Reviews Air Condition Enclosure

USB C 3.2 MacBook SSD Enclosure for 12+16 PIN MacBook Air/Pro SSD, Aluminum M.2 NVMe MacBook Pro Enclosure Adapter Support MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017

  • ⚡⚡【Designed for MacBook】USB 3.2 Gen 2 Apple ssd enclosure compatible with 12+16 PIN MacBook Air/Pro SSD, also compatible with Toshiba MacBook SSD/Toshiba MacBook SSD 656-0021A and OWC Macbook SSD, compatible with 2013/2014/2015/2016/2017 MacBook Air Retina/Macbook Pro/IMac, equipped with adapter to support M.2 NVMe SSDs..
  • ⚡⚡【Extremely Fast Data Transfer】Macbook pro ssd enclosure is equipped with USB 3.2 Gen 2 interface, the average transmission speed is 10Gbps, USB 3.2 Gen 2 nvme ssd enclosure can also reach 20Gbps through USB 3.2 Gen2x2, which is very suitable for transmitting large files, and it only takes a few seconds to complete large files. save and transfer..
  • ⚡⚡【Advanced Heat Dissipation Technology】Macbook ssd enclosure adopts aluminum alloy design, which has better thermal conductivity than traditional ABS material. At the same time, the shell is designed in a fish scale shape, which expands the thermal conduction area, improves the thermal conduction effect, and is easier to hold..
  • ⚡⚡【Compatible Systems】USB 3.2 Gen 2 Macbook air ssd enclosure is compatible with Windows7/8/10/11, Mac OS 10.0, Linux 2.6 or later. Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro..
Check Stock

Focusing on Laser Engraving and Decorating: Affordable, Versatile, and Creative Marking, Engraving, and Cutting

  • Sleek Modern and Efficient look design – Excellent structural design ensures air tightness, protects your safety & health away from smog, noise, dust and pungent odor anytime and anywhere, maintains clean indoor air..
  • Flame Retardant and Smoke-Proof – xTool Enclosure has careful material selection.Outer PU cross-grain layer is waterproof for wiping and cleaning. And the inner 600D flame retardant polyester fabric layer is fireproof and has a strong smoke barrier..
  • Sturdy Construction – The honeycomb board material layer is chosen for the middle layer of the housing material and supplemented by 1 Polyester edge ensures high hardness for xTool Enclosure..
  • Foldable & 1 Minute Set Up & All in One Design- Smart elegant shaped design, xTool Enclosure using the principle of airflow to greatly improve the exhaust efficiency to 200%. Storage design on the side of the enclosure greatly improves the space utilization..
  • Ultra Eye Protection – Above the enclosure is a 17.91”x9.84” (455x250mm) viewing window made of laser light filtering PC. You can observe the laser engraving and cutting process more safely. Suitable for most Laser Engravers on the Market – Product size Up to 24.6”x 24”x 12.2” (Inner size: 23.6”x 23.2” x 11.8”) ,xTool E....
Check Stock

USB C 3.2 Gen2 MacBook SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro MacBook Air Mac Pro iMac from 2013 to 2017, with Adapter to Support M.2 NVMe SSDs (PCIe NVME/PCIe AHCI Protocol)

  • [Upgraded MacBook SSD Enclosure] The USB C 3.2 SSD enclosure works well for all Apple original Mac SSDs with 12+16 Pins. Compatible with Toshiba and OWC brand SSDs. Also support M.2 NVMe SSDs with an enclosure interface adapter..
  • [2022 Latest High Speed Chip] Support PCIe NVMe protocol / PCIe AHCI protocol SSD, better work efficiency and more secure data protection. USB 3.2 Gen 2 Macbook air ssd enclosure is compatible for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Compatible with Windows, Mac OS, Linux, iOS..
  • [Faster Data Transmission] Macbook pro ssd enclosure with USB 3.2 Gen2 interface, the transmission speed is 10Gbps(USB-C to USB-A). It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2.(USB-C to USB-C). Downward compatibility with USB 3.1 gen2, USB 3.0, USB 2.0. It only takes a few seconds to save and transfer files..
  • [SSD Installation Steps] Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the ssd enclosure. Align the ssd with the card slot on the ssd base and gently push it in. Tighten the screws with a screwdriver to fix the ssd on the ssd base. Tighten the 4 fixing screws on the cover with a screwdriver, and the installation of the ssd is completed. ❤N....
Check Stock

Rockville SK512 Package 12 1400w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 12" K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1400 Watts.....
  • CEA Rated RMS Power Handling: 350 Watts. Final Impedance: 4 Ohm. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15....
  • Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub. Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of....
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote..
  • CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such....
Check Stock

Rockville Rock Shaker 12\ Inch Black 800w Powered Home Theater Subwoofer Sub

  • Rockville Rock Shaker 12 Black 800 Watt Powered 12" Home Theater Subwoofer. 800 Watts Peak / 400 Watts RMS. Built-in Class D Amplifier.
  • Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board).
  • High-grade vinyl enclosure covering with a beautiful finish. The enclosure is built with the perfect air space to maximize sound quality and punch.
  • Class “D” Amplifier Circuitry with Auto-Switching Power Supply. High-grade woofer with foam surround and paper cone.
  • Woofer has a Y30 grade magnet, and 2” 4-layer voice coil. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!. Enclosure is filled with fire resistant poly cotton. Detachable foam grill.
Check Stock

Skar Audio Single 12 2500W Loaded EVL Series Vented Subwoofer Enclosure | EVL-1X12D2

