Reviews Acrylic Laser Engraving

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • ...o contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser cutter machine, the limit switch is automatically triggered to protect the laser and avoid collisions. The laser engraver will stop working immediately after pressing the emergency button to make engraving safer. Equipped with an all-aluminum alloy anodized structur....
Check Stock

Csyidio 220PCS Engraving Material Box, DIY Materials Apply to All Laser Engravers with Instructions, Laser Engraving Supplies Including Acrylic Sheet, Metal Materials, Wood Materials

  • 【Laser Engraving Material Kit】 A total of 220 PCS of engraving material box are provided with abundant laser engraving test materials, which are made of 11 materials including glass, wood, metal, acrylic, rubber, leather, stone, ceramics, paper, felt, masking tape, to meet your needs for a variety of engraving materials.
  • 【Parameter Specification】 The instruction provides the recommended processing parameters for each laser engraving accessory in detail, controlling the time and power more accurately, to help you quickly obtain the desired carving effect.
  • 【High Quality】Every laser cutting material has gone through strict quality control, so it is of high quality to ensure the laser project goes smoothly.
  • 【Abundant Materials】 Enough items of different materials. You can create personalized designs of stainless steel hip flasks and tags.
  • Customized wooden and leather key rings and coasters.
  • Acrylic plates of different colors. Apply self-made products to daily life.
  • 【Enjoy the Fun of Laser DIY】Suitable for laser engraving beginners, novices ....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving Accuracy 0.01mm, Area(15.74\x16.14\)

  • First Choice for Creative: LATITOOL F50 laser engraving machine can engrave various materials like metal, wood, bamboo, plastic, leather PCB board, aluminum oxide, lacquered metal, etc. You can create your own engraved work for your favorites, realize your imagination..
  • Excellent Laser Engraving Technology: LATITOOL F50 laser cutter with 5~5.5w output power with 0.08mm ultra-fine compression laser focus area, the engraving accuracy reaches 0.01mm, which makes more refined engraving process, it makes easy cut on wood and acrylic..
  • 180° Panoramic Visible：UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing..
  • Solid & Easy Installation Structure Design: Industrial grade steel structure design makes the laser cutter and engraver machine more reliable and improves engraving accuracy. The entire engraver tool adopts a modular design, which is convenient for users to assemble, repair, replace and update laser engraving machine parts. And the assembly can generally be completed within 10-20 minutes..
  • Large carving Area: 400*410mm (15*16 inch) Large engraving range to meet various DIY....
Check Stock

Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic

  • 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient..
  • 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS).
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm....
Check Stock

KENTOKTOOL Laser Engraver, Laser Cutter with 10W Optical Power, Ultra-fine Compressed Spot Laser Engraving Machine with Touch Controller/APP Control

  • 【10W High Power Top Cutting Performance】The LE400 PLUS laser engraving machine is equipped with a true 10W output laser, which can cut 20mm wood and 10mm acrylic. The focusing range of the laser is reduced to 0.08mm and the precision is 0.01mm. The engraving speed is very fast, up to 300mm/s, and the working speed is 5-6 times faster than 5.5W laser..
  • 【Support Offline Engraving]】The newly upgraded offline control terminal supports mobile phone APP operation, so you can start laser engraving faster and more conveniently, set offline cache, and continue laser engraving even when mobile phone is off. You can also copy the files to engrave to the SD card and use the control panel to engrave anytime, anywhere without the limitation of a computer..
  • 【Innovative Eye Protection and Button Design】The laser engraving machine safety cover can filter 97% of ultraviolet rays and protect your eyes perfectly. The innovative magnetic protective cover can be loaded and unloaded at any time. The new knob design allows you to focus without tools, which is more convenient, faster and more stable than focusing without fixation. The dedicated 32-bit microprocessor motherboard can process engraving and cutting instructions faster and more efficiently..
Check Stock

ZBAITU C80 80W Laser Module Kit, 10W Optical Diode Laser Module for Engraver Cutter, 10W Laser Head for DIY Metal Wood Leather Acrylic Glass, Compatible Most Laser Engraving Cutting Machine, 12V

  • 【Wide Compatibility】The attached adapter cable and dovetail slider can help the ZBAITU C80-EAIR laser module to be compatible with most laser engraving and cutting machines on the market, also compatible with other machines that use 12V input voltage, you don't need to repurchase a laser engraving machine to improve engraving and cutting efficiency, high cost performance.
  • 【Air Assist】ZBAITU C80-EAIR Air assist laser module can blow away scrap and smog during engraving and cutting, boost effect, engraving and cutting more refined, reduces yellow smoky marks on the edges of the cutting line, the most important is to reduce the pollution to the lens to ensure the service life of the laser module.
  • 【High Power】The ZBAITU C80 EAIR laser engraving module has a 10W laser output power, it can quickly engrave metal, wood, leather, glass, and acrylic etc. The C80 EAIR laser cutting machine module is also excellent on cutting function, it can cutting 5mm plywood in one pass.
  • 【Ultra Accuracy】The newest FAC technology compresses the laser point of the ZBAITU C80 EAIR laser module to 0.08mm, the lines for engraving....
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Engraving Cutting Machine, High Energy Laser Cutter for 15mm Wood, 0.06mm Ultra-Fine Fixed-Focus Compressed Spot, Expandable Area

