Reviews 70mm Nozzle- BestItemr.com

DONLAB MFC-R-6F Glass 6 Ports Single Manifold Vacuum Gas Distributor with 2mm PTFE Stopcocks and Right Air Nozzle

Single-tube manifold vacuum gas distributor 6 ports with 2mm PTFE stopcocks.
The outer diameter of the main tube is 28mm..
The side gas nozzle is 10mm O.D. and the lower stopcocks gas nozzle is 10.5mm O.D..

Material: aluminium alloy(Spray gun) ＆plastic(Cup).
Color: Dark red(Spray gun) ＆white(Cup).
Recommended pressure: 4-6 CFM/50-70 PSI, Cup size: 1.45 gallon.
Sizes of nozzles: Small nozzle: 4mm (medium viscosity materials) Meddle nozzle: 6mm (medium).

Brass / SS 0.023 inches (0.6 mm) orifice, screw Into any 10/24-threaded mist nozzle opening.
High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water.
Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min.
Minimal water use of 1/2 gallon of water per hour per mist nozzle.
Leak-proof, self-sealing o-ring included with each brass nozzle.

Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..

22 Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.This type of nozzle is applied in the low pressure.
This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
It is used a sturdy brass body with stainless steel orifice,Use of precision nozzle keypunch, sophisticated production,strong durability.
Operation Pressure:20-70kg/Cm .Flow Rate:80-145l/Min (21-38GPM).Minimal Water Use Of 1/2 GPH Per Nozzle.
Thread size:10-24 UNC，Orifice：0.008" (0.2 mm).

✔ Effective removal of oral odor.Extra gentle cleaning for around Implants, bridges, and crowns..
✔ Small investment, Peak performance - We recommend changing your handle Assembly Kit and water tips every 3 months to maintain your irrigator maximum performance..
✔ Ultra-fine soft nozzle that removes periodontal pockets from 6-7mm under the gums at the lowest pressure..
✔ Compatible with: Waterpik WP-70E, WP-60.
✔ Package includes 4pcs nozzle for Waterpik..

✔ Effective removal of oral odor.Extra gentle cleaning for around Implants, bridges, and crowns..
✔ Small investment, Peak performance - We recommend changing your handle Assembly Kit and water tips every 3 months to maintain your irrigator maximum performance..
✔ Ultra-fine soft nozzle that removes periodontal pockets from 6-7mm under the gums at the lowest pressure..
✔ Compatible with: Waterpik WP-70E, WP-60.
✔ Package includes 2pcs nozzle for Waterpik..

[Recommended Pressure] - 4-6 CFM/50-70 PSI.
[Material] - Aluminium alloy spray gun and plastic hopper.
[Item Features] - Versatile spray gun will upgrade the quality of your drywall, stucco, or even pool deck sealant.

Recommended pressure: 4-6 CFM/50-70 PSI, Cup size: 1.45 gallon.
Nozzle Size: 4mm (Medium Viscosity Materials)； 6mm (Medium Viscosity Materials)；8mm (High Viscosity Materials).
A handle on the cup makes it easy to use.
Easy pull swing trigger makes greater control.
Perfect performance with adjustable material control.

PETG with carbon fiber powder infill not long fiber, strength better normal PETG , strong and tough,colour is black.
Nozzle temp,220-230 degree, hotbed 70 degree, speed 25mm/s,retraction length 4mm, retraction speed 50mm/s,.
1kg/Spool,Vacuumed Sealed With Desiccant inside,then in small box. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)..
Strong layer adhesion Hardly shrinking 0.2-0.5%, barely warping Tough and break resistant: Strength 105R,Slight gloss in finish,Resistant to acids and....
We make each roll and each point been inspection qualify,hard quality control.

✔ Effective removal of oral odor.Extra gentle cleaning for around Implants, bridges, and crowns..
✔ Small investment, Peak performance - We recommend changing your handle Assembly Kit and water tips every 3 months to maintain your irrigator maximum performance..
✔ Ultra-fine soft nozzle that removes periodontal pockets from 6-7mm under the gums at the lowest pressure..
✔ Compatible with: Waterpik WP-70E, WP-60.
✔ Package includes 4pcs nozzle for Waterpik..

[ZIRO Matte PLA filament] The fantastic frosted texture make your artworks less plastic-feeling, more advanced beauty. Hassle-free printing, no....
[Recommended print settings] Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-70℃, Print Speed 30-70mm/s..
[Dimensional Accuracy and Consistency] Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament, compatible with most FDM 3D printers..
[Packaging] Vacuum sealed with desiccant. An extra reseal bag for storing used filament, a 5M cleaning filament, a 5M sample filament coil..
[After-sales service] We are always ready to help. ANY questions, please feel free to contact us, we will offer you a satisfactory solution..