Reviews Ai Laser Engraving Machinery

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

  • ...CB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks produci....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

Under Siege

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock

Platy for Prezi!

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock

Triumph Fiber Laser Marking Machine 30w for Permanent Metal Parts Engraver Marker Engraving Rotary jewllery Ring Firearm

  • With rotary attachment which you can work with for any cylinder shape material for engraving.Protection eye goggles included.Foot switch is included.Testing aluminium sheets included..
  • Engraving area 110x110mm and lens 200x200mm as spare.You can engrave all metals,polymer material,aluminum,stainless steel,copper,gun parts....
  • Free maintenance/Lifetime 100000 hours,good support from our servicemen.Operation videos,tutorial videoes,manuals,tools...included..
  • Computer included and Laser software EZCad installed,compatible 64bits or 32 bits computer system,supporting PLT, BMP, DXF, JPG, TIF, AI, PNG, JPG, etc formats,is installed,ready to work.
Check Stock

xTool M1 10w Compact 3-in-1 Laser Engraver & Cutting Machine with Rotary & Material Box, Higher Accuracy & Smarter 16MP Auto-Focus, Create Christmas DIY Wood/Metal/Paper/Acrylic/Iron-on/Vinyl

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
  • SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan with exhaust pipe quickly....
Check Stock

xTool M1 10w Compact 3-in-1 Laser Engraver & Cutting Machine for All Crafts, Higher Accuracy & Smarter 16MP Auto-Focus, Create Customized Wood/Metal/Paper/Acrylic/Iron-on/Vinyl, Home Decor & More

  • 3-IN-1 INNOVATION: World’s first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system.
  • SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan with exhaust pipe quickl....
Check Stock

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • ...o contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser cutter machine, the limit switch is automatically triggered to protect the laser and avoid collisions. The laser engraver will stop working immediately after pressing the emergency button to make engraving safer. Equipped with an all-aluminum alloy anodized structur....
Check Stock

Genmitsu CNC Router Machine PROVerXL 4030 for Wood Metal Acrylic MDF Carving Arts Crafts DIY Design, 3 Axis Milling Cutting Engraving Machine, Working Area 400 x 300 x 110mm (15.7''x11.8''x4.3'')

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock

Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic

  • 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient..
  • 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS).
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm....
Check Stock

xTool M1 5w Compact 3-in-1 Laser Engraver & Die Cutting Machine with Material Box, Higher Accuracy & Smarter 16MP Auto-Focus, Create Christmas DIY Wood/Metal/Paper/Acrylic/Iron-on/Vinyl, Home Decor

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting latest laser technology, xTool M1 laser engraver achieves True 5W output power, capable of cutting a 6mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system.
Check Stock

ATOMSTACK Laser Engraver Cutter A5 M50 by Alxeoider, Optical Power 5.5W Laser Engraver Machine, Diode 40w Laser Cutting Machine with 50mm Focal Length, Multi-Lens Beam for Wood/Acrylic/Metal Carving

  • ✅【ATOMSTACK A5 M50】 Newly upgraded laser head, cost-effective laser engraving machine.
  • ✅【Fixed-focus Laser + Compressed Laser】 The upgraded high-performance fixed-focus laser of laser engraving machine can engrave without focal length adjustment, more stable than zoom laser. The new laser focal spot area is 0.08 x 0.08mm, 50% smaller than other ordinary lasers, which can take into account both precision engraving and high-energy cutting. Adopts 4-fold lens group collimation focusing technology, the optical power of laser cutter and engraver machine is 5-5.5W, can easily cut 15mm thick wood board, 15mm black acrylic, etc., which can reach 100W CO₂ laser engraving machine effect..
  • ✅【Eye Protection Flame Retardant Filter Panorama Glass】 Flame retardant filter panorama glass can filter 97% of ultraviolet light, which has a good protection effect on your eyes. You and people around you can also clearly view the laser engraving without wearing protective goggles, reducing the cost of your goggles and the inconvenience of wearing goggles. At the same time, it can prevent your pet from going out curiously to capture the high-temperature laser point, whil....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock