Reviews odroid Gpu

32GB ODROID C2 eMMC 5.0 Module with Android OS

• ODROID C2 TURBO: eMMC modules designed specifically for the ODROID C2 and makes one of the fastest single board computers on the market EVEN FASTER!.
• BLAZING PERFORMANCE: MicroSD cards are slow and writes are even slower, eMMC opens a world of possibilities and truly enables the COMPUTER in single....
• PLUG AND PLAY: Preloaded with Linux OS, the eMMC is plug and play and also comes with an MicroSD adapter for burning your own images.
• LATEST TECHNOLOGY: Built on the eMMC 5.0 specification, allowing for 120MB+ read and write speed and super low latency.
• The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2).

SBC Wifi Module 4 for ODROID XU4 C2 C1 H2

• For those who wants to protect the ODROID-C2 board from dust and the elements.
• The drawings of the case is open in AutoCAD and STEP format by Hardkernel..

Banana Pi BPI-M5 Amlogic S905X3 Single Board Computer with LPDDR4 4GB RAM and 16GB eMMC Storage for AIOT Support Android Debian Raspbian Armbian

• [High Performance Processor] Amlogic S905X3 quad-core Cortex-A55 processor (2.0GHz).
• 16GB eMMC onboard storage ---- MicroSD slot with support for up to 256GB expansion.
• [4K Smart Home Audio and Video chip] Adopt quad-core 64-bit ARM-A55 architecture CPU chips, integrate G31 graphics processor, support 4K video decoding and 4K video output.
• [SDK and Various System Operation Support] Banana Pi M5 support multiple various OS, like Android 9, and Raspbian and Linux system, as well as third party image Odroid Android image.
• [Multifunction Interfaces] 4 x USB 3.0 ports.
• Power Source: 5 volts at 3 amps via micro USB (TYPE C).
• [Wifi & BT support via expansion board] BPI M5 support SDIO interface Wifi&BT, you can buy the WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluetooth 5.0..
• [Wiki] https://wiki.banana-pi.org/Banana_Pi_BPI-M5.
• If you have any after-sales problems, please contact monica @ smartfire.cn. Click "WayPonDEV" and ask a question or leave the message in our forum at "forum.youyeetoo .com/"..

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3, Libre Computer Board, ASUS Tinker Board (Translucent)

• ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
• INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
• QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
• TRANSLUCENT WITH FRONT LED AND IR: Sleek design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
• TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results..

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Board, ASUS Tinker Board (Black)

• ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
• INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
• QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
• MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
• TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best r....

C4Labs Zebra Case - for ODROID-C2 REV 0.3- Black Ice

LeTaoXing DC 5V 4A Switching Power Supply Adapter 20W 5V/4A for Raspberry Pi X828/X825/X820 SATA Expansion Board/ X750/ X720/ X700 UPS/ X735 Power Management Board/Jetson Nano/T300/T200/T100

• ...you are powering with it, The voltage of the power supply will be reduced to 5V when it is connected to the appliance..
• Compatible with X750/ X705/ X725/ X700/ X720 UPS, X735 power management board and NVIDIA Jetson Nano board, T300, T200, T100 and ROCK64 board,it can also be used with WeBoost connect RV 65 850012 , Odroid XU4,Odroid XU4Q..
• Tips: Various devices have different plugs size, the voltage and DC plug polarity are internal positive (+) external negative (-), the required current should be less than or equal to this product, please pay attention to the choice, avoid plugs or parameter selection errors can not be used.
• Package include: 1pcs 5V 4A Power Supply. LeTaoXing Provides Friendly Customer Service and if you have any questions with the product, please feel free to contact us and we will provide you a satisfying solution..

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

• 【Mining Rig Frame 】:It is specially designed for cryptocurrency mining (Monero/Ethereum/Ripple/Zerocoin/other)，with 8 GPU slots (but without GPU), has 4 USB ports and 1 VGA ports.Support single power supply(Two cables of the power supply are connected to the motherboard, and the remaining eight cables are connected to the GPU. The power supply can directly supply power to the GPU, and there is no need to supply power to the GPU from the motherboard. ).
• 【8 GPU -16X Slots】: 8* Pcie 3.0 slots on mining motherboard.The spacing between each GPU slot is 65mm (about 2.56in)，gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,because 3060 GPU need dedicated motherboard)..
• 【Upgrade Material】：Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large. The internal motherboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
• 【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch....

LoveRPi Performance Pro Active Cooling Case White for Raspberry Pi 3 ODROID-C2

• MAXIMUM PERFORMANCE: Raspberry Pi 3*/2/B+ and ODROID-C2/C1+**.
• DUAL MODE ACTIVE COOLING: ABS Case comes with 4 Rubber Feet, 8 Screws, Active Cooling Fan 5V or 3.3V Operation.
• ACCESS TO EVERYTHING: Camera Cable Slot, Display Cable Slot, GPIO Cable Slots! Beauty without compromising capability!.
• USABLE WITH TALL HEATSINKS: Fits LoveRPi High Surface Area 10mm Heatsink Set, Keeps Raspberry Pi 3 at Maximum Performance and Cool (under 60C).
• Raspberry Pi 3 MicroSD card slot does not have a spring. PLEASE REMEMBER TO REMOVE THE MICROSD CARD PRIOR TO INSTALLING OR REMOVING THE CASE!.

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

• 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
• 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
• 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
• Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
• Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....

VTRETU GPU Mining Rig， Ethereum Classic Crypto Miner ，with 8 GPU Mining Motherboard and 2000W Power Supply（110-264V） 8 Cooling Fans ，SSD,RAM，CPU,Windows 10(Excluding GPU) White

• 【VTRETU Complete Crypto Mining Rig 】: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining –Monero, Ethereum,ETC, Ripple, Zerocoin, Litecoin ，Dogecoin ，etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
• 【Adapt to universal voltage 】: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90% conversion efficiency. 110V – 264V universal AC input design， supports 8 GPU to work at the same time， allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
• 【8 GPU Mining Motherboard】: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
• 【8 Powerful Fans 】 : This mining rig case is equipped 8*4500rpm cooling fan, 4 (Air in) + 4 (Air out),so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard an....

Linux Ubuntu Metal Sticker 19 x 28mm [898]

• MULTI-OS SUPPORTED: Compatible with Linux Kernels up to 6.0, Ubuntu 22.10 ~ 16.04, Debian 11/10/9/8, Linux Mint 21~18, LMDE 5~1, Kali Linux, Pop!_OS,....
• SUPPORTED ARCHITECTURES: x86_64/x86_32 (PCs, VirtualBox..), aarch64/armhf (Raspberry Pi 2+, Odroid...). UNSUPPORTED DISTRIBUTIONS: currently NOT....
• FAST WI-FI SPEED: You can get 867Mbps Wi-Fi speed on 5GHz band or 300Mbps speed on 2.4GHz band, best choice for online 4K video streaming, gaming,....
• BOOST YOUR WIRELESS RANGE: Comes with 2 Pieces of Long Range WiFi Antennas of 5dBi, this Linux Ubuntu WiFi USB Adapter Ensures Range Extended WiFi....
• ADVANCED WPA3 SECURITY: Secure Your Devices and Network Privacy by Supporting the Latest Wireless Encryption: WPA3-SAE, WPA2/WPA/WEP, AES/PSK/TKIP,....

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

• ?VTRETU Complete Crypto Mining Rig ?: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining -Monero, Ethereum, Ripple, Zerocoin, Litecoin ,Dogecoin ,etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
• ?Adapt to universal voltage ?: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90 percent conversion efficiency. 110V - 264V universal AC input design, supports 8 GPU to work at the same time, allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
• ?8 GPU Mining Motherboard?: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
• ?8 Powerful Fans ? : This mining rig case is equipped 8 x 4500rpm cooling fan, so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.