Reviews Bite Type Tube Fitting

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

• Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
• Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
• Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
• Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
• Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

• Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
• Bulkhead Fitting Type: Push In Straight Male Connector.
• Body:Nickel Plated Brass Seal, O-Ring NBR.
• Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
• Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
• Fluid Admitted: Air, Vacuum, Water (No Freezing).
• Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

• 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
• 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
• 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
• 【Easy to install】: Our air fitting kit quicks....

HydraFlex Tube - Replacement Hydration Reservoir Non-Kinking Drink Tube - 36” Durable Clear TPU

• BLASTER VALVE - High-flow blaster bite valve self seals after each sip and features a twist on/off bar to prevent leaks when not in use..
• FLEXIBLE - Non kinking tube designed for easy routing..
• PLUG-N-PLAY - Universal ¼ in diameter fitting with quick connect system..
• 100% BPA & PVC FREE - No weird taste, no unnecessary and harmful chemicals..
• BEYOND LIFETIME : If you experience any issue, we’ll repair or replace the item for free. Whatever it takes to keep your adventure going..

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

• Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
• Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
• High Quality Material: The connector made of high quality plastic and stainless steel.
• corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
• Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
• Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..

Swagelok SS-400-3 Stainless Steel Tube Fitting, Union Tee, 1/4\ Tube OD

Beduan Union Tee 1/4\

• 【Universal Size】Compatible with1/4" OD Tube Hose..
• 【Push Type】Push lock union tee fitting. Designed for quick and simple installation, and compact one piece fitting assembly in tight places and for precise positioning.
• 【High Quality】304 Stainless Steel durable material. The high-quality tee manufactured to the highest standards required for air system applications..
• 【Good Performance】Quick construction for maximum strength and durablity. Support up to 250 PSI of air pressure..
• 【Usage】Worked great with the air bags for truck, air brake system, hdraulic system, industrial pneumatic tools and other applications..

Jabsco 34060-0130 Marine Engine Oil Drain Hand Pump (10.25' Long, 1.25' Diameter),Brass

• Screws onto threaded male 3/4″ garden hose fitting on top of dipstick tube.
• Complete with 2′ of 1/2″ ID drain hose.
• Fitting: connection for 3/4″ GHT male thread.
• Dimensions: 10-1/4″ long x 1-1/4″ diameter..

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4\ Tube OD x 1/8\ NPT Thread

• Made of quality plastic and stainless steel for durable use.
• Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
• Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
• Working Temperature: 0-60°C | 32～140°F.

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4 Tube OD x 1/4 NPT Thread

• Made of quality plastic and stainless steel for durable use.
• Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
• Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
• Working Temperature: 0-60°C | 32～140°F.

uxcell Push to Connect Tube Fitting Male Elbow 4mm Tube OD X 1/8NPT Thread Pneumatic Air Push Fit Lock Fitting

• 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
• Type: 90 Deg Swivel Elbow Male Connector.
• Tube and Thread Size : 4mm OD x 1/8" NPT Male.
• Operating temperature：-10 - 60 Degree Celsius.
• 【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
• 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
• 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

• STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
• SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
• LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
• SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
• APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..

KUYOU Hydration Bladder, 2 Liter Water Bladder Leakproof Water Reservoir Hydration Pack Replacement with Auto Shut-Off Valve for Running Hiking Riding Camping Cycling Fit Most Hydration Pack (Blue)

• ...dration bladder made of premium material, which is no plastic taste and safe for drinking. With dust proof cover design, absolutely keep it clean. Just feel free to drink it..
• MILITARY LEAKPROOF - With upgrade 90 degree rotatable soft mouthpiece allows for easy drinking. Shut On/Off valve helps to adjust water flow. Bite can control water flow conveniently and effectively. Even not bite, water don't leak out. With detachable quick release tube, auto shut off while the tube is removed, the 2L bladder still stay filled without leak. Passed pneumatic pressure test, 24 hour swing test and 24 hour vibration test. It is completely pressure-tolerant and leak proof..
• EASY & QUICK TO DRINK - With high flow bite-valve, you won't be slowed down while hiking.You won't be slowed down with our high flow bite-valve. Please notice that the bite valve is the "bite and suck valve". Firstly, pull the valve in the "on" position. Then put it in the mouth, bite the groove gently with your teeth, sucking the valve at the same time. It will pop open and fluid flows freely..
• STRONG DURABILITY - Water bladder withstand temperatures from -20 to 50 degrees celsius, and resists temperature changes in hot and cold weathers. The tube (0.4'' diameter, 36'' long) provides a wholesome f....