Reviews 3d Printer Under 2

Greensen Printer Stand with Storage, Metal Printer Cart, Easy-Install Printer Stand for Desk, Heavy Duty Printer Table, Printer Shelf with Deep Storage Basket, Printer Desk, Printer Stand Under Desk

  • 【Easy and Efficient Installation】 Following the video instructions, you'll have this printer table for home office assembled in minutes..
  • 【On/Under Desk Storage】 By installing or removing tires, Greensen 3d printer table can be used as On/Under Desk Storage..
  • 【Reliable Metal Material】With classic metal manufacturing craft, which is definitely more durable, sturdy, stable, safer than the plastic one, Greensen under desk printer stand can support your printer more durable, preventing the printer from falling down..
  • 【Thick and Strong Structure】 Come with 2.2" top shelf, including the 0.7" thick wood tray and 1.5" triangular metal structure, and 3" bottom storage layer, Greensen printer table with storage can hold up to 100lb..
  • 【Flexible Storage Solution】 Rolling by 4 wheels, which is flexible and lockable (2 lockings), the Greensen printer stand under desk could be slid in and out smoothly when under the table. The suitable size (16.14"×12.21"×15.35") makes it move freely without blocking the way. It also can be used as a coffee cart, garage tool cart, snack cart, game equipment cart, projector trolley, etc..
Check Stock

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

3pcs DEVMO 3D Printer Limit Switch Mechanical Switch Module Endstops Switch with 39.4 inch Cable Compatible with Ramps RepRap Tevo Tornado

  • Compatible with Ramps Tevo 3D Printer Parts, Optical Endstop switch with 1M Photoelectric Light Control.
  • Endstops for 3D Printer: usedd for Tevo, if you want to in all creality 3D Printer, CR -10 CR 10S S4 ,S5.
  • Must 3D Printer Limits: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Warm Tips: Generally, the printer DIY system need at least three optical switches.
  • Under normal circumstances, the system must be configured to at least three mechanical switches.
Check Stock

12 Pcs 3D Printer Heatbed Parts Silicone Leveling Solid Bed Mount Heat Resistant 3D Printer Parts Heat Buffer Silicone Heat Bed Parts Compatible with CR-10 Ender 3 Bottom Connect (Brown, 0.7 Inches)

  • Ample Amount: the package contains 12 pieces of 3D printer heatbed parts in brown, which are designed to replace your springs under the heated bed, sufficient quantity can meet your daily use and replacement needs.
  • Silicone Material: the 3D printer bed mounts are made of quality silicone material, stable and flexible, with nice heat resistant feature, can nicely reduce the vibrations when working, providing good leveling performance for your 3D printer.
  • Compatibility: the silicone bed leveling mounts are compatible with CR-10 and Ender 3 series 3D printers, they will install effectively and stably on your 3D printer, will not easily move.
  • Suitable Size: the heated bed mount measures approx. 4 mm/ 0.16 inches in inner diameter, 18 mm/ 0.7 inches in height, which is easy to level your 3D printer and remain your set levels.
  • Simple to Store: with compact size and lightweight, the 3d printer parts are easy for you to store in your tool box, occupying a little space, also very convenient to take out when needed.
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Blue

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Natural

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Blue

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, White

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Red

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Black, MP05775

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot MP05792 PLA Filament, 1.75 mm Diameter, Small Spool, Natural

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

Monoprice Filament Guiding Tube Designed for MP10 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase..
Check Stock