Reviews External Power Supply

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 4000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • Support charge while discharge: It will not affect the output of UPS power supply when external power outage. Note: If you use UPS to supply power for Raspberry Pi3b/3B+ when it is charging, please ensure that the input power is not lower than 2.5A. Recommended Use: 3V 2.5A power supply. ★Document link and Assemble video: Please get the link from the product description below.
  • Two power modes: Outdoor portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm.
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Char....
Check Stock

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

  • ...This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
  • Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
Check Stock

MIDI 2x2 USB MIDI interface

  • Inputs: 2 MIDI inputs (32 MIDI channels) Outputs: 2 MIDI outputs (32 MIDI channels) Power supply: USB Powered, no external power required.
  • Power supply: USB Powered, no external power required Operating Systems: Mac OSX, Windows XP and above (no driver needed).
Check Stock

MyVolts 12V Power Supply Adaptor Compatible with Western Digital WD10000H1U-00 External Hard Drive - US Plug

  • This 12V high-quality power supply adapter serves as a replacement PSU for the Western Digital WD10000H1U-00 External hard drive. The adaptor features overvoltage, overcurrent and short circuit protection to protect it from damage..
  • Package Includes: - US 12V power supply adaptor.
  • This is a fixed voltage 12V power supply adaptor designed to meet exactly the power specification of your device..
  • Lifetime warranty - this power supply comes with a warranty covering up to the lifetime of your device, or 10 years - whichever is greater. Energy efficient - this power supply is Energy Star level 5 approved, guaranteeing more efficient delivery of power to your devices, at less cost to you..
  • Also compatible with: Western Digital External hard drive WD3200H1U-00, WD5000H1CS-00, WD5000H1U-00, WD6400H1U-00, WDBAAF5000EBK-01, WDBAAU0010HBK-01, WDBAAU0015HBK-01, WDBAAU0020HBK-01, WDBACW0020HBK-01.
Check Stock

HDMI Cable for N64, N64 to HDMI Converter with HDMI Cable , Compatible N64/GameCube/SNES Game Console

  • N64 to hdmi Converter : Converts N64 Game machine input video signal to HDMI video signal output, No Transmission Loss! Displayed on TV or monitor that supports HDMI input.
  • N64 to HDMI: No setting and Easy to Install and Operate,. Just simply hook it up the N64 and plug the HDMI directly into the tv. Powered by External USB Cable..
  • N64 To HDMI Adapter only support compatible N64、SNES、Game Cube game consoles (Does not support other game consoles ).
  • Powered: Converter needs external power supply to work properly, so please ensure stable power supply during your use..Please check whether the converter has been connected to 5V1A power supply（Power supply not included）. (a USB power cable without power supply was given as a present)..
  • You Will Get : 1x N64 To HDMI Converter, 1xHDMI cable, 1xUSB cable, 1xUser Manual. ONE YEAR WARRANTY – if you are not satisfied for any reason whatsoever, do not hesitate to contact us ..
Check Stock

TP-Link N150 Wireless 3G/4G Portable Router with Access Point/WISP/Router Modes (TL-MR3020)

  • Interface: 1 10/100Mbps WAN/LAN Port, USB 2.0 Port for 3G modem, a mini USB Port for power supply.
  • Button: Quick Setup Security Button, Reset Button, Mode Switch.
  • Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b.
  • Ships in Certified Frustration Free Packaging.
  • Compatible with Select ATT/Verizon/Sprint/T Mobile USB Modems.
  • Industry leading 2 year warranty and unlimited technical support.
Check Stock

2019 Hub Dock for Nintendo Switch Dock, Switch USB Hub for Nintendo Switch with 4 Output Ports for Wired Pro Controllers, Keyboard, Joy-Con Dock, Switch Controller Adapter, Mobile Phone, etc

  • ...er it will take the power from the usb charger and not the switch so you can have 4 wired controllers with rumble on with no problems. It also can charge your mobile phone such as galaxy s9..
  • 【KEEP SWITCH DOCK MORE STEADY】 – The original Nintendo Switch dock will be placed more steady once it is installed. The external power interface adopts the design of Micro USB interface, which is more convenient for users to match the power supply..
  • 【WARM TIPS】 – If the current of external equipment≤1.4A, do not need to use an external power supply. If the current of external equipment≥1.4A, or use 3 or more than 3 controllers at the same time. Need to use the external power supply. Do not use the power adapter with voltage over 5.3V..
Check Stock

Intona 7055-B USB 2.0 Hi-Speed Isolator 5kVrms 20kV ESD Protection

  • No external power supply required. External power can be connected to supply up to 2000mA.
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 1kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (< 1 µV RMS @ 22 kHz BW).
Check Stock

MOKOSE 4K Digital Camera 3' Screen 3840 * 2160/30FPS HDMI 1080P USB Webcam Support NP-F980 F970 F960 External Battery and 3.5MM Microphone with 10-55MM Telephoto Zoom Manual Lens

  • .../25/24fps ,1080P60/50/30/25fps, 1080i60/50, 720P60fps HDMI output，Connect to a HDMI monitor capture video show on screen for teaching, or Connect to a HDMI video capture card for small activity Live Streaming..
  • The camera has a built-in microphone. In order to obtain better audio, the camera can also connect to an external independent microphone, and can connect a wireless microphone to capture audio from a long distance..
  • The C200 4K Digital Camera adopts an interchangeable lens design and using a CS/C mount lens . A large number of industrial lens groups enable the C200 4K Digital Camera to be widely used in industrial scenarios..
  • There are three power supply methods, （1）DC 12V power adapter power supply, （2）USB 5V power supply ，（3） External battery power supply，Support external battery （ Mode: NP-F980 F970 F960 F770 F750 F550） *This item not include battery. Solid aluminum shell material ,1/4 Inch Screw Thread placement easier for multi-angels placement needs . Field of View: 7.5-29.5°.
Check Stock

KFD AC Adapter 24V for Resmed S10 Series 370001 ResMed Airsense 10 AirCurve 10 Series CPAP and BiPAP Machines;Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970

  • ...et, AirSense 10 AutoSet for Her, etc.).
  • All AirCurve 10 BiLevel Machines (AirCurve 10 S, AirCurve 10 ST, AirCurve 10 VAuto, AirCurve 10 ASV, etc.).
  • All Resmed Lumis VPAP series BiLevel Machines (Lumis 100 VPAP S,Lumis 150 VPAP ST BiLevel Machines ). Replacement for Resmed CPAP Machines External 90 Watt Power Supply Resmed S10 370001+24V 3.75A 90W Resmed Airsense 10 Power Cord air sense 10 power supply airsense 10 power cord resmed cpap supplies.
  • Also Compatible Models: Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines, Resmed S9 Series CPAP and BiPAP Machines: Resmed S9 AutoSet / S9 AutoSet for Her /S9 Elite / S9 Escape Auto / S9 Escape / S9 VPAP Auto / S9 VPAP Adap / S9 VPAP S / ST /S9 VPAP Tx.
  • Replacement 90-Watt ResMed S9 Power Supply Model No. 369102 36821 External Power Supply.
  • Also Replacement ResMed 30W IPX0 IPXO R360-761 (WA-30A24UGKN) +24V 1.25A 3 Pin Connector Power Supply External 30 Watt Power Supply for ResMed S9 Machines.
Check Stock

Kensington SD3600 Universal Dual Display USB-A Docking Station for Windows, MacBooks and Surface (K33991WW)

  • ...oks (Mac OS version 10 14 and later) with a USB-C to USB-A adapter.
  • 2 SuperSpeed USB 3 0 Ports (backwards compatible to USB 2 0) that support high-speed data transfer up to 5Gbps and phone charging 4 USB 2 0 Ports for peripherals like a keyboard and Mouse printers and other accessories Gigabit (10/100/1000) ethernet external headphone and microphone jacks with audio 2 0 for enhanced sound quality.
  • Dual Display resolution of up to 2048x1152@60Hz including 1080P video via HDMI and DVI Single display resolution of up to 2560x1600 @60Hz (including QHD 2560x1440) via HDMI add a third monitor using a USB-A to DVI Display Link adapter (Kensington part #K33974AM or similar).
  • DVI-to-VGA and DVI-to-HDMI adapters included for greater monitor compatibility power supply included to power the dock and all the ports (does not supply power to a laptop).
  • Power supply included to power the dock and all the ports (does not supply power to a laptop) Vesa mountable (see Kensington mounting bracket part #K34050WW) Kensington lock slot (see part#K65035AM for compatible lock) for Macbooks download the latest Display Link drivers from the Display link website.
  • Dual 1080p HD video to external monitor via HDMI, VGA or DVI.
  • 2 front USB 3.0 ports that support high-speed data....
Check Stock

CABLEDECONN Multiport 4-in-1 HDMI to HDMI/DVI/VGA Adapter Cable with Audio Output Converter Black

  • Multifunction HDMI splitter converter cable with audio output, supports HDMI/DVI/vagal(sold separately) output simultaneously to enjoy your favorite movies, YouTube clips, iTunes songs and movies.
  • Lightweight and portable adapter allows you to display content on your HDTV, monitor, computer, tablet, projector and other devices with HDMI or DVI or VGA to HDMI connector. Note: This adapter that you can only connect one monitor at a time, A separated HDMI/DVI/VGA cable is required.
  • Transmit both Audio and video from computer or tablet to HD display with audio out via HDMI. Support video resolutions up to 1920x1080 and 1080P (Full HD) and flawless Audio pass-thru. But if connecting VGA, Please connect 3.5mm Audio jack from our adapters to your external speakers to get sound, If connecting DVI, Please connect from your input devices' Audio port to your external audio devices to get sound..
  • Support external power supply. When connect high power devices or the device is in low battery, you could connect external power supply via Micro b-5v power port to charge your adapter.
  • Hemi connectors resist corrosion, provide rigidity, and improve the signal performance. Easily display and share your videos, photos, games and more from your devices on any screen.
Check Stock