Reviews 12mm Nozzle

Alyone (12 Pieces Per Pack) 5mm Carburetor Jets for Mikuni Vm22 Vm24 Vm26 125 150 Main Jets (A Set)

  • [High Quality] The main jet kit for motorcycle carburetor is 100% brand new. The carburetor jet kit is made of copper, which is durable, corrosion-resistant, and has a long service life..
  • [Carburetor main nozzle size] Total length 8mm, Diameter of head: 7mm, Thickness of Head: 3mm, Thread: 5x0.75mm.
  • [Usage and compatibility]Carburetor main nozzle is suitable for Mikuni VM22 VM24 VM26 VM30 carbohydrates, widely used in 125cc 150cc 200cc 250cc motorcycle engines.
  • [12 Pcs Carburetor main nozzle A Set] #45-72(#45 #48 #50 #52 #55 #58 #60 #62 #65 #68 #70 #72)..
  • [12 Pcs Carburetor main nozzle B Set] #75-102(#75 #78 #80 #82 #85 #88 #90 #92 #95 #98 #100 #102)..
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock

INCREWAY 3pcs Silicone Heater Block Cover High Temperature Resistance Silicone Socks for V6 E3D Printer Extruder Hotend，Black

  • Size of Heater Block: 20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/ thermistor: 3mm.
  • High Quality Material: Made of solid aluminum material with sandblasting oxidation treatment, durable in use.
  • Inner Hole: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Nozzle: Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat.
  • Application: Accept Nozzle with M6 screw thread for Reprap.
Check Stock

Vacuum Attachments Replacement 1 1/4 inch & 1 3/8 inch Vacuum Cleaner Accessories Brush Kit for Standard Hose Set of 6

  • The Vacuum Attachments pieces come with an 1-3/8''(35mm) to 1-1/4''(32mm) hose adapter ,NOT fit Shark Lift Away Vacuum Cleaner ,NOT fit Bissell style 12,NOT fit the Shark vacuum,NOT fit shopvac. NOT fit Kenmore vacuum.NOT fit Bissell Powerforce，NOT fit on Miele vacuum cleaner.
  • 1 1/4'' horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
  • 1-1/4'' Nozzle Combination Tool, designed to clean the crevice and dust the board..
  • 1 1/4'' Vacuum Attachment Wet or dry vacuum crevices tool for cleaning tight spaces. 1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
  • The small vacuum attachments set includes 32 mm(1 /1/4 inch) & 35 mm( 1 3/8 inch) Hose Adapter, 1.25" ( 32mm) horsehair Brush, 1.25" ( 32mm) upholstery tool, 1.25" ( 32mm) utility nozzle with brush, 1.25" ( 32mm) brush & nozzle combination tool, 1.25" ( 32mm) crevice tool,Please measure and confirm your vacuum attachments outside diameter before purchasing.
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

Toro T5 Rapid Set Rotor with 5' Pop-Up

  • 5 (127mm) Pop-Up Easily replaces many competitive 4 (100mm) units in the same footprint but delivers an extra inch of pop-up..
  • Nozzle Tree The T5 comes with a full nozzle tree of 8 standard nozzles (25 Degrees ) and 4 low angle nozzles (10 Degrees )..
Check Stock

PD0088-12 PD0019-12 Drag Tip Kit for Eastwood Versa-Cut 40amp Plasma Cutter Consumables 34pcs

  • 34pcs Plasma cutting consumables kit equivalent to Eastwood Versa-Cut 40amp plasma cutter PLTrafimet CB50 torch consumables, aftermarket replacement, not original.
  • PD0088-12 Plasma tip / nozzle x 10pcs, drag tip,diameter 0.047in / 1.2mm.
  • PD0019-12 Plasma tip / nozzle x 10pcs, diameter 0.047in / 1.2mm.
  • PE0007 Plasma air diffuser x2pcs,PC0003 Plasma outside nozzle x 2pcs.
Check Stock

Philips Sonicare AirFloss to [ air ] Floss for Replacement Nozzle 2 pcs Set HX8012/01

  • For 1 Philips Airfloss HX8211/03 with 1 nozzle, or 1 Airfloss Ultra HX8332/30, HX8332/12 reservoir with 1 nozzle..
  • Portable and compact size, lightweight environmental-friendly plastic material, easy to fit in your pocket or any bags during trips. A perfect travel case to organize your electric flosser and nozzle..
  • This Philips Airfloss Ultra travel case protects your water flosser and water flosser nozzle from getting lost, bumps, dents and scratches..
  • Product dimension: 204*99.6*42.2mm/ 8.03*3.92*1.66 inch.
  • Philips Airfloss HX8211/03, Airfloss Ultra HX8332/30, Airfloss Ultra HX8332/12 and nozzle are not include in the package..
Check Stock

3D Printer Nozzles 26PCS Hardened Steel and Brass MK8 Nozzles 0.4MM with Cleaning Tool Kit for Makerbot Creality CR-10/ Ender 3/5 Compatible with All 1.75mm PLA ABS 3D Printer

  • MK8 nozzle Parameter: Input diameter 1.75mm.
  • Wide compatibility :0.4mm nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
  • Value for money: package comes with 4 pieces of hardened steel nozzles, 12 pieces brass nozzles, 5 nozzle cleaning needles, 1 Nozzle Spanner , 1 Box....
  • Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
  • Cleaning needles ,wrench : 5 Flexible stainless steel needles with a of are used to clean 3D printer extruder hot end nozzle clogs and other hard to....
Check Stock

Travel Case for Philips Airfloss Water Flosser HX8211/03, HX8332/30, HX8332/12，Water Flosser Storage Carrying Case (White)

  • For 1 Philips Sonicare Airfloss HX8211/03 with 1 nozzle, or 1 Airfloss Ultra HX8332/30, HX8332/12 reservoir with 1 nozzle..
  • Portable and compact size, lightweight environmental-friendly plastic material, easy to fit in your pocket or any bags during trips. A perfect travel case to organize your electric flosser and nozzle..
  • This Philips Sonicare Airfloss Ultra travel case protects your water flosser and water flosser nozzle from getting lost, bumps, dents and scratches..
  • Product dimension: 204*99.6*42.2mm/ 8.03*3.92*1.66 inch.
  • Philips Sonicare Airfloss HX8211/03, Airfloss Ultra HX8332/30, Airfloss Ultra HX8332/12 and nozzle are not include in the package..
Check Stock

Bibo Eyeful Pencil Eyeliner A - Brown Harajuku Culture Pack

  • Premium Quality: MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
  • Applicability: MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D....
  • output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
  • Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect....
  • Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x....
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock