Reviews Air Line Pneumatic Fitting

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

TL TOOLEGIN Push to Connect Fittings 3/8" Tube OD x 1/4" NPT Male Air Line Fittings Air Hose Fittings Pneumatic Fittings DOT Air Fittings Air Compressor Quick Connect Fittings Brake Line Fittings 5pcs

  • This 3/8" push to connect elbow fitting is designed for use in pneumatic systems, operates with a working pressure of vacuum to 250psi and temperature range of -40℉ to +200℉..
  • Constructed with high-quality CA360 brass casting for long-lasting performance. Resistant to corrosion and rust, ensuring a leak-free connection for a long time..
  • TL TOOLEGIN air line fittings meet rigorous safety standards with D.O.T FMVSS 571.106 certification, ideal for those seeking a durable and reliable solution for their pneumatic system needs..
  • Easy to install, simply push the tubing into the air hose fitting to create a secure, leak-free connection. No tools, soldering, or crimping required. The fittings elbow has a compact design, allowing for flexible installation in tight spaces..
  • Widely Used, these air brake fittings are suitable for a variety of fluid and air transfer applications, such as air compressors, pneumatic control systems, and vacuum systems..
Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

  • straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

YaeTek Pneumatic 4.2CFM Air Operated Vacuum Pump A/C Air Conditioning System Tool Auto

  • Easy to Operate - Just connect a continuous air supply (80psi) to the "Air Input" fitting (standard 1/4" NPT) at the back of the pump, connect the Air Line and it will Pull Full Vacuum in Less Than 2 Minutes.
  • Applicaton - Great for Automotive Air Conditioning System, Home Air Conditioner, Refrigerators, Freezers etc..
  • Function -This AC Pump can Eliminate Moisture from Automotive/Home/Freezers etc Air Conditioning System, Makes It Safe and Easy To add Refrigerant.
  • This Pump can be used for R134a and R12 Automotive air conditioning.
  • Pneumatic 4.2CFM air operated vacuum pump with Fittings included.
Check Stock

5 Pieces Pneumatic Ball Valve Push to Connect Fittings Ball Valve PVC Air Flow Control Valve Air Fittings Straight Quick Connect Union Air Quick Connect Air Hose Fittings (1/4\ x 1/4\ OD)

  • Size Information: you will receive 5 pieces of black air line valves, classic combinations can meet your daily use.
  • At the same time, the size is 1/4 inch OD, please read our information sheet and consider whether the size fits.
  • Quality Material: pneumatic fittings with reliable plastic materials and copper, not easy to fall off after connection.
  • They don't break easily, and have nice sealing performance, not easy to leak.
  • Air valve can be applied for a long time.
  • Working Pressure: quick connect tube fittings can be applied to water (maximum pressure: 50 PSI) and air (maximum pressure: 145 PSI).
  • When be applied with water, the pressure shall not exceed 50 PSI, and operating temperature: 32 to 140 Fahrenheit.
  • Easy Operation: after installation, you can freely change the direction of the push to connect fitting without manually inserting or pulling.
  • They are easy installation, flexible, save space, freely rotate, release ring ellipse design, easy disassembly.
  • Wide Applications: quick connect air hose fittings are suitable for air duct, pneumatic tools and so on, you can use them to connect others and different pneumatic components.
  • They are suitable for PU/ PA/ PE/ PVC products.
Check Stock

beduan Water Oil Separator Filter 1/4 NPT Male and Female Thread Spray Gun Filters Air Line Compressor Fitting （Pack of 2）

  • Material : Aluminum Alloy ,Plastic. Rust-proof aluminum housing and brass fittings provide additional tool durability..
  • Max operating air pressure is 90 psi（0.62mPA）..
  • Size : Universal 1/4" NPT Inlet and Outlet Thread. Can be connected with spray paint gun, air line fitting, pneumatic tools..
  • Eliminate water, oil, moisture, dust and particulates in the spray gun filter, air compressor line, ensure the dry gas, effectively extend the life of....
  • Clear polycarbonate housing allows you to monitor amount of dirt and debris is being caught to know when to change the filter. Press of the release....
Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

  • PRESSURE REGULATOR: The speed and precision of air flow are controlled by a Regulator, while the air that passes from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
  • EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
  • EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
  • AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
  • CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter....
Check Stock

Jienk 40PCS Straight Push Connectors, Quick Release Pneumatic Air Line Fittings for 1/4 5/16 3/8 1/2 Tube Emergency Repair Your Leaking Air Hose

  • 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】 Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
  • 【Wildly Application】 Working Temperature: 32～140°F. This Straight Push Connectors kit is most commonly used in the field for low-pressure hydraulic and pneumatic systems such as general industrial maintenance and automotive assembly,as well as moving parts such as air brake, air compressor and air ride..
  • 【Flexibility】This combo concluded four different sizes of straight air line fittings(1/4,5/16,3/8,1/2), save you from varies emergency need, help you to repair your leaking air line..
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Beduan Union Tee 1/4\

  • 【Universal Size】Compatible with1/4" OD Tube Hose..
  • 【Push Type】Push lock union tee fitting. Designed for quick and simple installation, and compact one piece fitting assembly in tight places and for precise positioning.
  • 【High Quality】304 Stainless Steel durable material. The high-quality tee manufactured to the highest standards required for air system applications..
  • 【Good Performance】Quick construction for maximum strength and durablity. Support up to 250 PSI of air pressure..
  • 【Usage】Worked great with the air bags for truck, air brake system, hdraulic system, industrial pneumatic tools and other applications..
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

BOSTITCH Finish Nailer, Angled, 15GA, 1-1/4-Inch to 2-1/2-Inch (N62FNK2)

  • This pneumatic nailer is the world's first 15GA tool with ultra-quiet rear exhaust to direct air away from the user.
  • Integrated air blower of 15 gauge finish nailer allows user to clear away debris from work surface (patent-pending).
  • LED work-light for working in closets and dark spaces.
  • Adjustable trigger with safety lock-out allows the user to choose between single or multiple fastener drive mode.
  • 16-inch on-center gauge fl ips out for quick and easy installation of baseboard (patent-pending).
  • Other features include: Oil-free operation, rear trip design for clear line-of-sight and dial-a-depth adjustment for precise fastener placement.
  • Kit includes: Tool, Carrying Case, 2 Standard No-Mar Tips, 4 Profile No-Mar Tips, 1/4-inch Air Fitting.
Check Stock