Reviews 16mm Nozzle

Le Lematec Soda Blaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty Soda Blaster with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • The AS118 Soda Blaster gives you a clean finish that's fast and easy. This powerful blaster removes paint, rust, grease, and much more. Use it on cars, trucks, farm equipment and tools - or simply give your grill a good cleaning. Steel Nozzle Allows Precise Blasting- With a range of 90-150 PSI..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

Le Lematec Sandblaster Long Nozzle Attachment, Sandblasting Nozzle Tip for Portable Sandblaster, Sandblasting Accessory for Spot Blasting

  • Heavy-duty Sandblasting Long Nozzle made of steel and aluminium that is very suitable for tough working environments and high-speed sandblasting operations..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste..
  • Clean hard-to-reach areas, tight spaces, and small and complex objects easily with our long nozzle sandblaster tip (sandblaster gun sold separately). Easy to install and replace, switch from a short nozzle to this long nozzle..
  • Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm.
  • Compatible with all Le Lematec sandblasters and support various media. Refer to our media guide for a complete list of abrasives and sizes..
Check Stock

Le Lematec AS118 Blue Sandblaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty AS118 blue sandblaster kit with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • Easy Setup and Use AS118 Blue Sandblaster Kit that comes with 1/4'' NPT quick connector, user manual, & media guide so you can start sand blasting right out of the box..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

Le Lematec AS118 Black Sandblaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty AS118 Black sandblaster kit with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • The AS118 Sandblaster is the perfect tool for any job. This gun kit removes rust, paint, and cleans all sorts of surfaces - from wheels to BBQ grills! It can even etch glass with ease. One Tool Many Jobs. Operating between 90-150 PSI, these guns give you the flexibility to work with a variety of materials..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles,hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6,Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock

Le Lematec AS118-2C Premium Sandblaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty AS118-2C Gravity and Siphon Feed sandblaster kit with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • "The AS118-2C Premium Sandblaster Gun Kit operates at 90 PSI-150 PSI and Air flow of 12 CFM at 100 PSI. The Sandblaster features a media compartment that supports most blasting materials from aluminum oxide to coal slag and much more. The AS118-2 Sandblaster Gun Kit features siphon function with 2 control regulators making larger projects a breeze.".
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

Anytec 10Pcs Metal Cleaning Brush Set for Weed Pipe Clean Glass Hookah Smoking Brush Baby Feeding Bottle Brush

  • The brush head is nylon bristles. The well-made nylon bristles prevent scratching the items, and is also not easy to pluck.
  • Various sizes to meet all kinds of pipeline cleaning requirements: one set included 10 diameters. 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 12mm, 16mm 20mm, 24mm.
  • PREFECT FOR CLEAN THE DIFFICULT PARTS OF APPLIANCES. Such like coffee pot nozzle and teapot nozzle, nipple baby bottle tube, oil pourer, drinks....
  • Not too hard and not too soft, efficient cleaning will not damage your equipment, just like your toothbrush protect your teeth.
  • Package: 1 set of 10 brushes with varying diameters on a detachable key ring.
Check Stock

SKD RV Tech 10pcs Brass Misting Nozzles, 1/4 Inch Mister Nozzles Thread Misting Nozzle Tees for Outdoor Misting Cooling System Replacment.Misting Parts & Accessories

  • It only uses one half gallon per hour per nozzle..
  • Thread size: 4mm(diameter)*5mm(length) , 3/16" pitch. Note : this is a high Pressure mist nozzle , the Pressure is 20-80kg/cm.
  • features a sturdy brass body with stainless steel orifice.
  • Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Check Stock

Hicello Stainless Steel Fountain Nozzle, 3/8\ Pond Sprinkler Spray Head, Adjustable Pond Sprinkler Nozzle, Garden Column Water Spray Head

