Reviews boring Bar Chamfer Tool

TAJIMA Drywall Chamfer - 180mm Sheetrock Trimming Tool with Adjustable 30 Degree Chamfer & Die-Cast Aluminum Base - TBK180-V30

  • 30 DEGREE CHAMFER TOOL - Fluorinated coating applied to aluminum base glides smoothly over materiel producing a flawless chamfered edge on drywall and....
  • SLIP RESISTANT ELASTOMER GRIP - Tajima's chamfer tool features an integrated, slip-resistant grip enhancing usability and safety.
  • DIE-CAST ALUMINUM BASE - Designed with a lightweight yet durable aluminum chassis, this Tajima tool will withstand the rigors of daily professional....
  • ADJUSTABLE CHAMFER - Tajima's chamfer tool features and adjustable chamfer edge ranging from 1mm - 4mm for flexibility on the job..
  • SUPERIOR JAPANESE CONSTRUCTION - Built with durability and quality in mind, Tajima's chamfer tools offer both thoughtful form and functionality that....
Check Stock

Inch External Chamfer Inspection Tool Chamfering Welding Gauge

  • [FUNCTION]External Chamfering Inspection Tool can measure internal or external chamfer.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure of 0-2in, 1/32in increments,+-1/64in accuracy.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
  • [MATERIAL]The Chamfer Tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [PORTABLE]The Chamfer Gauge is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
Check Stock

Arrows Before Bullets (8-Bit)

  • Chamfer Tool - keep your casings smooth and precise with the Hornady Case Prep Center 6-Blade Inside Diameter Chamfer Tool 050172. Designed to remove the burrs from the inside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet is seated.
  • Easy to Use Chamfering Tool Bit - after your cases are cleaned or if you are using new brass you will want to chamfer your cases for a clean smooth cut. This tool is threaded 8-32 so it will work in the Hornady Lock-N-Load Case Prep Trio, Case Prep Center or installed in the Universal Accessory Handle.
  • High Precision & Tough Durability - great chamfer tool bit for reloaders to help keep chamfers and deburrs square with the case mouth, eliminating slippage and reducing errors. Universal design works on all cases 17-45 cal.
  • Remove the Burrs Inside - when there are sharp edges on your brass after trimming, you need to cut them down with this brass chamfer tool. This tool easily removes burs from the case mouth allowing you to seat the bullet without having to worry about the bullet being damaged.
  • Hornady Case Prep Center - with many different options for case prep reloading, Hornady has an option for you. Find the right reloading tools and accessories to compl....
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

EDC Titanium Pry Bar Pocket Pry Bar Multifunction Pry Tool with Pocket Clip

  • [High-quality material]: Titanium pry bar is made of TC4 titanium alloy with precision processing, which has the characteristics of high strength and corrosion resistance, strong and durable..
  • [Specifications]: The pocket EDC pry bar weight is 1.76 ounces, the length is 4.92 inches, the width is 0.57 inches, and the thickness is 0.29 inches..
  • [Good workmanship]: The edc pry tool is cut from the whole piece of titanium alloy by tight processing. The chamfer is rounded, which is safe and convenient to use..
  • [Multi-function]: The main functions of this EDC pry tool include a pry bar, a flat-blade screwdriver and a box opener. With a screwdriver bit insertion slot, it can be matched with screwdriver bits of different specifications..
  • [Portable]: The titanium pry bar has a pocket clip and a lanyard hole for easy carrying. The pocket clip is detachable and can be removed or installed as needed..
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
  • Precision ground and hardened. Completely sealed for maintenance free operation.
Check Stock

W.S Chamfer Gage Chamfering Ruler External Chamfered Inspection Tool Chamfering Gauge Stainless Steel 0-30mm

  • [FUNCTION]External Chamfering Tool can measure internal or external chanfer,Used in mechanical manufacturing, glass processing and other fields.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure range of 0-30mm, 0.5mm increments,+-025mm accuracy.
  • [PORTABLE]The Chamfer Tool total length of 65mm,width 26mm.
  • is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
  • [MATERIAL]The welding inspection tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

  • 【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
  • 【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
  • 【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
  • 【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
  • 【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock