Reviews 1 5 Kw Spindles

CCIYU Mower Spindle Spindle Assembly fit for MTD for CUB CADET for TROY-BILT: 618-06977, 618-06977A, 918-06977, 918-06977A; for OREGON: 82-105; for STENS: 285-700

  • ...TROY-BILT: LT FAB46, Super Bronco 46 Hydro, Super Bronco 46 XP, TB 2246 Hydro, TB2246.
  • THE IMPORTANCE OF LAWN MOWER SPINDLE: Spindle Assemblies are crucial parts for your lawn mower cutting deck that work together with the pulleys and belts to perform clean and even mowing. The blades of your mower rotate around the spindles and if the spindles are bent or broken or if the bearings get worn down, your mower won’t operate as it should. Fortunately, you can replace the spindles or the spindle bearings yourself to fix your mower..
  • HOW TO STOP THE SPINDLE FROM MOVING WHEN TAKING LAWN MOWER BLADES OFF: Loosen the clamp on a blade removal tool by turning the handle counterclockwise. Place the removal tool over the end of the blade and the stopping edge over the side of the deck. Turn the handle clockwise to tighten it in place and prevent the spindle from turning..
  • PRECAUTIONS: Before you get to work replacing the spindle in your riding mower, you need to take several steps to ensure your safety. Park the mower on a level surface, set the parking brake and pull out the keys from the ignition..
  • REMIND: Please kindly check size information on the detail page to make sure it will fit yours before purchase..
Check Stock

Incoloy 800 Universal Flo-Thru Heater Element

  • This Universal Heater Element is rated 5.5Kw or 5500W, 220V, Incoloy 800 Metal (Non-Catted).
  • For 110V application the 5.5 kW heater element outputs 1.375 kW (5.5 kW = 18766 BTU).
  • Dimension (approx.): 10 inches long x 1.37 inches across, and normally used in a 15 inch long flo-thru heater.
Check Stock

Full Deck Rebuild Kit Compatible with Cub Cadet RZT 50inch Zero Turn Troy Bilt RZT50 Mowers 618-04125 918-04125

  • Fits Models: RZT50, RZT50 KW, RZT50VT, Mustang RZT 50, Mustang XP.
  • (3) Spindles - Replaces 618-04126, 618-04126A, 918-04125, 918-04125B, 918-04126, 918-04126A, 918-04126B.
  • (3) Blades - Replaces 742-04053A, 742-04053B, 742-04053C, 942-04053A, 942-04053B, 942-04053C.
  • (3) Pulleys - Replaces 756-04129B, 756-04129C, 956-04129, 956-04129C ***Pulleys may come in different colors***.
  • (4) Deck Wheels - Replaces 734-04155, 734-04039A, 734-3058, 734-3058B, 753-04856, 753-04856A | (1) Belt - Replaces 754-04044, 754-04044A, 954-04044,....
Check Stock

Chrysler Genuine 68018109AA Air Conditioning and Heater Actuator

  • Material: Made of Stainless Steel, durable for use..
  • Suitable Model: for Eberspacher Airtronic D4 D4S..
  • Power Available: 2 power types for you to choose, 2KW, 5KW..
  • Fitment Type: Direct Replacement. Easy install, simple operation..
  • Size: (Approx) Outer Diameter(2KW) 1.69inch/43mm, Height(2KW): 4.17inch/106mm.
  • Outer Diameter(5KW) 2.05inch/52mm, Height(5KW): 5.39inch/137mm..
Check Stock

Honda Genuine 79581-S84-A41 Heater Control Knob

  • Fitment Type: Direct Replacement. Easy install, simple operation..
  • Suitable Model: for Eberspacher Airtronic D4 D4S..
  • Material: Made of Stainless Steel, durable for use..
  • Size: (Approx) Outer Diameter(2KW) 1.69inch/43mm, Height(2KW): 4.17inch/106mm.
  • Outer Diameter(5KW) 2.05inch/52mm, Height(5KW): 5.39inch/137mm..
  • Power Available: 2 power types for you to choose, 2KW, 5KW..
Check Stock

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

RIGID HITCH INCORPORATED Pair of 5-Bolt On 4-1/2 Inch Hub Assembly AKRD-2200545 Includes 2 1-1/16 Inch Straight Spindles & Bearings

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub).
  • Spindles feature a ROUND 1-1/4" stock diameter with a bearing surface of 1-1/16 inch..
Check Stock

MYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump

  • ✅ Package include: ①1 x 1.5KW 110V Spindle Motor ②1 x 1.5KW 110V VFD ③1 x 75W 110V Water Pump ④1 x 196 in Water Pipes ⑤1 x 2.6 in Spindle Motor Mount ⑥1x40 in Electric Wire ⑦10 x Drill Bits ⑧1 x2.8 in Brushes ⑨13 x ER11 Collet(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm).
  • ✅1.5KW Spindle Motor：Technical Parameters:φ1.16 x 10.5in (Diameter: 2.95cm x Length: 26.7 cm).
  • Weight: 7.05 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter..
  • Output Current: 5A. The machine is screwed to ensure the safety and reliability of the use. DC cooling fan low noise, large air volume.The converter has overload protection, overvoltage protection overheat protection etc..
  • ✅75W 110V Water Pump：Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performan....
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

Wooden Baluster Spindles 5-3/4', Pack of 10 Oak Wood Spindles for Crafts, Woodworking, and Furniture, by Woodpeckers

  • FURNITURE-MAKING, AHOY!  -- You're all ready to craft a masterpiece, whether that's a crib, bassinet, or rocking chair. Or maybe you're making models or miniatures. Whatever it is, you need Small wooden spindles. Lots of them. These solid oak spindles are just what you're looking for..
  • THE PERFECT SIZE - If you need one thing to fit EXACTLY, it's your wooden spindles for furniture. These spindles have a diameter of 1/2", tenon length of 1/2" and tenon diameter of 1/4". No more shaky spindles or squeeeeezing the spindle into a too-Small hole!.
  • SPINDLES, NOT SPINDLY -- These might be spindles, but there's nothing spindly about them. Made of solid oak wood, they're strong and built to last. And they're sanded down for a smooth surface that's easy to paint or stain. Now that's a spindle you can (wood)work with!.
  • HOW MANY WAYS CAN YOU CRAFT WITH SPINDLES? -- These wood spindles are not only for furniture! Use them to make unique crafts like spindle snowmen, planters, boho candle holders, or even an eye-catching jewelry display..
  • WOOD PARTS FOR CRAFTERS, BY CRAFTERS - At Woodpeckers, crafting and building with wood is our thing. Bringing you more delightful wooden craft supplies is our fun. And seeing pics of your creative creations - that's our after-we-fini....
Check Stock

AtoZ Fabrication Tire Carrier Hinge Kit Mega Spindle

  • Mega spindles are recommended for tire carriers built with Jerry Can mounts or cargo racks.
  • US-sourced high grade 4130 chromoly steel with CNC-machined surfaces for better welding and carrier rigidity.
  • Mega spindle has 1.5" spindle main diameter compared to 1.25" for standard spindles.
Check Stock

RIGID HITCH INCORPORATED Pair of 5-Bolt On 4-1/2 Inch Hub Assembly AKSQ-2200545 Includes 2 Square Shaft 1-1/16 Inch Straight Spindles & Bearings

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub).
  • Spindles feature a 1-1/2" SQUARE stock diameter with a bearing surface of 1-1/16 inch..
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock