Reviews 20mm Scope Rings

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

CVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces

  • ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
  • ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Astromania Adjustable Guiding Scope Rings 102 mm Inside Diameter (Pair) - for Telescope Tube Diameter or Finders 48 to 100mm

  • The inner diameter of the tube rings is 102 mm for Telescopes between 48 to 100mm tube diameter can be mounted adjustable..
  • The adjustment crews have teflon inlays for avoiding unaesthetic scratches and pressure marks on the telescope while still ensuring reliable clamping..
  • Solid metal guide scope rings for compact telescopes and finders with flat support surface and knurled metal screws..
  • At the base, the rings have a flat surface with four female M6 threads (Inner pair 20 mm - outer pair 38 mm) for easy adaption to dovetail bars or dovetail clamps. Big screws with maximum grip allow easy use - even with gloves..
  • Set: pair of two tube rings made of metal.The Astromania guide scope rings are suitable for small and medium-sized guiding telescopes.Ideal for astrophotography for mounting a guide scope parallel to the main telescope..
Check Stock

SVBONY SV182 Finder Scope, 6x30 Metal Finderscope, for Astronomy Telescope, with Crosshair and Bracket

  • the guide scope rings are suitable for small and medium-sized guiding telescopes.
  • 70mm compact deluxe finder guidescope kit.
  • ideal for astrophotography for mounting a guide scope parallel to the main telescope.
  • The mounting bar has two M6 through-holes on both sides for easy adaption to rings. and three threaded through-holes.
  • the center hole has 1/4"-20 threads and the two larger holes on either side of center have M8 x 1.25 threads.
  • Solid metal guide scope rings for compact finderscope or guidescope with knurled metal screws. big screws with maximum grip allow easy use - even with gloves.
  • The adjustment crews have teflon inlays for avoiding unaesthetic scratches and pressure marks on the telescope while still ensuring reliable clamping.
  • The inner diameter of the tube rings is 70 mm for telescopes between 43 to 70mm tube diameter can be mounted adjustable.
Check Stock

Monstrum Offset Cantilever Picatinny Scope Rings | 1 inch Diameter | Flat Dark Earth

  • The WH212 scope rings position the center of the scope tube at a height of 36 mm from the base, fits 1 inch, 30 mm and 34 mm tube optics.
  • Fits 20mm Picatinny rails and Weaver rails, net weight 153g(5.4oz).
  • Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a colorful anodizing for unique appearance, passed rigorous accuracy and stability tests.
  • Disadvantage and Warranty: Due to the different lighting environments, there are slight differences between real objects and pictures. We provide a lifetime warranty for this product.
Check Stock

Atom Optics 30mm Dovetail Scope Rings for 3/8\ or 11mm Dovetail Rails High Profile Scope Mounts 2PCS

  • 30mm scope rings 11mm Dovetail Rails 2pcs high profile，with allen wrench.
  • 3/8 Dovetail scope rings made of solid aluminum alloy with anodized black matte finish,precision machined.
  • Dovetail scope rings for 3/8" or 11 mm,the ring is for most scopes which are in 30mm scope tube.
  • 11mm Dovetail scope ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with 11mm Dovetail Dimension.
  • High profile scope rings (item height:2"),the height from the center of the scope tube to the picatinny base is 1.33 inches(34mm).
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

EGW Picatinny Rail Scope Mount Savage Rascal

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | Low Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | High Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ，Absolute Co-Witness

  • ✌【Perfect 1" Scope Rings For 11mm Dovetail Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 Pcs Medium Profile + 2 Pcs High Profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.55'' gap from base of mount to bottom of ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz per ring.
  • 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring..
  • ✌【Built-In Tape Protection & With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
Check Stock