Reviews 24mm Nozzle

Magic&shell Ceramic Sandblast Nozzle 10PCS Air Sandblaster Tips For Pneumatic Blasting 5mm and 6mm Inner Diameter

  • Product Name: Ceramic Nozzle.Material: Ceramic..
  • Outside diameter:15mm/0.59Inch.Bore diameter: 6mm/0.24Inch,5mm/0.20Inch.Length: 38mm..
  • Color: Pink.Package Includes:5 PCS 5mm Inner Diameter Ceramic Nozzle,5 PCS 6mm Inner Diameter Ceramic Nozzle..
  • Strong wear resistance, long life, cost saving, good electrical insulation at high temperature..
Check Stock

Orbit 10106H Misting Nozzle

  • * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
  • * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
  • * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
  • Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
  • * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
  • * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

Alyone (12 Pieces Per Pack) 5mm Carburetor Jets for Mikuni Vm22 Vm24 Vm26 125 150 Main Jets (A Set)

  • [High Quality] The main jet kit for motorcycle carburetor is 100% brand new. The carburetor jet kit is made of copper, which is durable, corrosion-resistant, and has a long service life..
  • [Carburetor main nozzle size] Total length 8mm, Diameter of head: 7mm, Thickness of Head: 3mm, Thread: 5x0.75mm.
  • [Usage and compatibility]Carburetor main nozzle is suitable for Mikuni VM22 VM24 VM26 VM30 carbohydrates, widely used in 125cc 150cc 200cc 250cc motorcycle engines.
  • [12 Pcs Carburetor main nozzle A Set] #45-72(#45 #48 #50 #52 #55 #58 #60 #62 #65 #68 #70 #72)..
  • [12 Pcs Carburetor main nozzle B Set] #75-102(#75 #78 #80 #82 #85 #88 #90 #92 #95 #98 #100 #102)..
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

Anytec 10Pcs Metal Cleaning Brush Set for Weed Pipe Clean Glass Hookah Smoking Brush Baby Feeding Bottle Brush

  • The brush head is nylon bristles. The well-made nylon bristles prevent scratching the items, and is also not easy to pluck.
  • Various sizes to meet all kinds of pipeline cleaning requirements: one set included 10 diameters. 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 12mm, 16mm 20mm, 24mm.
  • PREFECT FOR CLEAN THE DIFFICULT PARTS OF APPLIANCES. Such like coffee pot nozzle and teapot nozzle, nipple baby bottle tube, oil pourer, drinks....
  • Not too hard and not too soft, efficient cleaning will not damage your equipment, just like your toothbrush protect your teeth.
  • Package: 1 set of 10 brushes with varying diameters on a detachable key ring.
Check Stock

Qtqgoitem Round Nozzle 1/2BSP Thread Flexible Oil Coolant Pipe Tube 60cm Long (Model: 4c0 87c 395 c03 724)

  • Nozzle Size : 40 x 10mm/ 1.6" x 0.4"(L*Tip Dia).
  • Overall Size : 60 x 2.6cm/ 23.6" x 1"(L*D).
  • Package Content : 1 x Flexible Coolant Pipe.
Check Stock

KUWAN 30pcs Brass Misting Nozzles for Cooling System 0.023\ (0.6 mm) 10/24 UNC Garden (0.023)

  • Brass / SS 0.023 inches (0.6 mm) orifice, screw Into any 10/24-threaded mist nozzle opening.
  • High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water.
  • Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min.
  • Minimal water use of 1/2 gallon of water per hour per mist nozzle.
  • Leak-proof, self-sealing o-ring included with each brass nozzle.
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

Pressure Washer Extension Wand, Aihand 24FT Telescoping Power Washer Wand with Gutter & Brush Cleaner Attachment, 7 Spray Nozzle Tips, 2 Hose Inlet Adapters & Belt Harness, 4000 PSI

  • ...le belt support harness. This helps you have better control of the pressure washer gutter cleaner and reduces the strain on your neck, arms and back. No need to climb ladders, it makes your cleaning job safer and more efficient, allowing you to clean in comfort.
  • 【7 Spray Nozzle Tips】Aihand offers 7 different spray angles to make it easy to reach hard-to-reach areas. Nozzle kit includes 4 high pressure stainless steel quick connect nozzles (0°red nozzle, 15° yellow nozzle, 25°green nozzle, 40°white nozzle), one low pressure nozzle (65°black soap nozzle) and 2 jet stream tips (Blue tip for rinse mode, Pink tip for soap mode). They meet your cleaning needs in a variety of situations such as roofs, cars, fences, walls, windows, etc.
Check Stock

Baomain ZU05S 6mm Vacuum Ejector Push in One Touch Tube Type Pneumatic Fitting

  • Type: Push in Tube Type(Without Exhaust).
Check Stock