23 Pieces Caulking Finisher Kit Caulk Nozzle Applicator Stainless Steel Sealant Finishing Tool Caulk Nozzle Finisher Kit for Kitchen Bathroom Window, 23 Sizes
- Sufficient quantity: you will receive 23 pieces caulking finishers in 23 different sizes, abundant quantity and various sizes to meet your diverse caulking needs, provide nice sealing effect in different areas and angles.
- Sturdy material: our caulk nozzle applicators are made of quality stainless steel, which feature rust-resistant and anti-corrosion, easy to clean, durable and reusable.
- 23 Sizes: we offer you 23 size choices of the stainless steel sealant finishing tools, which will ensure different sealing requirements, the dimensions include 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 25, 26, 28, 30, 35 mm.
- Practical and easy to apply: with the 45 degree nozzle design, our caulk nozzle finishers can achieve perfect filling without causing chaos and uneven finishes can soothe and fill caulk jobs easily, without leaving messy and uneven finishes, so as to save you a lot of time, practical and can be applied alone, easy to clean and reuse.
- Available occasions: our caulk nozzle applicators can be applied for various kinds of occasions, suitable for kitchen, bathroom, water tank, door, window, bathroom, sink joint filling finishing and more.
Check Stock
Gel Coat Spray Gun Gelcoat Dump Gel Coat Sprayer Air Spray Gun Painting Tool Kit for DIY Home Fiberglass Spraying Coating Tool 0.3-0.6Mpa with Spray Nozzles
- 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
- 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
- 2 x 1000ml Plastic Cup (with metal cup cover).
- 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
- 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
- Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
- Hold thehandle and hold the gun. The air is ejected from the air jet..
- 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other ma....
Check Stock
Hicello Water Fountain Nozzle 1.5\ Brass DN40 Two Layers Fountain Nozzle Column Sprinkler Spray Head for Garden Pond Bring Beautiful Visual Effects
- Connection Size: G1 1/2(DN40, 46mm), Nozzle size: G1 1/2(DN40) Nozzle: approx. 120*82mm/4.82*3.23inch, G1 1/2(DN40) Nozzle: Pressure: 65Kpa, Amount of water: 10.0 m³/H, Spray height: 1.8M, Cover the diameter: 1.5M.
- The nozzle is made of quality brass material, corrosion resistant and durable, long service lifespan, beautiful brass golden color, high-grade looking..
- This is a small to large injector nozzle generates a lively full water pattern and offers oxygen enrichment. With injector effect, water and air are suctioned in, mixed intensively and accelerated into the air by the injector jet as an impressive soft flowing fountain..
- Applicable in the courtyard, garden, kitchen garden and another small area of agricultural spray irrigation.
- lawn, green belts, gardens and another small area of gardening sprinkler.
- sprinkler irrigation and industry, and another small area of cool roofs..
- Flower column Nozzle is one kind of the porous diffusion nozzle and is also called a layered flower nozzle or flower basket nozzle. When spraying water, its appearance is just like a bunch of fresh flowers. With beautiful design and simple installation, it is suitable for fountains in many occasions. Sprinkler features: It is a kind of porous scattering nozzle, also known as....
Check StockQtqgoitem Round Nozzle 1/2BSP Thread Flexible Oil Coolant Pipe Tube 60cm Long (Model: 4c0 87c 395 c03 724)
- Nozzle Size : 40 x 10mm/ 1.6" x 0.4"(L*Tip Dia).
- Overall Size : 60 x 2.6cm/ 23.6" x 1"(L*D).
- Package Content : 1 x Flexible Coolant Pipe.
Check StockCaulking Nozzle 14 PCS Stainless Steel Caulk Nozzle Applicators with 4 Connection Bases
- 14 PCS Stainless Steel Caulk Nozzle Applicators.
- 7mm, 8mm, 9mm, 10mm, 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 23mm, 25mm, 28mm, 30mm.
- 2 Hand Caulking Gun Connection Bases and 2 Sausage Caulking Gun Connection Bases.
- A Bottle Preserving Oil to Prevent the Nozzles from Drying within 3-5 Days.
Check StockMakita PR00000034 1-3/8\ Welding Nozzle
- WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
- WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
- WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
- WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
- MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock
Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)
- Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
- And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
- Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
- Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
- Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check StockiTechjoy Stainless Steel Vertical Sausage Stuffer and Sausage Maker w/4 Stuffing Tubes, Manual Sausage Stuffer Machine(2.2LB)
- Made of PP material and 304 stainless steel. All parts that contact food directly are reach up SGS food hygiene standard.
- 4 different diameter nozzle (Φ13 mm, Φ18 mm, Φ23 mm, Φ28 mm), which can make different sizes of sausages and salamis.
- The sausage machine is easy to disassemble, removable design is convenient for you to clean.
- Upright design with a 2.2 lb capacity, ideal for family gatherings, daily cooking use, enjoying homemade fun.
- Included components: Stuffer, Stuffing Tubes (4), brushes(2), and cotton thread.
Check Stock
4 Pcs Soldering Nozzles for Hot Air Gun SMD Rework Station 853d 862d Replacement
- [Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
- [Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
- [Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
- [Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
- [Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.
Check StockSideKing Battery Powered Sprayer Wand, 23.6inch Electric Sprayer Telescopic Watering Wand with 16.4FT Hose, Rechargeable and Portable Spray Wand for Gardening (3 Nozzles)
- ... Telescopic Wand: The garden sprayer wand can extend from 8.66in to 23.6in, allowing you to spray longer distances or hard-to-reach places with ease. Easy to assemble and use, comfortable handle makes it easier to carry when working outdoor for a long time..
- Adjustable Nozzle: Comes with 3 Nozzles, a wider spray range fan-shaped nozzle, shower-shaped nozzle, and a adjustable nozzle. You can adjust the intensity of the water spray by turning the nozzle, from direct spray to fine mist spray, exactly to suit your needs!.
- What You Get: 1 x Electric Handle, 1 x 23.6" Telescopic Water Wand, 1 x 16.4FT Water Pipe with Filter, 1 x Fan-shaped Spray Nozzle,1 x Shower-shaped Spray Nozzle, 1 x Adjustable Nozzle. Any questions about products, please feel free to contact us, we are always here to help!.
Check StockWangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer
- Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
- 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
- Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
- Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories
- 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
- Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
- Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
- When you use 3D printer nozzle brush to....
- Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
- Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check StockQtqgoitem 1/4\ PT Thread Flexible 20mm Width Flat Nozzle Water Oil Coolant Pipe Navy Blue (Model: 75a a5e 657 e34 094)
- Nozzle Width : Internal: 20mm/ 0.7"External: 23mm/ 0.9".
- Package Content : 1 x Flexible Coolant Pipe.
Check Stock