  • High Energy Cutting & Ultra-Fine Laser Beam – S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp compressed laser focus spot and 0.01mm engraving accuracy. With super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, 10mm plywood, engraving ceramics and stainless steel..
  • Safety Protection Design – Laser filter cover can filter 98% of UV light to protect your eyes, no need to wear goggles to watch laser engraving and prevent pets from catching the laser spot. Equipped with a power switch to easily turn on, or turn off the machine in case of emergency. A4 size steel pad protects the table from laser damage and isolates fire hazards..
  • Extensive Compatibility & Uses – Compatible various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Engraving materials: wood, paper, cardboard, plastic, PCB board, aluminum oxide, stainless steel, ceramic, stone, etc. Cutting material: wood, acrylic, plywood, fabric, bamboo, plastic board, etc..
  • Expandable Engraving Area & Quality Assura....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving

  • ...aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】 LATITOOL F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, and the engraving & cutting speed is faster than ordinary compressed light spot is increased by 60%, it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic....
Check Stock

SCULPFUN Laser Engraver Working Table,Laser Honeycomb Pad,Desktop Protection,11.81x7.87x2.17 in,for Laser Engraving Machine Cutter Tool Set

  • ... observable design】Laser Honeycomb Working Table contains a very convenient cutting and observing design. When the laser cuts through wood or acrylic, the metal backing plate at the bottom of the honeycomb panel will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether to cut through..
  • 【Necessary accessories for laser cutting]】Laser Honeycomb Working Table uses the laser cutting table to cut wood, acrylic and other materials. The edges of the wood are neat and clean, not easy to be yellowed by smoke, and a clean cutting work can be obtained..
  • 【Metal desktop protection board】Honeycomb Working Table is equipped with a metal desktop protection board, which can protect the table from laser damage. The Laser Protection Pad is very suitable for small DIY diode lasers..
  • 【High-quality workmanship with measuring ruler】The X-axis and Y-axis of the Laser Honeycomb Working Table contain precision scale lines to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraving. The Laser Protection Pad is made of metal and processed by high-precision CNC. The structure is firm, not easy to deform, and has high flatness....
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • ...y: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, support macbook system (LightBurn)..
Check Stock

20W Laser Engraver, MYSWEETY Laser Engraving Machine for Wood and Metal with 420 * 400mm Working Area, 5W Output Power Laser Engraver, Compressed Spot CNC Acrylic Leather Cutting

  • ✅ Advanced Technology: Adopt the most advanced beam compression technology, 0.08mm square ultra-fine focus laser, high-precision, smoother, faster than ordinary lasers. The new laser combined for precision engraving can directly engrave stainless steel, ceramics and glass (blackened glass surface).
  • ✅ Wide Software Compatibility: LaserGRBL and LightBurn, running on Windows XP, 7, 8, 10, also support Mac system. Engraving file format supports: JPG, DXF, SVG, G-code, NC, BMP, etc.
  • ✅ New Eye Protection Design: The engraver with protective cover can filter 98% of the harmful rays. Visible laser protection cover bothperfectly protects your eyes and lets you see where the laser focus is, more convenient and safer.
  • ✅ Strong & Easy to Install: All-metal structure laser engraving machine, strong and durable, making the laser movement more stable and has an accuracy of up to 0.01mm. Installation is easy and can be completed in 30 minutes. The engraving speed can reach 10000mm/min and the lifespan can reach 25000 hours. Both the X-axis and Y-axis have precise scale lines so you can quickly measure material.
  • ✅ Wide Application: Our laser engraving machine can engrave almost any object, includes wood, acrylic, glass, stainless steel, ceramic, stone, foo....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

  • ...CB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks produci....
Check Stock

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

  • ...mperature smoke generated during laser operation through the unique air duct built into the laser module, which helps to engrave more delicate models. You can use the roller to engrave objects with diameters from 2mm-150mm, such as goblets, skateboards, pencils, etc.
  • 【Stability and Efficiency】The Atezr P10 laser engraving machine is made of high-density aluminum alloy. It can ensure engraving accuracy and stability even at a high speed of 24,800mm/min, and save nearly 40%-80% of working time. The engraving area of Atezr P10 engraving machine is increased to 430mm*430mm, which can engrave larger materials.
  • 【Powerful Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
  • 【Multiple Connection Modes】ATZER laser cutting machine has 4 connection modes. You can not only connect to PC, mobile phone/tablet APP, but also connect to touch screen and WLAN. You can download APP from App Store/Google Play Store and use your mobile ....
Check Stock