Reviews Adhesive Paste Epoxy

50Pack Industrial Dispensing Needle Accessories Plastic Syringes 18ga Needles

  • Scope of application: Vinyl Paint Alcohol Clear Water Silicone Silver Paste Ink Yellow Glue Silicone Lubricant Solder Paste Damping Oil SMT Red Glue UV Glue Fast Glue Crystal Glue Glass Glue Heat Cream Trumpet Glue Anti-friction Screw Adhesive Marking Paint Chemical Reagent Epoxy Resin Electrolysis Liquid magnetic fluid oil and so on.
  • Package Dimensions: ?3.74 L x 3.43 W x 1.97 H inches.
Check Stock

System Three SculpWood Paste Epoxy Wood Filler, 0.5 Gallon Kit

  • Premium Epoxy: SculpWood Paste is a smooth, creamy 2-part epoxy finishing paste compound that's compatible with most water/solvent-based primers and paints.
  • Easy To Apply: Spread our Sculpwood epoxy paste evenly over the surface, slightly overfilling voids and cracks to ensure sufficient material is available for sanding.
  • Versatile Application: Excellent companion for SculpWood Putty when filling cracks and repairing small defects.
  • Wood filler can be used as a standalone product for exterior architectural repairs such as filling cracks, dings, or nail and screw holes.
  • Fast Curing: At 70°F, SculpWood Paste reaches a sandable state in 6-8 hours.
  • Once the wood filler reaches this state, it can be coated with primer and paint.
  • Tips and Tricks: Cold temperatures extend the cure time of this waterproof epoxy wood filler, while warmer temperatures reduce the cure time.
Check Stock

HTVRONT White Resin Pigment Paste - 1.76oz/50ml White Epoxy Dye Pigment, Higher Concentrated & Easy to Mix White Epoxy Pigment for Resin Coloring, Ocean Waves and Water Effects

  • 【White Resin Pigment Paste】If you want opaque color effect for your resin, this epoxy dye pigment is your best choice. You will get your project with bright opaque white and no mess. Each white resin dye is 1.76oz/50ml, large capacity allows for a lot of wildest creations and never run short of creativity. Why not making some creative crafts to your families and friends with our white pigment for resin?.
  • 【Higher Concentrated & Easy to Mix】A little epoxy dye goes a long way. This resin pigment paste is more pigmented than resin pigment liquids, easy to diffuse in the resin with saturated color and uniform gloss, just need one drop and you will be shocked by the color effect, also never worry about fade problem. In order to curing normally, dye added should less than 5% by weight of the entire project for large projects, and below 1% of the entire project weight for small one..
  • ✨【Easy to Use & Leak-proof Design】The white epoxy dye pigment requires no preparation and is ready to use. White epoxy resin pigment with specially designed sharp mouth squeeze bottle, make it easier to control your drops until you achieve your desired color, so that you c....
Check Stock

PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 32 oz in Two Jars, Gray 73209

  • Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonry.
  • Resists moisture and can be applied to both wet and dry surfaces.
  • Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F.
  • Non-sagging paste can be used on horizontal and overhead surfaces.
  • Can be painted, stained, and machined after fully cured.
Check Stock

PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 8 oz in Two Cans, Gray 70079

  • Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonry.
  • Resists moisture and can be applied to both wet and dry surfaces.
  • Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F.
  • Non-sagging paste can be used on horizontal and overhead surfaces.
  • Can be painted, stained, and machined after fully cured.
Check Stock

PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114

  • Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments.
  • Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber.
  • Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F.
  • High-tack paste can be used in vertical and overhead applications.
  • Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water.
Check Stock

PC-Products PC-11 Epoxy Adhesive Paste Two-Part Marine Grade 1/2lb in Two Cans Off White 80115

  • Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments.
  • Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber.
  • Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F.
  • High-tack paste can be used in vertical and overhead applications.
  • Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water.
Check Stock

PC Products PC-Concrete Epoxy Adhesive Paste for Anchoring and Crack Repair, Two-Part 102 oz in Two Pails, Gray 71021

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

PC Products 70086 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 1.4 oz in Applicator Syringe, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

PC Products PC-AutoBond Epoxy Adhesive Paste, 1oz Double Syringe, Metallic Gray 81112

  • Cold weld epoxy adhesive paste to bond metal, rubber, fiberglass, and glass in automotive applications.
  • Forms a tough bond that flexes to provide impact and vibration resistance.
  • Continuous service temperature range from -20 to +250 degrees F.
  • Provides work time of 8 minutes and full cure time of 12 to 24 hours (at 75 degrees F).
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (30') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

DRICORE PRO Concrete Repair High Strength Anchoring Epoxy Paste (6 Pack) | Fast Curing, Extra Strength - for Repairing Cracks and Signs of Cracking in Foundations, Walls, Basements, Pools, Cement

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

Benoit/Freeman Project

  • ✅ HIGHLY PIGMENTED RESIN PASTE– Eye Candy Pigments brings you top quality epoxy resin pigment pastes. If you are familiar with our quality white mica pigment powders, you will not be disappointed with these pigment pastes. Due to our high pigmented formula, you will only need a small amount of Satori White to achieve the cells and solid white color that you desire..
  • ✅ ULTIMATE CELLS AND LACING – 3 oz of white pigment paste! Packaged in a 4 oz jar to prevent mess and spillage. Over double the amount of white pigment paste compared to other brands. PERFECT for the creation of cells and lacing in those beach themed resin art projects! Use very little for a transparent look, use a little bit more for an opaque look..
  • ✅ MADE IN THE U.S.A– Eye Candy Pigment Pastes are formulated, manufactured, and packaged in the USA. Our pigment colors specifically designed with the epoxy resin artists and woodworkers in mind. No prep is required, easy to diffuse and ready to use..
  • ✅ ULTRA-FINE PURITY – Eye Candy Pigment products are of 100% highest quality. Our pigment pastes blend with ease and perfectly suited to work with epoxy resins and mica pigments. Eye Candy Pigment Pastes can be mixed with our mica pigments to achieve customized colors..
Check Stock