Reviews Adjustable Depth Stop Taps

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ...gth, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

Smart-Bit Screw Depth Setting Tool

  • Once target depth is reached, the Auto-Stop mechanism inside the tool disengages the driver bit.
  • Adjustable depth allows you to choose the depth needed for your job.
  • Stop collar's rubber O-ring prevents the tool from damaging the deck surface.
  • Perfect for decks and drywall - Works with star drive and Phillips drive bits.
Check Stock

SKIL 6.2 Amp 10 In 5-Speed Benchtop Drill Press with Laser Alignment & Work Light - DP9505-00

  • POWERFUL 6.2 AMP INDUCTION MOTOR—Power through wood, metal, and other materials.
  • 5-SPEED SYSTEM—Take advantage of 5 speeds from 610 to 2800 RPM for different material types.
  • LASER ALIGNMENT SYSTEM—Precisely execute drilling maneuvers.
  • ADJUSTABLE DEPTH STOP—Ensures accurate and consistent depth during drilling.
  • ADJUSTABLE TABLE HEIGHT—Provides easy depth control.
Check Stock

Hammerhead 10-Amp Variable Speed Plunge Woodworking Router Kit with Parallel Guide and Vacuum Adaptor – HAPR100

  • Variable Speed - Control dial to provide variable speeds for different applications.
  • Fast Micro-fine Bit-depth Adjustment - Simple and accurate at any plunge setting.
  • Adjustable Turret Stop – Control bit-depth range by adjusting turret stop.
  • Integrated Spindle Lock, Wrench on Board - For fast router bit changes.
  • Vacuum Adaptor - Connect to vacuum or shop vac to keep a clean workspace.
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ...ad (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

Kegtron Smart Keg Monitor - Single Tap | Track Your Keg Levels From Your Phone | Upgrade Your Taps

  • UPGRADE YOUR TAPS – Wirelessly monitor your kegerator or taps at the bar.
  • ALL ON YOUR PHONE – Monitor all of your kegs from your phone or tablet.
  • STOP THE GUESSWORK – Don’t be surprised by empty kegs. Track volume served, volume remaining, servings remaining and more.
  • QUICK AND EASY – Install it yourself quickly and clean-in-place with your beverage lines.
  • EXPANDABLE – Add expansion monitors to grow as needed. Works with small kegerators to large bars & restaurants.
Check Stock

Makita 2414DB 14'' Cut-Off Saw, with AC/DC Switch

  • Lock-off button to prevent accidental starting.
  • Guide plate adjusts 45° right and left - 3 locations for various sizes of materials.
  • Quick release vise for secure stock retention and fast repeated cut-offs.
  • Adjustable depth stop for precise, repeatable cutting depth.
Check Stock

General Tools 36/37 Precision Drill Guide For 3/8-Inch or 1/2-Inch Power Drills, Portable & Lightweight, Folds Flat for Storage, Silver

  • BUILT IN PROTRACTOR- drills accurate right-angled or variable-angled holes with the built-in protractor scale.
  • ADJUSTABLE- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position.
  • POSITIVE STOP- built-in depth stop for accurate drill depth.
  • WORKS WITH DOWELS- v-groove for positioning round stock, pipe or tubing. A slide lock facilitates sanding and buffing.
  • STABLE- anchoring pins to hold the guide securely in place on flat surfaces, narrow edges or large tubing.
Check Stock

Drones: The Professional Drone Pilot's Manual

  • Adjustable 1080P Ultra Clear Camera: 1080P HD camera (angle 80°adjustable) plus smooth FPV Real-Time transmission equals to the enlargement of your horizon! Capture the beauty and vastness of the world with great ease in remarkable detail with 1920*1080 photos..
  • User Friendly: Multiple intelligent flying modes and features like One-Key Takeoff/landing, Headless Mode, Auto Hovering, Emergency Stop, Gravity Sensor are for the beginners. This RC Quadcopter is great for novice..
  • Fly without Endurance Anxiety: the package is coming with 2 modular batteries.
  • it only takes you 70 minutes to fully charge the battery..
  • Flying just like Gameplay: A few taps on HS FPV V4 app opens up a wonderful new world of flying: freely draw the fly route on the screen (trajectory flight), make the drone response to your voice commands (voice control), trigger the drone's camera by raising up your palm or making a V-sign (gesture selfie), control the fly direction by simply tilting your phone (gravity sensor mode)..
  • Foldable Design and Lightweight: Weighing less than 0.34lbs, HS280 is almost as light as t....
Check Stock

TECHTONGDA Hinge Boring Drill Press Machine Woodworking Wood Hole Puncher Cutter 3Z-48-6

  • ...control the drilling depth without damaging the drill bit, with nylon inner ring, can effectively avoid the wear of the locked part of the drill bit, and at the same time make the drill bit easier to lock, suitable for repeated use in the woodworking industry..
  • 【Aperture Adjustable】Adjustable drill bits with two different specifications of inner diameter range, large bit width 15/64"-7/16" (0.23"-0.43"), small bit width 5/64"-3/16" (0.078"-0.18")..
  • 【Precise Drilling Depth】Easy to adjust, the limiter can precisely control the drilling depth, making woodworking more convenient and efficient. Please tighten the drill plug when using it to ensure accurate entry to the desired depth..
  • 【Wide range of applications】: The drilling stopper is suitable for furniture installation, ordinary tiles, wood, metal, plastic and bricks and other scenarios. The package contains 2 metal aluminum stop drill rings and two nylon inner rings, metal outer ring size - small: 30-34mmx20mm*1 large: 49-54mmx28mm*1..
Check Stock

DEWALT Plungle Router, 15 AMP, Corded (DWE625)

  • PROFESSIONAL-GRADE MOTOR: Achieve a quality finish and smooth routing with a powerful 15 Amp motor.
  • FAST AND PRECISE DEPTH ADJUSTMENTS: Micro-fine depth stop adjuster, 3-stage adjustable turret along with micro-fine height adjustment for quick and accurate setup.
  • QUICKLY MATCH THE SPEED TO THE APPLICATION: 9,000 - 22,000 no-load RPM with the variable speed dial.
  • SINGLE-WRENCH BIT CHANGES with spindle lock button.
  • ACCOMMODATE A WIDE VARIETY OF ROUTER BITS: Includes 1/4 in. and 1/2 in. collets.
Check Stock

J&R Quality Tools 40-Piece Titanium Coated Tap & Hexagon Die Set - Metric

  • Includes both fine and coarse threaded taps and die in Metric sizing..
  • Complete with compact custom fit latched ABS storage and carry case to protect and organize..
  • M3 to M12 taps and hexagon die with thread pitch from 0.5mm to 1.75mm.
  • Professional grade set of Titanium over alloy steel for superior cutting power without brittleness..
  • Adjustable and T-Handle tap wrenches, adjustable die wrench, screwdriver, thread pitch gauge..
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock