3D BEST Q Carbon Fiber Polycarbonate 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool, Really Carbon Fiber-infill，Black
- Weight: 1 KG (approximately 2.20 lbs) Spool, 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- Recommended Extrusion/Nozzle Temperature: 240°C - 270°C Base Plate/Print Bed Temperature:90~110°C.
- Attention please: Clean the nozzle before printing OR just use a 0.5mm or above nozzle to avoid clog..
- The printed workpiece is frosted surface and almost impervious to light.
Check Stock
LabEdit Portable Vacuum Pressure Pump with Tubing and Connectors
- ...mp is 110-120V and the working HZ is 60HZ so It is made for USA market. (If you want to use this product in other country, please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
- There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. The three different size hoses are one piece 4mm ID x 5mm OD hose.
- one unit 6mm ID x 9mm OD. These three type hose could fit most of different size filter bottle nozzle..
- The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
- The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the product is working..
Check Stock
Omega HyperDry Professional Ionic Hair Dryer | Ultra Light Weight | IQ Perfetto | High-Tech Brushless Motor | 2000W
- PROFESSIONAL GRADE - The Omega HyperDry is constructed for ease of use for even the most demanding salons. Digitally controlled, brushless motor delivers extreme power while lasting longer than other professional hair dryer. It is also equipped with a heavy duty 10 ft cord. Best hair dryer on the market!.
- PERFORMANCE - 110,000 RPM Air Multiplying Technology, High Speed/ High Power 2000W Brushless Motor with extremely low-noise and low-vibration. Also features a Motor Self-Cleaning Mode..
- SETTINGS - The Omega HyperDry utilizes 6 Heat/Speed settings to provide you the ideal match for any hair type. Additional, Cool-Shot button allows instant cool burst to seal in any style! Healthy looking hair..
- LIGHT AND ERGONOMIC - The Omega HyperDry is extremely compact, with an ergonomic handle that makes it very comfortable to use. Weighing just 10.9 ounces and perfectly balanced, it provides effortless use in any working condition. Weights 40% less than Dyson Supersonic Dryers..
- CONCENTRATOR NOZZEL ATTACHMENTS - The Omega HyperDry comes with 3 different nozzle attachments: 65mm Concentrator Nozzle, 75mm Concentrator Nozzle, and BONUS Diffuser..
Check StockHATCHBOX PLA 3D Printer Filament, Dimension Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm, Carbon
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- PLA (Polylactic Acid) Carbon Fiber 3D Printer Filament Vacuumed Sealed With Desiccant.
- Recommended Extrusion/Nozzle Temperature 190°C - 230°C (87°F - 110°F).
- Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check StockVCT Deluxe Air Blow Gun with 4", 12", and 20" Long Angled Nozzle
- This 3 piece air blow gun kit is made of nylon construction and comes in sizes 110 mm/4.3", 300 mm/12" and 490/19.5" mm with ergonomic handles and squeeze trigger to adjust the amount of air output..
- The pistol design with ergonomic handle feels great in your hand and makes it very easy to use. Air inlet: 1/4"..
- Comfortable lever control and insulated handle.
- Angled Nozzle easily gets into tight places.
Check Stock3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)
- ❃❃ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup..
- ❃❃ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation..
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern..
- ❃❃ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 24V, 0.06A..
Check StockZENY Airbrush Kit Airbrush Pen Spray Gun Airbrushing Compressor Set for Makeup,Painting Tattoo Nail
- Multi-Purpose Precision Dual-Action Gravity Feed Airbrush with a 0.4 mm durable stainless stee Nozzle.7cc Gravity Feed Fluid Cup with lid for easy....
- Dual-action trigger Air/Fluid Control:Only Air Spray: Press the Air/Fluid Control Knob down vertically.(Perfect for blowing dry the spraying sur`face....
- Removable Needle and Nozzle Caps help you to spray the full range of spraying and stippling effect.The Adjusting Screw in the back of the air brush....
- Fit for Color Fluid: Watercolor Pigments, Inks and Dyes, Acrylics, Automotive Urethanes, Lacquers and Enamels. (Not Included).
- Airbrush Air Hose (Comes with TC-100 Air Compressor),High Performance Mini 12V DC Airbrush Compressor with direct plug in 110V AC Adapter.
Check Stock4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup..
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation..
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern..
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A..
Check Stock
NestEcho Laboratory Vacuum Filtration Pump for USA Market
- ...ump is 110-120V and the working HZ is 60HZ so It is made for USA market. (If you want to use this product in other country,please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
- There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. one unit 4mm ID x 5mm OD Transparent tube.
- The tubing is flexible so lab vacuum filtration pump can be suitable for different lab filter bottle in the market..
- The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
- The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the ....
Check StockMakita PR00000034 1-3/8\ Welding Nozzle
- WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
- WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
- WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
- WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
- MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock
FLASHFORGE 3D Printer Adventurer 4 Lite, Auto Leveling Glass Build Plate, Removable Nozzle One-Click Replacement, 4.3" Touchscreen, 1KG PLA Filament, Enclosed Chamber 220 x 200 x 250 mm
- 【Removable Nozzle & Support Various Filament】--- Snap-in design nozzle, replaced in 3 seconds, tool-free easier for replacement and maintenance. 240/265℃ nozzle can support various filament like ABS/PC/PLA/PLA-CF/PETG/PETG-CF. (Must buy 0.6mm/265℃ for PETG additionally.).
- 【Real Auto-Level & Excellent First-Layer Printing】--- You can play it without leveling after unpacking.
- Applying CNC processed mounting base, 9-points compensation via software to ensure the flatness of the platform, dual Y-axis guide rail to make platform runs more steady, ensuring the more excellent first-layer of printing..
- 【Multi-Device Printing】--- With new software FlashPrint, you can control multiple printers online on your computer/mobile phone..
- 【1Kg Filament & Large Print Volume】--- Built-in 1KG filament spool holder, no need external bracket anymore. The large print volume 200x200x250mm can meet most of your needs..
- 【Glass Build Plate】--- With strong adhesion and uniform heating, it can be heated to 110℃ to meet the printing requirements of various filaments. I....
Check StockApollo Sprayers HVLP ECO-4 4-Stage Turbine Paint Spray System E5011 Spray Gun & 20 Hose
- E4-110-5 Turbine Specifications: 4-stage, 110VAC 60HZ with QT Quiet Technology to reduce dBa levels, and dual air filters for a longer motor life, in....
- Performance Specifications: 9.0 PSI (0.62 Bar) sealed.
- 130 CFM (3.68 cmm). NOTE: This unit is equipped with an internal air relief valve to....
- E5011 Bleeder Style Spray Gun features 1 quart (1 litre) cup assembly.
- ECO-4 is ideal for applying a wide viscosity range of coatings to such items as cars, boats, planes, wood projects, fencing, farm equipment, machinery....
- Made in the USA and comes with a limited 2-year warranty..
Check Stock
Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)
- Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
- And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
- Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
- Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
- Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock
