Standard Gage 00524103 Value Micrometer and Caliper Set (Black Face)
- Set includes a 0 to 1" external micrometer, 0 to 6" dial calipers, and a depth measuring base for making precision measurements.
- Micrometer has 0.0001" graduations and precision of 0.00016".
- Dial calipers have a black-face dial indicator with 0.001" graduation increments and 0.100" travel per revolution.
- T-bar depth measuring base attaches to the dial calipers to aid measurement of holes and recesses.
Check StockLyman Pro Micrometer Seating Die - 9mm, Stainless Steel
- Our Micrometer Seating Die gives you exact bullet seating length and minimal run-out.
- Has a micrometer adjustable seating head for precision bullet seating length.
- If you want to change your bullet seating depth a few thousandths of an inch, simply turn the micrometer head to the required setting.
- Its floating bullet seating punch centers the bullet on the case and eliminates excessive run-out.
- Made of corrosion resistant stainless steel which protects it from rust and keeps it looking like new for a lifetime of use.
Check StockMahr Federal EGH-1028 Surface Analyzer Groove Bottom Probe, 10-Micrometer Radius
- For use with Mahr Pocket Surf series portable surface roughness gauge (sold separately).
- Groove-bottom probe for gauging recesses with maximum depth of 6.35mm (0.25").
- 90-degree conical diamond stylus for two-dimensional tracing.
- 10 micrometer (0.0004") radius stylus for use with rough surfaces.
- Measures average roughness (Ra), mean depth (Rz), and maximum depth (Rmax) parameters.
Check StockINSIZE 5013-E Measuring Tool Set, 13 Piece
- Includes: Electronic caliper, range 06-"/0-150mm, resolution . 0005"/0. 01mm (1108-150).
- Outside micrometer, range 0-1", graduation . 0001" (3202-1).
- Dial indicator, range 1", graduation . 001" (2307-1). Magnetic stand (6201-60).
- Protractor, range 0-180°, graduation 1° (4799-180). Pitch gauge, range 4-42TPI, 30pcs, unified 60° thread (4820-230).
- Radius gauge, range 1/32"-1/4" (4801-15E). Feeler gauge, range . 0015-. 035", 31pcs (4608-31).
- 90° bevelled edge square, 3. 937x2. 756", grade 0 (4790-1000). Scriber (7230).
- Zero setting bar for depth base attachment..
Check StockKynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm
- 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
- 【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
- accuracy to ±0.001”/0.02mm and resolution to....
- 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
- 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
- 【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....
Check StockLuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture
- Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
- Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
- Micrometer Holder Stand fit for most inside and outside micrometers..
- Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
- Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..
Check Stock50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring
- STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
- HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
- VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
- CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
- MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..
Check StockMini Micrometer 10mm Small Micrometer Pocket Size Metric 0-10mm x 0.01mm
- A MINIATURE Pocket size Micrometer only weighs 1.35oz..
Check StockFrankford Arsenal Universal Bullet Seating Die for .224 to .338 Caliber with Micrometer Stem and Storage Case for Reloading, Black
- CONVENIENT: Experience precise micro-adjustments to the seater depth of the bullet with a built-in micrometer.
- EASE OF USE: Holds bullet in place while seating and has an adjustable seating depth.
- VERSATILE: Works for .224 - .338 cal and has a standard 7/8 x 14 thread.
- DESIGN: One alignment sleeve and VLD bullet seating stem are preassembled in the die.
- INCLUDES: 9 Bullet alignment sleeves, 3 VLD bullet seating stems and a molded storage case.
Check StockFowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range
- Micrometer Head: For general purpose measuring applications.
- carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
- Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
- Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
- meets IP54 specifications for dust and water protection.
- Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
- Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check StockFowler 54-225-456-0, IP54 Digital Depth Micrometer with 0-6\/150mm Measuring Range
- Depth Gauge: Features an automatic switch off, an LCD display, friction thimble, microlapped 4” base for repeatable and accurate readings, six interchangeable rods for providing rapid measurement of hole depths, and an electronic counter.
- Precision Measurements: Features a 0-6"/150mm range, a resolution of 0.00005"/0.001mm, and accuracy of 0.00016″/0.004mm.
- Rod Extensions: Six rods included, all with a diameter of 0.176".
- Durable Material: Features a base constructed of hardened and ground tool steel to ensure long wear and continuing accuracy.
- Set Includes: A depth micrometer with an LCD that displays in inch/metric and is water resistant to Ingress Protection 54 (IP54) standards with six extension rods and a fitted case.
Check StockMetric Micrometer
- 【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
- 【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
- 【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
- 【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
- 【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....
Check StockStarrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series
- The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
- The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
- The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
- Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check Stock
