RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)
- Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
- Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
- Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
- Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
- Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)
- 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
- 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
- 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
- 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
- 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check StockMale Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10
- Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
- Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
- High Quality Material: The connector made of high quality plastic and stainless steel.
- corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
- Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
- Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check StockBeduan Union Tee 1/4\
- 【Universal Size】Compatible with1/4" OD Tube Hose..
- 【Push Type】Push lock union tee fitting. Designed for quick and simple installation, and compact one piece fitting assembly in tight places and for precise positioning.
- 【High Quality】304 Stainless Steel durable material. The high-quality tee manufactured to the highest standards required for air system applications..
- 【Good Performance】Quick construction for maximum strength and durablity. Support up to 250 PSI of air pressure..
- 【Usage】Worked great with the air bags for truck, air brake system, hdraulic system, industrial pneumatic tools and other applications..
Check Stock
Jienk 5PCS Pneumatic Male Straight 1/2\ Tube OD x 3/8\ NPT Thread Push to Connect Air Fittings, Quick Connector for Air Ride Air Horn Air Compressor
- 【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
- 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
- 【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
- 【Wildly Application】 Working Temperature: 32～140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..
Check Stock
DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial
- 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
- 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
- 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
- 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
- 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check StockBulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs
- Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
- Bulkhead Fitting Type: Push In Straight Male Connector.
- Body:Nickel Plated Brass Seal, O-Ring NBR.
- Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
- Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
- Fluid Admitted: Air, Vacuum, Water (No Freezing).
- Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock
Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack
- straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
- Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
- Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
- You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
- All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock
Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)
- SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
- Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
- Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
- It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
- this enhances the installation of the push connect fittings process in a narrow space.
- These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock
Jienk 40PCS Straight Push Connectors, Quick Release Pneumatic Air Line Fittings for 1/4 5/16 3/8 1/2 Tube Emergency Repair Your Leaking Air Hose
- 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
- 【Push Lock】 Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
- 【Wildly Application】 Working Temperature: 32～140°F. This Straight Push Connectors kit is most commonly used in the field for low-pressure hydraulic and pneumatic systems such as general industrial maintenance and automotive assembly,as well as moving parts such as air brake, air compressor and air ride..
- 【Flexibility】This combo concluded four different sizes of straight air line fittings(1/4,5/16,3/8,1/2), save you from varies emergency need, help you to repair your leaking air line..
Check StockHromee Air Line Service for Air Spring Suspension with Fittings Schrader Valves and 20FT Hose Air Bag Replacement Components
- AIR LINE TUBING - Outer diameter: 1/4 inch.
- Length: 20 feet. The red air line tubing is made of nylon that is light and flexible. The max working....
- EASY INSTALLATION - All the fittings are designed with PTC (push-to-connect). Hose installation is done by pushing the tube into the hole until the....
- UNIOn TEE - It can be used to tie a set of air springs together for a single path installation. Push-to-Connect fitting for easy connection to air....
- INFLATION VALVE - Two schrader valves are made of brass that is for maximum strength and durability. Designed to inflate or deflate manually your air....
- ELBOW FITTINGS - The elbow fittings are connected with 1/4” air tube. One head is 360 swivel 1/4” FNPT thread and the other head is 1/4” push to....
Check StockDELTA FAUCET 1920-DST Traditional Beverage Faucet, Chrome
- Works with RO systems, filtered water systems, or as a cold water tap.
- Air gap included with 1/4 in. tube for RO system and 3/8 in. tube for drain.
- Mounting wrench to assist in tightening mounting nut securely.
- Integrated supply tube with 3/8 in. compression fitting.
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard.
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines.
- Recommend minimum 2-1/2 in. clearance to backsplash.
Check Stock
ANRIWT Air Brake Line Fittings,1/4" DOT Air Fittings Brass Push in Fitting, Push to Connect Union Fittings, Air Brake Union 1/4" Tube OD for Trucks Trailers Use and Industria Workshops (4 PCS)
- 【PREMIUM MATERIAL】：Our air brake fittings are made of high quality CA360 brass,Meets D.O.T FMVSS 571.106 ,SAE J1131 Air Brake system Requirements and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4" ..
- 【EASY TO USE】: Union connect two tube with same OD. All dot air quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
- 【TYPICAL APPLICATION】：Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair..
- 【PRESSURE RANGE】: Air brake fittings working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mut....
Check Stock
