Reviews Access Power Supply

ciciglow Power Supply Box Backup Battery Port for Home Office Door Access Security System, AC90‑260V to DC12V 5A

  • The power supply controller adopts international advanced technology and specialized in the access control device power supply,it has the features of wide voltage range, low power consumption, stable performance, no noise, low heat, long life, etc..
  • The power supply controller mainly supports electronic lock, access control controller, magnetic lock, electric plug lock, door button, wireless remote control, doorbell, building intercom system and other functions..
  • The power supply controller adopts metal shell, improving the safety of users and enhancing the safety of extrusion, electricity, signal, fire safety, and side cooling hole design is suitable for building intercom and all kinds of entrance and exit acces.
  • The installation process of the power supply controller is simple, and it can be used normally as long as the wiring is shown..
  • This power supply controller is equipped with a delay circuit, and the unlocking time can be adjusted freely within 0‑15 seconds, and AC input is 90V‑260V, the DC output is DC12V 5A. When the output terminal is short‑circuited, the automatic protection function is activated, especially when the power supply is short‑circuited, the power supply may be temporarily disconnected or the fuse will be automatically di....
Check Stock

Schlage Electronics PS902-2RS Class 2 Power Supply with 2 Relay Output Board

  • Ultra High Output Power:All-copper high-frequency transformer, large output power, can meet one access control controller, 2 electric plug locks or 2 280 kg magnetic locks work at the same time..
  • Quality Material:This access control has an aluminum alloy casing that is rugged, shielded and resistant to interference. The rear of the power supply has a lifting hole that can be placed on the antenna board or hung on the wall..
  • Good Heat Dissipation:This access control power supply has cooling holes, and the side is also equipped with cooling holes, which hae excellent heat dissipation performance, but also fireproof, long serice life and low price. You will not regret it when you buy it back!.
  • high leel, low leel, switching quantity control three ways. Circuit protection: oercurrent, oeroltage, short circuit protection.
  • Buy With Total Confidence:We proide 1 month free return and exchange serice. If you find any quality problems during this period, except for man-made damage, you can contact us and we will gie you one within 24 hours.....
Check Stock

BSTUOKEY Access Control Power Supply Transformer Door Supplier Adapter Covertor System Machine DC 12V 3A 5A AC 110~240V (12V 5A Version)

  • FEATURE-- Using pulse width modulation (PWM) type, full regulated access control power supply.
  • WITH DELAY POWER OFF FUNCTION-- Constant voltage 12V output with delay power off function.
  • APPLICATION-- The power supply box is suitable for access control systems.
  • EASY INSTALLATION-- Adopt vertical installation method, easy to install and remove.
  • WITH NATURAL COOLING METHOD-- With natural cooling method, does not easily damage the access control.
Check Stock

Unlocked Mini 4G Dongle USB LTE Ufi Mobile Data Wireless Router Network Card WiFi Hotspot Modem dongle with Sim Card Slot

  • 4G WIFI Dongle - Support multiple 4G networks, internet sharing up to 10 wifi users. Powered by devices with USB port, such as phone charger. car charger, power bank..
  • Plug & play, Enjoy 4G network - Convenient USB power supply mode. connect power supply devices, insert the SIM Card, using sim data to surf the Internet anytime and anywhere..
  • Support Multi-terminal Access Internet at the Same Time - Support 10 devices:mobile phone,i Pad,laptop, computer, smart TV and other devices to access the Internet..
  • Fast & Stable High-speed Internet Access - High speed rate 4G network,stable signal,feel wonderful network life, Fast access to the Internet..
  • Multiple Protection, More Safety - Using WPA/WPA2 WiFi encryption,high level wireless work security, effectively avoid network squatter, support data control..
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock

MakerHawk Electronic Load Tester - USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Dischar

  • Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
  • Two power supply methods: 1. DC6-12V DC5.0 power supply.
  • 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
  • Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
  • How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
  • 2. Fast button twice capacity reset (mAh).
  • 4. Fast button Four time reset (00:00:00).
  • 5. Fast button five settings auto standby, Discharge count down regularly.
  • 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
  • 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x curre....
Check Stock

MakerHawk Electronic Load Tester USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Discharge Resistance Power Tester

  • Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
  • Two power supply methods: 1. DC6-12V DC5.0 power supply.
  • 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
  • Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
  • How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
  • 2. Fast button twice capacity reset (mAh).
  • 4. Fast button Four time reset (00:00:00).
  • 5. Fast button five settings auto standby, Discharge count down regularly.
  • 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
  • 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x curre....
Check Stock

New AyrMesh Hub2x2

  • High Power, Long-Range Meshing WiFi Access Point..
  • Range: up to 400 yards to a smartphone, 1000 yards to a laptop, 2.5 miles to another Hub2.
  • Includes Power Supply and 2 10' Ethernet Cables.
  • Requires an Ethernet Cable between the Power Supply and the Hub.
Check Stock

HFeng Door Access Control System Kit IP68 RFID Keypad Waterproof Outdoor + 180KG/320lbs Electromagnetic Electric Magnetic Lock + DC12V 3A Power Supply + 10pcs Keyfobs Tags Door Entry System

  • 1. Working with DC12V power supply system. Very easy to install. Don't need to connect to computer..
  • 2. Made of high quality, the access control keypad is IP65 waterproof, can be used outside. Has a WG26 interface and door bell button..
  • 3. Support 2000 user capacity. Can open the door with RFID key cards, password, RFID key card+password..
  • 4. Suitable for wooden door, metal door, glass door. Locked when power on, unlocked when power off..
  • 5. Package including access control keypad + power supply + 180KG electric magnetic lock + door exit button +10pcs Keyfobs..
Check Stock

AMOCAM K80 Power Supply Control, AC 110-240V to DC 12V Power Supply for Door Access Control System, Video Doorbell, Electric Strike Lock, Bolt Lock, Magnetic Lock, Power Supply Controller

  • This power supply is small, easy to install and easy to use, the input voltage range from 100V-240V to normal use, suitable for all countries of the world..
  • Power supply for door access control is a transformer which provides stable output voltage for access controller, electric lock, and exit button..
  • Set NC / NO outputs, can control various types of electric locks, Based delay control circuit, lock time can be in 0-15 seconds..
  • Compact design and light weight, Short-circuit and overload protection for safety use, Can control various types of electic gate lock, electric strike lock, electic bolt lock, magnetic lock..
  • The scope of application of the power applied to a variety of building intercom, villa doorbell, aparment doorphone, home video door phone controller, access a variety of import and export controls..
Check Stock

MokerLink PoE Switch, 4 Port PoE+, and 8 Port PoE+, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • Include POE-F042F (4 PoE+ Port, 2 Uplink, 100Mbps), and POE-F082GD ( 8 PoE+ Port 100Mbps, 2 Gigabit Uplink).
  • Built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W..
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

Huacomm 8 Port PoE Switch with Full PoE+ Ports Plug-and-Play Desktop for IP Camera Access Points IP Phone Metal Housing Ethernet Extended Unmanaged IEEE 802.3af/at 96W HC1709P

  • The new and powerful upgrade for HC1709P: Power consumption upgrade from 65W to 96W + Human oriented design of power usage + Build-in power supply..
  • 8 PoE+ Ports plus 1 Uplink Port 10/100Mbps PoE Switch, Supports PoE power up to 30W for each PoE port, 96W for all PoE ports, full IEEE802.3af/at....
  • Security&Reliable. Smart PoE Power Supply, automatically identification, never destroy the front equipment. One-by-one port start function, avoid....
  • This PoE switch is ideal for powering PoE devices such as IP cameras, WLAN access points, IP phones, offices, office access control systems, and other....
  • LIMITED LIFETIME WARRANTY and 24/7 Technical Support..
Check Stock

Cudy 8 Port PoE+ Switch with 2 Uplink Ports 120W, 8 10/100Mbps PoE+@120W, Extend/VLAN Mode, 802.3af, 802.3at Standard, Fanless, Watchdog, Plug and Play FS1010P

  • Reliable 10/100Mbps IEEE 802.3af/802.3at compliant PoE+ switch with 120W total PoE Power supply. Ideal for small installations of 8 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)..
  • PD Detect and Port Power Prioritization: PD Detect Auto-sensing technology delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices. Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • VLAN mode support isolate 8 PoE+ port from each other. It is easy to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock