Reviews odroid Gpio

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Board, ASUS Tinker Board (Black)

  • ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
  • INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
  • QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
  • MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
  • TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best r....
Check Stock

LoveRPi Performance Pro Active Cooling Case White for Raspberry Pi 3 ODROID-C2

  • MAXIMUM PERFORMANCE: Raspberry Pi 3*/2/B+ and ODROID-C2/C1+**.
  • DUAL MODE ACTIVE COOLING: ABS Case comes with 4 Rubber Feet, 8 Screws, Active Cooling Fan 5V or 3.3V Operation.
  • ACCESS TO EVERYTHING: Camera Cable Slot, Display Cable Slot, GPIO Cable Slots! Beauty without compromising capability!.
  • USABLE WITH TALL HEATSINKS: Fits LoveRPi High Surface Area 10mm Heatsink Set, Keeps Raspberry Pi 3 at Maximum Performance and Cool (under 60C).
  • Raspberry Pi 3 MicroSD card slot does not have a spring. PLEASE REMEMBER TO REMOVE THE MICROSD CARD PRIOR TO INSTALLING OR REMOVING THE CASE!.
Check Stock

5V/2A Power Supply US plug

  • Plug specification : inner(positive) diameter 0.8mm and outer(negative) diameter 2.5mm.
  • Tested with ODROID-C2, ODROID-C1+, ODROID-UPS3.
Check Stock

32GB ODROID C2 eMMC 5.0 Module with Android OS

  • ODROID C2 TURBO: eMMC modules designed specifically for the ODROID C2 and makes one of the fastest single board computers on the market EVEN FASTER!.
  • BLAZING PERFORMANCE: MicroSD cards are slow and writes are even slower, eMMC opens a world of possibilities and truly enables the COMPUTER in single....
  • PLUG AND PLAY: Preloaded with Linux OS, the eMMC is plug and play and also comes with an MicroSD adapter for burning your own images.
  • LATEST TECHNOLOGY: Built on the eMMC 5.0 specification, allowing for 120MB+ read and write speed and super low latency.
  • The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2).
Check Stock

RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W

  • 8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
  • Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
  • RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
  • 2x20pin expansion pin header, pin height 10mm/0.39".
  • Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).
Check Stock

SBC Wifi Module 4 for ODROID XU4 C2 C1 H2

  • For those who wants to protect the ODROID-C2 board from dust and the elements.
  • The drawings of the case is open in AutoCAD and STEP format by Hardkernel..
Check Stock

Banana Pi BPI-M5 Amlogic S905X3 Single Board Computer with LPDDR4 4GB RAM and 16GB eMMC Storage for AIOT Support Android Debian Raspbian Armbian

  • [High Performance Processor] Amlogic S905X3 quad-core Cortex-A55 processor (2.0GHz).
  • 16GB eMMC onboard storage ---- MicroSD slot with support for up to 256GB expansion.
  • [4K Smart Home Audio and Video chip] Adopt quad-core 64-bit ARM-A55 architecture CPU chips, integrate G31 graphics processor, support 4K video decoding and 4K video output.
  • [SDK and Various System Operation Support] Banana Pi M5 support multiple various OS, like Android 9, and Raspbian and Linux system, as well as third party image Odroid Android image.
  • [Multifunction Interfaces] 4 x USB 3.0 ports.
  • Power Source: 5 volts at 3 amps via micro USB (TYPE C).
  • [Wifi & BT support via expansion board] BPI M5 support SDIO interface Wifi&BT, you can buy the WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluetooth 5.0..
  • [Wiki] https://wiki.banana-pi.org/Banana_Pi_BPI-M5.
  • If you have any after-sales problems, please contact monica @ smartfire.cn. Click "WayPonDEV" and ask a question or leave the message in our forum at "forum.youyeetoo .com/"..
Check Stock

GeeekPi Raspberry Pi GPIO Extension Board, Raspberry Pi 4 Expansion Board GPIO 1 to 4 for Raspberry Pi 4B / 3B+ / 3B with Screws

  • GPIO Expansion Board for Raspberry Pi----The board is suitable for Raspberry Pi 4B/3B+/3B/3A+/2B+/2B/B.
  • GPIO 1 to 4: One row GPIO port could change to be four rows GPIO ports, will makes your experiment easier and more convenient.
  • This is an upgraded version of the Raspberry Pi GPIO expansion board, which can connect more devices to the same GPIO pin..
  • Package ncludes:1 x Easy Multiplexing Board,4 x Copper stick,4 x Screws,4 x Nuts.
Check Stock

risingsaplings rpi gpio io Expansion Extension Module Board for Raspberry Pi 3 2 Pi Model B+ 4 Zero

  • This GPIO extension board is compatible with Raspberry Pi 3, Pi 2, Model B / B+, ZERO and ZERO-W. (For ZERO you need to soldered a 2x20pin header in your Raspberry Pi ZERO).
  • GPIO 1 to 3: 1 row GPIO ports could expanded into 3 rows GPIO ports..
  • All pins are marked with function names..
  • Come with 4pcs double-screw bolt, 8pcs Screws..
Check Stock

DORHEA 10PCS ESP-WROOM-32D ESP32 Bluetooth and WiFi Low Power Module integrates ESP32-D0WD Generic Wi-Fi+BT+BLE MCU Modules for Voice Encoding Music Streaming and MP3 Decoding

  • ESP32-WROOM-32D are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding..
  • The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications..
  • ESP32-WROOM-32D integrate a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs..
  • Flash integrated on the module and are not recommended for other uses..
Check Stock

5Pcs GPIO Ribbon Cable for Raspberry Pi Male to Female 40pin Breadboard Jumper Wire Computer Accessories 20cm(Male to Female)

  • The GPIO cable can be connected to a 3.5 inch display for easily use.
  • Professional designed for Raspberry Pi male to female GPIO cable.
  • Possess 20cm length and 40pin in total, enough to meet your demands.
  • This cable wire can be used to extend the GPIO of for Raspberry Pi.
  • GPIO wire can be connected to T board, breadboard and other operations.
Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

  • 【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
  • 【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
  • 【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
  • Material: High-quantity copper soft wire material for safe and durable.
  • Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
  • 【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
  • 【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
  • 4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
  • these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit....
Check Stock

HiLetgo GPIO Expansion Board Raspberry Pi Shield for Raspberry PI 4B/3B+ With Screws

  • Raspberry Pi 4B/3B+ GPIO Shield Expansion Board.
  • Multifunction GPIO Extension Board 1 to 3 Port DIY.
Check Stock