENSIONS: M6-1.0, MOUNTING EAR 1: M8-1.25 THREADED, MOUNTING EAR 2: 10.3MM UNTHREADED, SPECIFICATIONS: DUAL INTERNAL FANS, NOTES: 3-BLADE PLUG, WEIGHT: 7.49 LBS / 3.40 KG ....
  • Computer tested for consistent Quality and unsurpassed reliability.
  • Alternator - Voltage: 12V Amperage: 55 Amps Fan: Internal Regulator: Internal Pulley: V Belt Grooves: 1 Source: Aftermarket.
Check Stock