  • Single 12-inch Dual 2 Ohm EVL Series Loaded Subwoofer Enclosure (Ported Box).
  • Peak Power: 2,500 Watts | RMS Power: 1,250 Watts.
  • Subwoofer is Pre-loaded and Wired to a 1 Ohm Final Impedance Load.
  • Vented Design of Enclosure and Heavy Duty MDF Construction Allow for Maximum Bass.
  • Enclosure Air Space: 2.00 Cubic Ft | Tuned @ 38 Hz.
Check Stock

Skar Audio Single 10 2000W Loaded EVL Series Vented Subwoofer Enclosure | EVL-1X10D2

  • Single 10-inch Dual 2 ohm EVL Series loaded Subwoofer Enclosure (ported Box).
  • Peak Power: 2,000 Watts | RMS Power: 1,000 Watts.
  • Subwoofer is pre-loaded and wired to a 1 Ohm Final Impedance Load.
  • Vented design of enclosure and heavy duty MDF construction allow for maximum Bass.
  • Enclosure air Space: 1.65 Cubic ft | tuned @ 39 Hz.
Check Stock

Skar Audio Single 15" 2500W Loaded EVL Series Vented Subwoofer Enclosure | EVL-1X15D2

  • Single 15-inch Dual 2 ohm EVL Series loaded Subwoofer Enclosure (Ported Box).
  • Peak Power: 2,500 Watts | RMS Power: 1,250 Watts.
  • Subwoofer is Pre-loaded and Wired to a 1 Ohm Final Impedance Load.
  • Vented Design of Enclosure and Heavy Duty MDF Construction Allow for Maximum Bass.
  • Enclosure Air Space: 3.50 Cubic ft | Tuned @ 31 Hz.
Check Stock

Rockville Rock Shaker 12\ Inch White 400w Powered Home Theater Subwoofer Sub

  • Rockville Rock Shaker 12 White 800 Watt Powered 12" Home Theater Subwoofer..
  • 800 Watts Peak / 400 Watts RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board)..
  • High-grade vinyl enclosure covering with a beautiful finish. The enclosure is built with the perfect air space to maximize sound quality and punch..
  • The rear firing port is engineered for optimal sound. Class “D” Amplifier Circuitry with Auto-Switching Power Supply. High-grade woofer with foam surround and paper cone..
  • Woofer has a Y30 grade magnet, and 2” 4-layer voice coil. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!. Enclosure is filled with fire resistant poly cotton. Detachable foam grill.
Check Stock

Rockville Rock Shaker 10\ Inch White 400w Powered Home Theater Subwoofer Sub

  • Rockville Rock Shaker 10 White 600 Watt Powered 10" Home Theater Subwoofer..
  • 600 Watts Peak / 300 Watts RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board)..
  • High-grade vinyl enclosure covering with a beautiful finish. The enclosure is built with the perfect air space to maximize sound quality and punch..
  • The rear firing port is engineered for optimal sound. Class “D” Amplifier Circuitry with Auto-Switching Power Supply. High-grade woofer with foam surround and paper cone..
  • Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!. Enclosure is filled with fire resistant poly cotton. Detachable foam grill.
Check Stock

Rockville Rock Shaker 8\ Inch White 400w Powered Home Theater Subwoofer Sub

  • Rockville Rock Shaker 8 White 400 Watt Powered 8" Home Theater Subwoofer..
  • 400 Watts Peak / 200 Watts RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board)..
  • High-grade vinyl enclosure covering with a beautiful finish. The enclosure is built with the perfect air space to maximize sound quality and punch..
  • The rear firing port is engineered for optimal sound. Class “D” Amplifier Circuitry with Auto-Switching Power Supply. High-grade woofer with foam surround and paper cone..
  • Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!. Enclosure is filled with fire resistant poly cotton. Detachable foam grill.
Check Stock

Rockville VS12K54 12" K5 1400w Car Subwoofer in Vented Sub Enclosure Box - 4 Ohm,Black

  • Rockville VS12K54 Single 12" K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1400 Watts. Program Power Handling: 700 Watts. CEA Rated RMS Power Handling: 350 Watts. Final Impedance: 4 Ohm. MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub.
  • Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of enclosure: 35 Hz. 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire. 50 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish.
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Blue Stitching Cone Reinforcement Ensures Long Life. Polypropylene Dustcap. Gold-Plated spring loaded p....
Check Stock

SCULPFUN Laser Engraver Enclosure with Vent, Fireproof Laser Cutter Protective Cover, Smoke & Odor Insulation, Noise Reduction, Eye Protection, Suitable for Most Laser Engraving Machine, 700x700x460mm

  • 【High Strength Fireproof Material】The laser engraver enclosure is made of high-quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures. Please watch the video, we tested with fire for a few minutes without any problem..
  • 【Large Size & Wide Applicability】Extra large space for laser engraving machine protection cover (700*700*460mm/27.5*27.5*18in). Higher than other laser enclosure, can be used for laser rotary roller engraving taller objects. Compatible with most engraving machines on the market, such as fiber/co2/k40 laser engraver, as long as the size is within this range..
  • 【Eyes Protection & Slanted Viewing Design】Laser cutter enclosure viewing window size 53x60mm (20.8*23.6inch), made of double-layer dark PVC material, which can reduce the blue light produced by laser engraving and protect your eyes. The beveled design of the laser enclosure allows you to better observe the machine operation, giving you a good laser engraving experience..
  • 【Noise Reduction, Smoke & Odor Insulation】The laser enclosure isolates 99% of dust particles, smoke, odors, and noise during the cutting and engraving process. Ensuring your safe and healthy laser ....
Check Stock