  • 【Excellent Performance】With stainless steel fountain nozzle effect, water and air are suctioned in, mixed intensively and accelerated into the air, forming an impressive soft flowing fountain..
  • 【Premium Quality】The pond column water spray head is made of quality stainless steel material, which is corrosion resistant and durable with a long service life..
  • 【Scientific Design】The jet angle of stainless steel spiral nozzle is generally 120 degrees with smooth flow paths, which can minimize the liquid blocking so that the liquid reaches the maximum flow..
  • 【Wide Application】The pond sprinkler head is widely used in the courtyard, garden, lawn, green belts and another small area of agricultural spray irrigation..
  • 【Product Details】The connection size of fountain nozzle: G2/8(DN10, 16mm). Nozzle size: approx. 56mm/2.20inch. Pressure: 30-50Kpa. Amount of water: 5-8 m3/H. Spray height: 0.5-1.0M. Cover the diameter: 1.6-2.0M..
Check Stock

Pop Rivet Gun, JiGiU 1\\/4 Rivet Gun Kit with Collection Bottle Include 200pcs Rivets Heavy Duty Hand Riveter Riveting Tool, 5 Interchangeable Heads for Metal, Wood, Plastic and Automotive

  • 【TWO HAND RIVETS GUN】Our Rivet Gun Set Comes with 5 Different Nozzles(2.4mm, 3.2mm, 4.0mm, 4.8mm, 6.4mm) to Work with Those Rivets ,And for The Convenience of Use, We Also Equipped with 200pcs Rivets.
  • 【5 SIZES REPLACe NOZZLE 】Adjustable Rivets Gun Include 5 in 1 Nozzle Head for Quick Easy Change Among Rivet Sizes from 2.4mm -4.8mm (Notice:6.4mm Aluminum Nail is The Largest Size It Can Handle)..
  • 【LABOUR-SAVING DESIGN】The Manual Rivet Gun with Two-Handle Design is Ergonomic, with a Soft Handle, Which is More Efficient and Labor-Saving Than a Single-Hand Rivet Gun.
  • 【COLLECTING BOTTLE& ASSEMBLE NOZZLE】 Rivet Gun Integrated Rivet Pin Catcher and Collecting Bottle Ensure you Safe,and Easy to Handle..
  • 【200 PCS RIVETS PACKAGE】Not Only Hand Rivet Gun Kit with 5 Nozzles,Include the 50 PCS 3/32 inch x 1/4 inch rivets 50 PCS 1/8 inch x 1/4 inch rivets 50PCS 5/32 inch x 1/4 inch rivets 30 PCS 3/16 inch x 1/4 inch rivets 20 PCS 1/4 inch x 1/4 inch rivets.
Check Stock

Caulking Nozzle 14 PCS Stainless Steel Caulk Nozzle Applicators with 4 Connection Bases

  • 14 PCS Stainless Steel Caulk Nozzle Applicators.
  • 7mm, 8mm, 9mm, 10mm, 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 23mm, 25mm, 28mm, 30mm.
  • 2 Hand Caulking Gun Connection Bases and 2 Sausage Caulking Gun Connection Bases.
  • A Bottle Preserving Oil to Prevent the Nozzles from Drying within 3-5 Days.
Check Stock

16 Pieces Brass Misting Nozzles Kit Atomizing Nozzle Kit 0.4 mm Orifice 2 Points 1/4 Inch Lock Misting Nozzles with 4 Pieces Plug for Patio Misting System Outdoor Cooling System Garden Water

  • Package content: comes with 16 x spray seats, 16 x nozzles, 4 x plugs, these spray cooling systems directly use water for spraying and cooling, without electricity, and can save much watering time compared with manual watering, enough for you and your family to use.
  • Brass misting nozzle: 10/24 thread, 0.015 inch/ 0.4 mm orifice, brass body, including self-sealing O-ring, can be applied without any leak-proof tape or sealant, the nozzle can produce very fine fog to cool the air and lower the temperature in the hot summer.
  • Reliable brass: the outdoor misting nozzle tees is made of brass material, which has high efficiency, anti-rust and anti-fog performance.
  • Other parts are made of polypropylene material, with good sealing, no leakage, stable and firm, long service life.
  • Maintenance and cleaning: hard water, lime and calcium may cause clogging of the atomizing nozzle.
  • Dip it in vinegar and warm water to clean the nozzle regularly.
  • When the misting nozzle is blocked by impurities, it can be completely disassembled, which makes it easy to clean.
  • Wide applications: 1/4 inch lock misting nozzles kits are very suitable for agriculture, terraces, greenhouses, swimming pools, lawns, gardens, cooling systems, irrigation (flowers, grass, vegetable watering), balcon....
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock