Reviews 14pin Breakout Box

Treedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit

  • This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
  • The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
  • This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
  • We can use it in many ways, it is highly recommended to use our breakout board.
  • Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock

S-Union Ethereum ETH ZEC Mining Power Supply 12V GPU/PSU Breakout Board + 12pcs 16AWG PCI-E 6Pin to 6+2Pin Cables 27.5Inch Length 70CM with 5 Nylon Cable Ties

  • 【Item】GPU Mining Power Supply Breakout Board and PCI-E 6Pin to 6+2Pin (Male to Male) cable.
  • 【Performance】Measured maximum can support to 1600W power supply, 12 groups of graphics card 6pin output.
  • 【Safety】The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. The line is 16 AWG wire，Able to....
  • 【Compatibility】This item is Compatible with GPU Mining Power Supply -HP 1200W/750W PSU. Such as DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12....
  • 【What You Get And Shipping】1x Power Supply Unit Breakout Board & 12x PCI-E 6Pin to 6+2Pin Cables & 5x Nylon Cable Ties. SHIPPED FROM THE U.S.....
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

DORHEA 5Pcs ESP32 Development Board GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 ESP-32 ESP-32S Expansion Board

  • ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V.
  • The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor..
  • The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board.
  • ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV.
  • This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
Check Stock

10Pcs USB 2.0 Breakout Board, MELIFE USB to DIP Adapter 2.54mm Breakout Board 4 Pins Pinboard USB Type A Breakout Board

  • PREMIUM QUALITY MATERIAL ENSURES LONG TERM SERVICE--This USB Breakout Board is made of 100% brand new and high quality material ensures longer use.
  • USB TYPE A FEMALE BREAKOUT BOARD--Standard USB type A female socket.
  • 4 PINS USB A BREAKBOARD BOARD--With 4 pins including VBUS, D+, D- and GND.
  • IDEAL TOOL FOR USB POWER SUPPLY AND BREADBOARD DESIGN--Great for DIY USB power supply, breadboard design, etc.
Check Stock

OLLGEN Auto Car OBD2 16 Pin Connector 16 Pin Male Connector Adapter Standard 16 Pin Male Plug OBD Shell OBDII PCB Diagnostic Tool Blue

  • Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
  • The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
  • Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
  • Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
  • Package Include:Standard 16Pin Male Plug x 1.
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

Blackmagic Design UltraStudio Monitor 3G Playback Device with Thunderbolt 3

  • What's in the box: UltraStudio Monitor with Thunderbolt 3 | Blackmagic Design 1 Year Limited Warranty.
  • Operating System: Mac 10.14 Mojave, Mac 10.15 Catalina or later. Windows 8.1 and 10, both 64-bit. Linux.
Check Stock

SparkFun Compatible with Arduino Pro Mini Starter Kit - 5V/16MHz - Comes to get a Project Started

  • The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
  • Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
  • Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
  • Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
  • Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).
Check Stock

GeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header

  • Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
  • Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
  • Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
  • For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
  • Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check Stock

Treedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
  • Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
  • Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
  • Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
  • Note: The package is not include teensy development board.
Check Stock

3-Pack ESP8266 Development Board, Aideepen ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 ESP-12E NODEMCU V2

  • 【ESP8266 ESP-12E】This esp8266 breakout board can fully compatible with ESP8266 ESP-12E..
  • 【Expansion Board】This expansion board can expand one GPIO pin of ESP8266 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative..
  • 【Ease to Use】Needn't welding components.These boards fit your ESP8266 ESP-12E perfectly,can be inserted into the sockets with minor effort by hand..
  • 【Good quality】This ESP8266 Breakout Board is design with double-layer that One pin is wired on both sides. Great contact and stable signal transmission to your ESP8266 board..
  • 【Why choose us】Aideepen specializes in various electronic components,We have always cared about the customer experience and improve the product function details,please feel free to contact us..
Check Stock

S-Union [8PCS] New 16AWG 6Pin PCI-E to 8 6+2 pin Cable 27.5 Inch 70CM Length PCI 6Pin Male to Male Cable for GPU/PSU Breakout Board GPU Ethereum ETH Mining Power Supply with 5 Nylon Cable Ties

  • 【Item】PCI-E 6Pin to 8 (6+2) pin Male to Male Cable.
  • 【Safety】This item is 16 AWG wire，Able to withstand greater current and high power appliances.
  • 【Feature】The line is 27.5 inch (70CM) long, easy to use and connect.
  • 【Compatibility】This item is Compatible with Graphics Video Card, GPU breakout board,GPU Mining Power Supply, for GPU breakout board Search:....
  • 【What You Get And Shipping】8 x PCIe 6Pin to 6+2 Pin Male to Male Cable & 5x Nylon Cable Ties. SHIPPED FROM THE U.S. Delivery time takes about 2-5....
Check Stock