Comgrow 3D Printer PLA Filament 1KG 1.75mm Spool Black Color
- 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight. Please pass one end of the filament into the fixing hole to avoid being entangled after use..
- High quality PLA filament for your 3D printer..
- Compatible with any 3D printer that use 1.75mm diameter filament..
- Recommended Extrusion / Nozzle Temperature 180¡ãC - 215¡ãC..
Check StockCreality Official 3D Printer PLA Filament 1.75mm 1KG White
- High quality PLA filament for your 3D printer.After printing, please pass one end of the wire into the fixing hole to avoid the filament being entangled due to the loosening of the wire coil..
- 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight..
- Compatible with any 3D printer that use 1.75mm diameter filament..
- Recommended Extrusion/Nozzle Temperature 180°C - 215°C..
Check StockGeeetech PLA 3D Printer Filament, 1kg Spool (2.2lbs), 1.75mm Dimensional Accuracy +/- 0.03mm, Silver
- ✔️【Dimensional Accuracy & Consistency】– GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration. It works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
- ✔️【1kg (2.2lbs) Spool】–Pack of 1 1kg/(2.2lbs) Silver Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc.
- ✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers..
- ✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament..
- ✔️【100% Satisfaction Warranty】GEEETECH provides 100% Satisfaction Guarantee. If you are not satisfied with this filament, please kindly contact us at ANY TIME..
Check StockPurple PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockRed PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockIce White PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool has an ID=2-3/8″, OD=8″, and is 2.5″ wide.
- Recommended Settings: Nozzle Temperature 195 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockNeon Green PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament…
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockMidnight Black PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockHoney Gold PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockPearly Silver PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockMetallic Gray PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockPLA 3D Printer Filament 1.75mm SUNLU PLA Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool PLA 1.75 Black
- 【1KG(2.2 lbs) Spool】Spool Diameter: 8.00"-Spool Width: 2.50"-Spool Hub Hole Diameter: 2.20". SUNLU Strong Coils Design Help Your 3D Printing More....
- 【1.75mm PLA Filament】SUNLU PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. No Pungent Smell in Printing, No Harm to User....
- 【Tangle Less & Clog-free & Bubble-Free】Full Mechanical Winding and Strict Manual Examination, Which Guarantee the SUNLU PLA filaments tidy and....
- 【High Compatibility】SUNLU PLA Filament Works Perfectly with Most FDM 3D Printers on the Market, Such as Ender 3, CR 6, A 8, CR 10, Maker Bot, Mono....
- 【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 215-230℃, Bed 70℃-80℃. SUNLU 3D Filament are the Most Common Used Filaments....
Check StockSwimming Pool Cover Pump 850 GPH Submersible Sump Pumps Above Ground with 3 Adapters Drainage Hose 25 ft Power Cord (Blue)
- ...ltering function faster than the ordinary pump..
- Safty&Versatile: Built-in temperature control chip, connected or disconnected with temperature changes,don’t worry about burning the pump, safety in use. Extra length 25ft Power Cord, for large area use.
- 16ft drainage hose, suitable for the 1/2 ” water nozzle, can drain from any depth of the pool.3/4″ water nozzle and 3/4” crooked water nozzle is suitable for drainage hoses and garden hoses..
- Customer help: The pump comes with a user technical manual. We guarantee it for one year. Contains all of the packages. We provide 100% satisfactory customer service with 24 hours/7 days..
Check Stock