Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap
- Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
- 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
- Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
- Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check StockAlyone (12 Pieces Per Pack) 5mm Carburetor Jets for Mikuni Vm22 Vm24 Vm26 125 150 Main Jets (A Set)
- [High Quality] The main jet kit for motorcycle carburetor is 100% brand new. The carburetor jet kit is made of copper, which is durable, corrosion-resistant, and has a long service life..
- [Carburetor main nozzle size] Total length 8mm, Diameter of head: 7mm, Thickness of Head: 3mm, Thread: 5x0.75mm.
- [Usage and compatibility]Carburetor main nozzle is suitable for Mikuni VM22 VM24 VM26 VM30 carbohydrates, widely used in 125cc 150cc 200cc 250cc motorcycle engines.
- [12 Pcs Carburetor main nozzle A Set] #45-72(#45 #48 #50 #52 #55 #58 #60 #62 #65 #68 #70 #72)..
- [12 Pcs Carburetor main nozzle B Set] #75-102(#75 #78 #80 #82 #85 #88 #90 #92 #95 #98 #100 #102)..
Check StockExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)
- 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
- Nozzle Throat Tube: Material - Stainless Steel.
- 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
- Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Check Stock
Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
- 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
- NTC connector with terminal, easy to intall..
- 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
- 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
- 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
- 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check StockAnet RepRap i3 3D Printer Aluminum MK2 MK3 Heated Bed 12V, Updated Version of MK2B & MK2A - Hot Bed for Anet A8 A6 A2, Black 220x220x3mm
- ►0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
- ►Heating Compatibility: compatible with all 1.75mm PLA ABS 3D printing block size£º20*20*10MM.
- ►Package Including:5 piece x 30mm Tube,5 piece x 0.4mm Nozzle,5 piece x Heater Blocks Hotend.
- ❤Intimate After-Sales:: If you find any problems, please contact us directly, we will give you the most satisfactory answer, thank you!.
Check Stock20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5
- Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
- Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
- Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
- Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
Check StockBibo Eyeful Pencil Eyeliner A - Brown Harajuku Culture Pack
- Premium Quality: MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
- Applicability: MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D....
- output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
- Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect....
- Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x....
Check Stock3D Printer Nozzles 26PCS Hardened Steel and Brass MK8 Nozzles 0.4MM with Cleaning Tool Kit for Makerbot Creality CR-10/ Ender 3/5 Compatible with All 1.75mm PLA ABS 3D Printer
- MK8 nozzle Parameter: Input diameter 1.75mm.
- Wide compatibility :0.4mm nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
- Value for money: package comes with 4 pieces of hardened steel nozzles, 12 pieces brass nozzles, 5 nozzle cleaning needles, 1 Nozzle Spanner , 1 Box....
- Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
- Cleaning needles ,wrench : 5 Flexible stainless steel needles with a of are used to clean 3D printer extruder hot end nozzle clogs and other hard to....
Check Stock32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3
- Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
- High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
- Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
- Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
- Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check StockWangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
- Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
- NTC connector with terminal, easy to intall.
- Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
- Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
- Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
- Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock
25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5 Pro, Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing..
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box..
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier..
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging..
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D prin....
Check StockOIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block
- Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
- NTC connector with terminal, easy to intall.
- Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
- Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
- Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
- Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock
Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)
- Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
- And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
- Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
- Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
- Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock
