Reviews 3 Spindle Machine

MYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump

  • ✅ Package include: ①1 x 1.5KW 110V Spindle Motor ②1 x 1.5KW 110V VFD ③1 x 75W 110V Water Pump ④1 x 196 in Water Pipes ⑤1 x 2.6 in Spindle Motor Mount ⑥1x40 in Electric Wire ⑦10 x Drill Bits ⑧1 x2.8 in Brushes ⑨13 x ER11 Collet(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm).
  • ✅1.5KW Spindle Motor：Technical Parameters:φ1.16 x 10.5in (Diameter: 2.95cm x Length: 26.7 cm).
  • Weight: 7.05 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter..
  • Output Current: 5A. The machine is screwed to ensure the safety and reliability of the use. DC cooling fan low noise, large air volume.The converter has overload protection, overvoltage protection overheat protection etc..
  • ✅75W 110V Water Pump：Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performan....
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock

CNC 3018 Pro Max 3 Axis Desktop DIY Mini Wood Router Kit Engraver Woodworking PCB PVC Milling Engraving Carving Machine GRBL Control with ER11 Collet (3018 Pro Max)

  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change the spindle to a 3-pins module,also can carve the kraft paper, wood, leather(wallet), bamboo..
  • ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

MT3 BT30 ER25 8000r/m Engraving Spindle Unit Power Head Induction Motor Mechanical Kit w/370W Motor For CNC Engraving Milling Machine USA STOCK

  • ...also include english user manual.Supporting files:G-code (.nc/.txt/.tape/.gcode).
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change the spindle to a 3pins module,also can carve the kraft paper, wood, leather(wallet), bamboo..
  • ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min.
  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ✅Powerful 500W Spindle : 3-Axis CNC router machine will allow you do both caving and engraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
  • ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quie....
Check Stock

RATTMMOTOR 2.2KW CNC Air Cooled Spindle Motor ER20 80mm Spindle 220V High Speed 24000RPM 3HP 400HZ for CNC Router Engraver Milling Cutting Machine

  • The 2.2KW air-cooled spindle motor's 220V, 8.5A, 400HZ frequency, less than 0.05mm runout off, 0-24000RMP speed..
  • It should be noted that the spindle speed must be kept above 9000 rpm, otherwise the spindle will be damaged..
  • It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine..
  • This spindle is designed with a dustproof and waterproof cover, the body is made of stainless steel, and the rear is equipped with a cooling fan,....
  • It contains 4 bearings, high-precision grinding taper hole, high-precision, low noise..
Check Stock

FoxAlien x WoodMads WM-3020 CNC Router for Metal Caving, 300W Spindle Linear Rails and Ball Screws 3-axis Milling Engraving Machine for Aluminum Copper Wood Acrylic

  • [Outstanding Precision and Accuracy] The WM-3020 CNC machine is equipped with HG-15 linear bearings and 12mm balls crews on all 3 axes. These industrial components enable the carving to be faster, quieter, and more stable and precisely..
  • [Multiple Spindle Options] WM-3020 comes with a 300watt spindle, which is capable to engrave and cut wood, acrylic, carbon fiber, aluminum and brass. The z-axis is compatible with 65mm and 69mm spindle clamp, which means it is compatible with the trimmer routers such as DWP611, RT0701C, engraving module, and 1.5kw spindle..
  • [Aluminum Spoilboard with Scale] One-piece aluminum spoilboard enhances the flatness and strength. The scale is convenient for measurement and positioning. It is compatible with most of the hold-down clamps in the market..
  • [Grbl Open-source Based] The control board uses a 32-bit chip and is based on Grbl. It supports to set homing origin to any corner by editing the Grbl configurations..
  • [Main parts pre-assembled] Main parts are pre-assembled. It just takes 30-45 minutes to fully assemble the machine. It is made of all aluminum, which is sturdier and more stable. All necessary accessories for trial run are included in the package..
Check Stock

MYSWEETY Upgrade Version CNC 3018 Pro Engraver Machine, GRBL Control DIY Mini 3 Axis CNC Router Kit, Wood Router Engraver Pcb Milling Machine with Offline Controller + ER11 and 5mm Extension Rod

  • New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • The main two advantages of offline controller : 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • Simple Assembly: Download the English manual and software: https://s3.us-east-2.amazonaws.com/3018pro/3018PRO_1.1(1).rar. If you have any question, please contact us firstly, thanks!.
  • This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials. Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack..
  • Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry. Either by inscribing, and can be carved with lasers(not include). You can buy the laser head on asin: B07334WBC9, B07GR29FZR, B07GR22BL4.DescriptionDescription:.
Check Stock