Reviews A Generating Chip

Othmro 5Pcs 35mm Dia LED Chip Bulb Super Bright High Power 15-17V 6500K 5730 Aluminum LED Bulb Surface Mounted Devices Light Beads,Floodlight for Camper Light Bulb Home Reading Light Marine Lamps

  • 【Material】-This LED Chip Bulb is made of high quality Auminum board, durable for daily use,low heat generating.
  • 【Advantage】-The LED light Panel has low consumption,high brightness,high Power LED,saving power,very low heat generating.
  • 【Wide Application】-This Aluminum Base Plate Panel is widely used in the replacement of LED downlights, track lights, flooAdlights, flashlights,....
  • 【Note】-The LED lamp board must be powered by constant current LED driving power supply, and the output parameters of the power supply are....
Check Stock

Othmro LED Chip Bulb Lamp 3W 9-10V Cob LED Chip Light, 50mm Length for Replacing The Light Source Super Bright High Power or Floodlight Bright Light 1pcs

  • 【Material】-This LED Chip Bulb is made of high quality Auminum board, durable for daily use,low heat generating.
  • 【Advantage】-The LED light Panel has low consumption,high brightness,high Power LED,saving power,very low heat generating.
  • 【Wide Application】-This Aluminum Base Plate Panel is widely used in the replacement of LED downlights, track lights, flooAdlights, flashlights, stage lights.
  • 【Note】-The LED lamp board must be powered by constant current LED driving power supply, and the output parameters of the power supply are consistent with those of the lamp board.
  • The LED lamp plate must be installed on the aluminum radiator,otherwise the lamp plate is easy to burn out at high temperature.
Check Stock

Micro 100 FR-062-12 Grooving Tool, 1/16\ Width.100\ Proj, 3/8\ Min Bore Dia, 3/4\ Max Bore Depth, 3/16\ Offset, 3/8\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for generating full radius grooves.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Lockdown flat automatically locates tool on center.
  • AlTiN coated option provides added lubricity and increased wear resistance in difficult to machine materials.
Check Stock

Micro 100 RR-087-16 Grooving Tool - Retaining Ring.087\ Width.100\ Proj, 3/8\ Min Bore Dia, 1\ Max Bore Depth, 3/16\ Offset, 3/8\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for generating retaining ring grooves.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Lockdown flat automatically locates tool on center.
  • Coating options provide added lubricity and increased wear resistance in difficult to machine materials.
Check Stock

Micro 100 QRR-038-8 Grooving Tool - Retaining Ring - Quick Change.038\ Width.100\ Proj.310\ Min Bore Dia, 1/2\ Max Bore Depth.1538\ Offset, 5/16\ Shank Dia, 2\ OAL, Uncoated

  • Designed for generating retaning ring grooves in bores .180" and larger.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Proprietary Micro-Quik quick change system maximizes productivity through reliable accuracy and locational repeatability.
Check Stock

Micro 100 FG-250-040 Grooving Tool - Face Grooving.040\ Width.050\ Proj, 1/4\ Min Bore Dia.215\ Max Bore Depth, 1/8\ Offset, 1/4\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for generating square grooves in the face of the part.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications.
Check Stock

Micro 100 FG-375-093 Grooving Tool - Face Grooving, 3/32\ Width.100\ Proj, 3/8\ Min Bore Dia.320\ Max Bore Depth.188\ Offset, 3/8\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for generating square grooves in the face of the part.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications.
Check Stock

Micro 100 FG-250-030 Grooving Tool - Face Grooving.030\ Width.050\ Proj, 1/4\ Min Bore Dia.215\ Max Bore Depth, 1/8\ Offset, 1/4\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for generating square grooves in the face of the part.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications.
Check Stock

Micro 100 FG-500-156 Grooving Tool - Face Grooving, 5/32\ Width.100\ Proj, 1/2\ Min Bore Dia, 3/8\ Max Bore Depth, 1/4\ Offset, 1/2\ Shank Dia, 3\ OAL, Uncoated

  • Designed for generating square grooves in the face of the part.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications.
Check Stock

Micro 100 FG-125-020-025 Grooving Tool - Face Grooving.020\ Width.025\ Proj, 1/8\ Min Bore Dia, 3/8\ Max Bore Depth.063\ Offset, 1/8\ Shank Dia, 1-1/2\ OAL, Uncoated

  • Designed for generating square grooves in the face of the part.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications.
Check Stock

Micro 100 QFG-312-062 Face Grooving Tool - Quick Change, 1/16\ Width.100\ Proj, 5/16\ Min Bore Dia.225\ Max Bore Depth, 5/32\ Offset, 5/16\ Shank Dia, 2\ OAL, Uncoated

  • Designed for generating square grooves in the face of the part.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications.
Check Stock

Micro 100 FG-375-125-200 Grooving Tool - Face Grooving, 1/8\ Width.200\ Proj, 3/8\ Min Bore Dia, 1-1/4\ Max Bore Depth.188\ Offset, 3/8\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for generating square grooves in the face of the part.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications.
Check Stock

Mini Projector, AKIYO Portable Projector for Outdoor Built-in Battery, DLP Short Throw Projector, 1080P Full HD Supported Video Projector Compatible with HDMI TV Stick Laptop Smartphone (with Tripod)

  • ...LP projector fits in the palm of your hand, easy to enjoy home theater and outdoor entertainment anytime, anywhere, whether traveling or camping is a good choice. Size: 10.5*10.5*2.5cm, weight: 280g. Stylish design and piano baking lacquer finish to create a stylish appearance..
  • Uses Texas Instruments DLP chip, generating less heat Delivers vibrant colors and more vivid images than LED projectors High-performance fan ensures fast heat dissipation and far lower noise levels than LED projectors Built-in 1.5W HiFi dual speakers bring you a great audio and visual experience..
  • Simple UI design, HDMI plug-and-play. Playback time is 1.5 hours using the USB-C charging port, or if there is no available outlet, you can use a mobile power source or laptop to charge. It can also be used as a mobile power source to charge your phone. With the included tripod, the portable projector can be used for clear outdoor viewing..
  • With a powerful DLP chip, built-in 854*480p resolution, 120 ANSI lumens and three-stage adjustable brightness, you can enjoy clear and bright imaging even in dark environments. The projector is available in projection sizes of 30-120 inches and is equipped with ±40° vertical keystone correction for rectangular imaging..
Check Stock