Reviews 6 Screw Scope Rings

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pcs Allen Wrench..
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ...nt sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
  • ✌【Rail Clamp Screw Design & Easy To Install】With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 2 pcs allen wrench..
Check Stock

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ,Absolute Co-Witness

  • ...h prevents the ring from sliding once set..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
  • ✌【Rail Clamp Screw Design & Easy To Install】With 2 rail clamp screws and 4 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 11mm dovetail rail, simple and quick to remove or install. Comes with 2 pcs allen wrench..
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Ade Advanced Optics PS002 Cantilever One Piece Riflescope Mount – 1″ inch

  • This is a 1″ inch one piece riflescope rings. Mounting rings are pushed forward 2″ for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height” 1.5″. Weight 6oz. Screw Torque – 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

Burris 420180 Xtreme 1" Tactical Aluminum Scope Ring Set (Two Rings) for Picatinny-Style Mounts, Six Hole, Low 1/4 in. Height, Matte Black

  • ...t fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
  • suitable for all 1-inch / 25.4mm scope tube.
  • VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
  • this will hold any other 1" accessories that you might want to mount.
  • EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
  • the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
  • LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively lightweight compared to larger-sized rings which are particularly beneficial for those who need to carry their gun over long distances or for extended periods.
  • such rings are less expensive than larger-sized rings which makes them cost-effective option for those on a budget.
Check Stock

SVBONY SV185 Scope Rings, 1-inch Scope Rings, Fits All Dovetail 2-piece 1-inch Scope Mounts

  • 0.89 inches in height, from the center of the rifle scope tube to the bottom plane of the rail mount.
  • built-in tape inside per rings to prevent from marring the scope.
  • also prevent sliding and fixed position accurately.
  • with only 1 rail clamp screw and 1 scope clamp screw per side.
Check Stock

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

EGW Picatinny Rail Scope Mount Savage Rascal

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock