Reviews 2 Spindle

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

Trailer Hub Spindle Nut Washer Kit

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

RATTMMOTOR CNC Spindle Motor Kit 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 220V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router

  • 【Package Include】: ①1 x 2.2KW 220V Water Cooled Spindle Motor ②1 x 2.2KW VFD 220V ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W....
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【Multi-Protection Functions of VFD】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection,....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

Southwest Wheel R30484X 84 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Round R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using 25580 inner and 15123 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs..
Check Stock

Southwest Wheel R30484X 84 Spindle & 5-5\ Bolt Circle Trailer Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

LEAPGOMAX Golf Cart Spindle Bushings Kit fit EZGO TXT/PDS 2001-UP Gas & Electric, Bushing Spindle, King Pin Tubes, Claw Copper Sleeves Kit, OEM#70648-G01 70749G01 70745G01

  • ⛳Fits Golf Carts: Colf Cart 2001-current E-Z-GO Gas & Electric TXT/PDS(Will not fit for EZGO RXV)4/6-Passenger Shuttle, ST 400, Woods Boundary MAV 400..
  • ⛳Fits ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200..
  • ⛳Fits Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles..
  • ⛳High quality with heavy duty exceed OEM quality Golf Cart Spindle Bushings Repair Kit Assembly..
  • ⛳Package: 2 PCS Spindle King Pin Tubes, OEM# 70745-G01,614034, 601707.
  • 2 PCS Spindle Bushing with Flange, OEM#70648-G01, 632925, 601915.
  • 2 PCS Spindle Bushing without Flange, OEM#70749-G01, 632926, 601916.
  • 2 PCS Spindle King Pin Bolts, OEM#00407-G6, 620380.
  • 2 PCS Thrust Washers, OEM# 70754-G01, 601920.
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

CCIYU Mower Spindle Spindle Assembly fit for MTD for CUB CADET for TROY-BILT: 618-06977, 618-06977A, 918-06977, 918-06977A; for OREGON: 82-105; for STENS: 285-700

  • COMPATIBLE MODELS:The Spindle Assemblies fit for CUB CADET: XT1-LT46, XT1-LT46 EFI FAB, XT1-LT46 FAB, XT1-LT46 KH, XT1-LT46 KH Carb, XT2-LX46, XT2-LX46 EFI, XT2-LX46 EFI FAB, XT2-LX46 FAB, XT2-LX46 KH, XT2-LX46 KH FAB, XT2-LX46 KW, XT2-LX46 LE FAB.
  • for MTD: 247.20442 T8200, 247.27039 T8600, 247.27042, 247.270421 T8200, 247.27049 T8200, 247.270491 T8200, 247.27333 T3100, 247.27391 T2800.
  • for TROY-BILT: LT FAB46, Super Bronco 46 Hydro, Super Bronco 46 XP, TB 2246 Hydro, TB2246.
  • THE IMPORTANCE OF LAWN MOWER SPINDLE: Spindle Assemblies are crucial parts for your lawn mower cutting deck that work together with the pulleys and belts to perform clean and even mowing. The blades of your mower rotate around the spindles and if the spindles are bent or broken or if the bearings get worn down, your mower won’t operate as it should. Fortunately, you can replace the spindles or the spindle bearings yourself to fix your mower..
  • HOW TO STOP THE SPINDLE FROM MOVING WHEN TAKING LAWN MOWER BLADES OFF: Loosen the clamp on a blade removal tool by turning the handle counterclockwise. Place the removal tool over the end of the blade and the stopping edge over the side of the deck. Turn the handle clockwise to tighten it in place and prevent the spindle from turning..
Check Stock

RATTMMOTOR CNC Router Spindle Motor 220V 2.2KW Square Air Cooled Spindle Motor ER20 4 Bearings 3-Phase 24000RPM 6A 400Hz for CNC Router Engraver Milling Cutting Machine

  • 【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ,....
  • 【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than....
  • 【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin....
  • 【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be....
  • 【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving..
Check Stock

7k TK Trailer Axle - 7000 lb Electric Brake 8 Lug - TK | 75/58 (5'0) | 8x6.5 |

  • ✔️ [Part Number] - SP466 Trailer Axle Spindle.
  • ✔️ [Stub Diameter] - 2-1/4" (2.25") | 57.15 mm.
  • ✔️ [Fitment] - 5,200-7,000 lbs Trailer Axle E-Z lube Spindle #42.
  • ✔️ [Compatible Bearings] - Bearing sets: 25580/20, 14125A/14276.
  • ✔️ [Quantity in Package] - 2 Pack of Spindle #84.
Check Stock